American Defense Manufacturing Ad Scout Optics Mount 30mm Scout Mount 2" Offset US Specifications
Gun Optics Mount Sets by American Defense
|
Technical data & information: One-piece integral base and rings designed for traditional optics or similar sights that require two, 30mm rings for additional support. Available in three different lengths for proper eye relief adjustment. Ad-scout-s is standard length for mounting traditional optics. Ad-scout cantilever positions optics farther forward to provide 1" of extra space at the rear for mounting night-vision devices or when additional eye-relief is needed. Ad-scout-x uses the same great cantilever design as the ad-scout cantilever, but position's optics 2" farther forward for maximum room at the rear for mounting night-vision devices or making eye-relief adjustments. Mfg: american defense manufacturing specs: 6061 t6 aluminum, hardcoat t3 mil-spec anodized, matte black. Height measured from top of rail to bottom of scope body, .87" (2.2cm) high. Distance between rings, 2" (6.3cm.) high. 7.1 ounces (201g) weight. Ad-scout, s, 4" (11.4 cm) oal. Ad-scout cantilever, 6" (15.2cm) oal. Ad-scout -. US specification & reliable quality gun optics mount sets by American Defense. Part Nr: ADSCOUT30STD.
 Indicative Price: USD 156.99
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more high specification gun & shooting items : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Zro Delta Dloc Acog Optic Mount US Specifications
USD 130.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: Easily remove and reattach your acog with assured return to zero every time when you have the zrodelta's dloc-acog mount. With 10 solid engagement points and 3 recoil lugs, the dloc-acog grabs your rifle's receiver rail and hangs on like an angry pit bull. Thanks to heavy-duty springs on the side locking bar, one-handed installation is also a cinch: loosen the screw knob, snap the mount on your rail, then just finger-tighten the dloc-acog's knob to lock it in place so it won't rattle loose. Need to access back up sights or a secondary optic pdq? just loosen the finger nut and remove the mount. Fits all trijicon acogs & acog-style optics using triji mfg: zro delta. US specification & reliable quality gun optics mount sets by ZRO Delta. Part Nr: 7.023E+11.
More Details : click here
SEARCH this site : click here
|
|
|
Talley Light Weight Scope Mount Remington 700 30mm Medium Scope Mount US Specifications
USD 46.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: One-piece construction blends the ring and base into a single unit. Eliminating the ring/base joint not only keeps weight to a minimum, it provides a stronger mount. Each ring cap is 5⁄8" wide, with four, torx screws, to keep large scopes from slipping or shifting. Designed by mel forbes of new ultralight arms. Mfg: talley specs: 7000 series aluminum, black, anodized, matte finish. Accepts 1" dia. Scopes, unless otherwise listed in fits column for 30mm dia. Scopes. Height from bottom of ring to top of receiver: low, .400" (10.1mm), med, .500" (12.7mm). High, .640" (16.3mm), x‑high, .740" (18.8mm). Approx. We. US specification & reliable quality gun optics mount sets by Talley. Part Nr: 740700.
More Details : click here
SEARCH this site : click here
|
|
|
Spuhr Isms Picatinny Mounts 34mm Isms Mount 121mm Mounting Length 31 Moa US Specifications
USD 410
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: The isms (ideal scope mount system) is an extremely sturdy scope mount, with the possibility to attach multiple optical accessories directly to the mount. Built-in scope level and 45-degree split of the rings provides unobstructed view of your optics knobs. The durable design of the mounts prevents damage to the scope due to flexing during heavy recoil. The rings are grooved on the inside for better grip and the mount base is milled from a sinlge billet of aluminum. Mounts include an innovative tool to index your scope properly to the mount and gun. Mounts have a minimum of 7 interfaces for accessories to be mounted. The rings are cut at a 45 degree angle instead of horizontally, prov mfg: spuhr. US specification & reliable quality gun optics mount sets by Spuhr. Part Nr: SP4901.
More Details : click here
SEARCH this site : click here
|
|
|
Badger Ordnance Light Rifle Embedded Front Rail Mount US Specifications
USD 326.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: Badger ordnance's lr-efr, light rifle embedded front rail, lets you install a night vision integration system on a rifle with a lightweight, narrow forend. The badger ordnance lr-efr provides 7-1/2" of rail space on top, plus 5" on each side, and a 3-7/8" bottom rail for plenty of accessory mounting acreage. Maximum barrel diameter at tip of the forend 1.75" for use with a/n pvs-22/27 and similar systems gunsmith installation recommended the badger ordnance lr-efr is machined from 6061 t6 aluminum alloy for excellent of strength without adding unnecessary weight to the front of your rifle. Matte black hardcoat anodized finish. Mfg: badger ordnance. US specification & reliable quality gun optics mount sets by Badger. Part Nr: 30687.
More Details : click here
SEARCH this site : click here
|
|
|
American Defense Manufacturing Ad Scout Optics Mount 30mm Scout Mount No Offset US Specifications
USD 142.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: One-piece integral base and rings designed for traditional optics or similar sights that require two, 30mm rings for additional support. Available in three different lengths for proper eye relief adjustment. Ad-scout-s is standard length for mounting traditional optics. Ad-scout cantilever positions optics farther forward to provide 1" of extra space at the rear for mounting night-vision devices or when additional eye-relief is needed. Ad-scout-x uses the same great cantilever design as the ad-scout cantilever, but position's optics 2" farther forward for maximum room at the rear for mounting night-vision devices or making eye-relief adjustments. Mfg: american defense manufacturing specs: 6061 t6 aluminum, hardcoat t3 mil-spec anodized, matte black. Height measured from top of rail to bottom of scope body, .87" (2.2cm) high. Distance between rings, 2" (6.3cm.) high. 7.1 ounces (201g) weight. Ad-scout, s, 4" (11.4 cm) oal. Ad-scout cantilever, 6" (15.2cm) oal. Ad-scout -. US specification & reliable quality gun optics mount sets by American Defense. Part Nr: ADSCOUTS30STD.
More Details : click here
SEARCH this site : click here
|
|
|
Burris Ar Pepr Permanent Mounts 30mm Ar Pepr Mount US Specifications
USD 89.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: One-piece cantilever mount with integral rings positions the optic almost 2" farther forward to provide extra clearance needed for a night vision device (nvd), add-on magnifier, or long eye relief scope. The "proper eye position ready" mount also features built-in, two-slot rails on the tops of the rings for convenient mounting of reflex sights or other accessories. Each top ring strap is secured with six torx screws to prevent recoil-induced slippage. Side locking bar with two, steel hex nuts and cross-bolts hold tight on any picatinny receiver rail. Smooth contours and radiused edges give a streamlined appearance, reduce weight, and prevent snagging. Mfg: burris specs: aluminum, hardcoat anodized, matte black. 5.3" (13.5cm) long, 1.6" (4.1cm) wide, 2.4" (6.1cm) overall height. Height from top of rail to bottom of ring: 1" (2.5cm). 8.7 oz. (247g) weight. Fits scopes with 1" tube. Mounts to mil-std 1913 picatinny rails. US specification & reliable quality gun optics mount sets by Burris. Part Nr: 410341.
More Details : click here
SEARCH this site : click here
|
|
|
Wilson Combat Ar 15/M16 Accu Rizer Flattop Scope Mount Accu Rizer Scope Mount 30mm US Specifications
USD 159.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: One-piece riser mount with integral rings provides additional elevation from top of rail to centerline of ring to ensure a proper cheek weld. Precision machined from aluminum bar stock for a secure fit on flattop receiver rail. Scope and mount form a single unit for fast attachment and removal without loss of zero. Mounts by hand tightening the oversized thumb screw to clamp the locking plate. The captive, spring-loaded locking plate maintains a positive mechanical connection that resists loosening under shock and vibration. Four hardened torx-head screws clamp each ring cap to the lower half. Models available for scopes with 1" or 30mm diameter bodies. 1" and 30mm model&rsquo mfg: wilson combat specs: aluminum, hardcoat anodized, black. Approx. 5" (12.7cm) long, 17⁄8" (4.8cm) wide. Approx. 8 oz. (227g) weight. 1", height from top of base to inside bottom of ring: 1.2" (30.5mm). 30mm, height from top of base to inside bottom of ring: 1" (2.5mm). US specification & reliable quality gun optics mount sets by Wilson. Part Nr: TRARMOUNT30.
More Details : click here
SEARCH this site : click here
|
|
|
Gg&G M1a Socom Ii Quick Detach Scope Mount M1a Socom Ii Qd Scope Mount US Specifications
USD 163.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: The socom ii m1a rifle is a compact, powerful close quarter combat battle rifle. However its "cluster rail" system makes it difficult to mount a conventional low powered scope. You have to install an additional receiver mounted scope base to the socom ii along with a set of scope rings that are tall enough so that the objective lens clears the top rail. If you want quick detach capability, you need to mount your scope on top of the receiver mounted scope base with some type of qd mount and ring combo. We think that's a pia and has too many interface points that could negatively affect the zero retention of your scope. The new products team at gg&g has come up with an inn mfg: gg&g, inc. Specs: 2.5" measurement inside ring face to inside ring face allows for forward/rearward adjustment of different eye releif scopes. 1.260" from top of the rail to center of 30mm integral rings, provides lower scope mounting while still clearing the objective lens of most scopes up to 50. US specification & reliable quality gun optics mount sets by GG&G. Part Nr: GGG1433.
More Details : click here
SEARCH this site : click here
|
|
|
Talley Light Weight Scope Mount Kimber Model 84 Current Production Med 30mm Scope Mounts US Specifications
USD 46.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: One-piece construction blends the ring and base into a single unit. Eliminating the ring/base joint not only keeps weight to a minimum, it provides a stronger mount. Each ring cap is 5⁄8" wide, with four, torx screws, to keep large scopes from slipping or shifting. Designed by mel forbes of new ultralight arms. Mfg: talley specs: 7000 series aluminum, black, anodized, matte finish. Accepts 1" dia. Scopes, unless otherwise listed in fits column for 30mm dia. Scopes. Height from bottom of ring to top of receiver: low, .400" (10.1mm), med, .500" (12.7mm). High, .640" (16.3mm), x‑high, .740" (18.8mm). Approx. We. US specification & reliable quality gun optics mount sets by Talley. Part Nr: 748749.
More Details : click here
SEARCH this site : click here
|
|
|
J P Enterprises Ar 15/M16 Flattop Optic Mount Jp Flattop Scope Mount 1"/30mm US Specifications
USD 170.95
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: One-piece, aluminum mount with integral rings is precision machined to true mil-std 1913 picatinny specs for a secure fit on flattop receiver rails. Ring height and forward offset are ideal for use with long eye relief scopes. Mounts available for 1"/30mm and 34mm scope tubes. 1"/30mm mount accepts scopes with both 30mm tubes and, using the included polymer adapter shims, 1" tubes. Torx head screws (4 on 1"/30mm, 6 on 34mm and 35mm) secure each top ring strap to hold the optics tight under heavy recoil. Full-length base clamps to the receiver with five, equally spaced crossbolts for a rock-solid fit and zero movement. Mfg: j p enterprises specs: 6061 t6 aluminum, hardcoat anodized, matte black. Includes instructions and t15 and t20 torx wrenches. 1"/30mm, approximately 5β½" (14cm) long, 1βύ" (4.4cm) wide, 21⁄8" (5.4cm) high. 7.1 oz. (201 g) weight. Elevates a 30mm optic .965" (24.5mm), m. US specification & reliable quality gun optics mount sets by JP. Part Nr: JPFTSM301.
More Details : click here
SEARCH this site : click here
|
|
|
Talley Light Weight Scope Mount Anschutz 54 1" Medium Scope Mount US Specifications
USD 46.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: One-piece construction blends the ring and base into a single unit. Eliminating the ring/base joint not only keeps weight to a minimum, it provides a stronger mount. Each ring cap is 5⁄8" wide, with four, torx screws, to keep large scopes from slipping or shifting. Designed by mel forbes of new ultralight arms. Mfg: talley specs: 7000 series aluminum, black, anodized, matte finish. Accepts 1" dia. Scopes, unless otherwise listed in fits column for 30mm dia. Scopes. Height from bottom of ring to top of receiver: low, .400" (10.1mm), med, .500" (12.7mm). High, .640" (16.3mm), x‑high, .740" (18.8mm). Approx. We. US specification & reliable quality gun optics mount sets by Talley. Part Nr: 940754.
More Details : click here
SEARCH this site : click here
|
|
|
Nikon M Tactical 1 Piece Scope Mount 30mm Rings 30mm 20 Moa 1 Piece Scope Mount US Specifications
USD 76.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: The lightweight m-tactical 30mm one-piece scope mount clamps to any ar-15 flattop receiver and is custom engineered to provide optimum height and eye relief for nikon's m-tactical series of scopes. In fact, it's so versatile, it can be used with a wide variety of other optics with 30mm o.D. Tubes that call for an easy-to-install picatinny mount. The m-tactical one-piece mount's cantilever extends approximately 2" forward of the receiver to accommodate long scopes and those with long eye relief. Two steel crossbolts and the full-length clamping bar secure the mount to any mil-std 1913 picatinny receiver rail. Lightweight strong aluminum construc mfg: nikon. US specification & reliable quality gun optics mount sets by Nikon. Part Nr: 840.
More Details : click here
SEARCH this site : click here
|
|
|
Talley Light Weight Scope Mount Remington 700/725 Sa Medium 1" Scope Mounts 20 Moa US Specifications
USD 69.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: One-piece construction blends the ring and base into a single unit. Eliminating the ring/base joint not only keeps weight to a minimum, it provides a stronger mount. Each ring cap is 5⁄8" wide, with four, torx screws, to keep large scopes from slipping or shifting. Designed by mel forbes of new ultralight arms. Mfg: talley specs: 7000 series aluminum, black, anodized, matte finish. Accepts 1" dia. Scopes, unless otherwise listed in fits column for 30mm dia. Scopes. Height from bottom of ring to top of receiver: low, .400" (10.1mm), med, .500" (12.7mm). High, .640" (16.3mm), x‑high, .740" (18.8mm). Approx. We. US specification & reliable quality gun optics mount sets by Talley. Part Nr: 940700SM.
More Details : click here
SEARCH this site : click here
|
|
|
Zro Delta Dloc Ba Low Profile Scope Mount 30mm Dloc Ba Low Profile Scope Mount US Specifications
USD 251.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: Designed specifically for bolt action rifles and other low profile applications, the zrodelta dloc-ba low profile scope mount gives you fast attachment and removal capabilities without the loss of zero. The one piece aluminum base, with integrated rings, eliminates the joint between the base and rings, ensuring a rigid platform that prevents the scope from kinking while reducing ring alignment problems. Sixteen engagement points, plus six recoil lugs, along the full length base ensures the mount can get a solid bite on your top rail space for improved stability. Heavy duty springs inside the dloc system clamps down tightly on the rail the instant slap it in place, so if you don&rsquo mfg: zro delta. US specification & reliable quality gun optics mount sets by ZRO Delta. Part Nr: 7.024E+11.
More Details : click here
SEARCH this site : click here
|
|
|
Spuhr Isms Picatinny Mounts 40mm 1.181" 20.6 Moa Unimount US Specifications
USD 410
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: The isms (ideal scope mount system) is an extremely sturdy scope mount, with the possibility to attach multiple optical accessories directly to the mount. Built-in scope level and 45-degree split of the rings provides unobstructed view of your optics knobs. The durable design of the mounts prevents damage to the scope due to flexing during heavy recoil. The rings are grooved on the inside for better grip and the mount base is milled from a sinlge billet of aluminum. Mounts include an innovative tool to index your scope properly to the mount and gun. Mounts have a minimum of 7 interfaces for accessories to be mounted. The rings are cut at a 45 degree angle instead of horizontally, prov mfg: spuhr. US specification & reliable quality gun optics mount sets by Spuhr. Part Nr: SP7601.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: American Defense Manufacturing Ad Scout Optics Mount 30mm Scout Mount 2" Offset US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
