American Defense Manufacturing Recon S No Offset Scope Mount Recon 1 20 Moa Scope Mount No Offset US Specifications
Gun Optics Mount Sets by American Defense
|
Technical data & information: Quick-release lever-lock system clamps solidly to flattop rail and will not work loose even under heavy recoil-the more force acting on the lever, the tighter it locks. Depress the release tab to swing the lever open, and the mount easily lifts off the rifle. Adjustable with a flat head screwdriver or even a coin for an ultra-secure, no-slip fit on almost any picatinny or weaver-style rail, including over- or under-sized commercial rails. Lever may be configured to lock to the front or the rear to suit the operator's preference. Large locking bar on the side of the mount engages the maximum amount of rail area, while the crossbolt and two integral locking lugs ensure rock-soli mfg: american defense manufacturing specs: 6061 t6 aluminum, hardcoat anodized, matte black. 4ß½" (11.4cm) long. Each ring covers 1" (2.5cm) of scope tube length. Height measured from top of rail to bottom of scope body (both models): .890". US specification & reliable quality gun optics mount sets by American Defense. Part Nr: ADRECONS20MOA1S.
 Indicative Price: USD 169.99
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more high specification gun & shooting items : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Talley Light Weight Scope Mount Mauser 98 Large Ring 1" Low Scope Mount US Specifications
USD 46.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: One-piece construction blends the ring and base into a single unit. Eliminating the ring/base joint not only keeps weight to a minimum, it provides a stronger mount. Each ring cap is 5⁄8" wide, with four, torx screws, to keep large scopes from slipping or shifting. Designed by mel forbes of new ultralight arms. Mfg: talley specs: 7000 series aluminum, black, anodized, matte finish. Accepts 1" dia. Scopes, unless otherwise listed in fits column for 30mm dia. Scopes. Height from bottom of ring to top of receiver: low, .400" (10.1mm), med, .500" (12.7mm). High, .640" (16.3mm), x‑high, .740" (18.8mm). Approx. We. US specification & reliable quality gun optics mount sets by Talley. Part Nr: 930709.
More Details : click here
SEARCH this site : click here
|
|
|
Talley Light Weight Scope Mount Winchester 70 .860" Rear 1" Low Scope Mount US Specifications
USD 46.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: One-piece construction blends the ring and base into a single unit. Eliminating the ring/base joint not only keeps weight to a minimum, it provides a stronger mount. Each ring cap is 5⁄8" wide, with four, torx screws, to keep large scopes from slipping or shifting. Designed by mel forbes of new ultralight arms. Mfg: talley specs: 7000 series aluminum, black, anodized, matte finish. Accepts 1" dia. Scopes, unless otherwise listed in fits column for 30mm dia. Scopes. Height from bottom of ring to top of receiver: low, .400" (10.1mm), med, .500" (12.7mm). High, .640" (16.3mm), x‑high, .740" (18.8mm). Approx. We. US specification & reliable quality gun optics mount sets by Talley. Part Nr: 930702.
More Details : click here
SEARCH this site : click here
|
|
|
Zro Delta Dloc Hamr Optic Mount Dloc Micro T1 Optic Mount US Specifications
USD 116.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: Zrodelta's dloc-micro mount for the aimpoint micro t1 red dot sight grabs onto your rifle's picatinny top rail with a vise-like hold that that ain't gonna shake loose, no matter how hard you try to part them. That's because the dloc-micro comes with three crossbolts that also serve as recoil lugs and a spring-loaded clamping side bar that locks itself on the rail the instant you snap it on. Not only does the zrodelta dloc-micro work for the t1, but will also accept the aimpoint micro t-2 / h-1 / h-2, vortex sparc ii, and the hi-lux micro-max b-dot. Take it off your rifle to access your backup "iron" sights or secondary optic, and it will still retain mfg: zro delta. US specification & reliable quality gun optics mount sets by ZRO Delta. Part Nr: 7.023E+11.
More Details : click here
SEARCH this site : click here
|
|
|
Spuhr Quick Detach Isms Qdp Mount 40mm 1.5" 0 Moa Qdp Mount US Specifications
USD 495
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: The spuhr qdp mount is an extremely sturdy one-piece scope mount that clamps directly to any mil-std 1913 picatinny receiver rail or base. It combines the rock-solid stability of spuhr's proven ideal scope mounting system (isms) with easy-to-operate quick-release levers that let you attach and remove the spuhr qdp mount from your rifle with the mount and the scope as a single unit. The spuhr qdp mount has 45-degree split rings designed so the bulkiest part of the rings is not in your line of sight of the scope turrets. Another innovation is a bubble level built into the base to help you make sure the rifle is perfectly level, helping you control another important variable in lo mfg: spuhr. US specification & reliable quality gun optics mount sets by Spuhr. Part Nr: QDP7002.
More Details : click here
SEARCH this site : click here
|
|
|
Zro Delta Dloc Venom Optic Mount US Specifications
USD 134.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: The low profile, zrodelta dloc-venom optic mount is a handy way to mount a red dot sight onto your rifle, pistol, or tactical shotgun. Easy to install, mount has heavy duty springs inside the side bar that clamp down hard, even before you tighten it. Makes one handed mounting a breeze, plus it won't rattle loose under the most heavy duty abuse. Fits the vortex venom red dot, vortex viper, burris fastfire ii & iii, some docter models attaches to m1913 picatinny rail systems can be mounted for left or right handed shooters tightening knob allows for hand tightening to rail without worry of mount integrity designed to allow for quick detachment/attac mfg: zro delta. US specification & reliable quality gun optics mount sets by ZRO Delta. Part Nr: 7.023E+11.
More Details : click here
SEARCH this site : click here
|
|
|
Geissele Automatics Ar 15 Super Precision Scope Mount 30mm 2.04" Height Cantilever Scope Mount US Specifications
USD 325
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: For ar-style rifle owners who've ever tried shooting with any kind of cumbersome mask attached, whether a gas mask or other protective gear, they know that it's near impossible to get the cheek weld necessary for a solid sight picture. The geissele super precision scope mount is designed to solve this issue. Each geissele super precision scope mount is a single-piece unit machined from battle-proven 7075-t6 aluminum and attaches to a compatible ar-15 with an enhanced nut-and-bolt clamp designed by company engineers that attaches to the gun with 2,800 pounds of force. 0 moa elevation matte-black finish height: 2.04 inches fits 30mm-diameter optics tub mfg: geissele automatics llc. US specification & reliable quality gun optics mount sets by Geissele. Part Nr: 05549B.
More Details : click here
SEARCH this site : click here
|
|
|
Vortex Optics 30mm Precision Qr Extended Cantilever Mount 30mm Qr Cantilever Mount 2 Offset US Specifications
USD 229.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: The vortex 30mm precision qr extended cantilever mount with 2" offset is designed for mounting 30mm optics on flattop ar-15s. Engineered to provide optimum height and eye relief, the vortex 30mm precision qr extended cantilever mount with 2" offset is a one-piece, aluminum mount, with integrated rings no need for an extended riser or separate rings. Precision machined from 6061 t6 aluminum hard coat type 3 mil-spec anodized positions center of scope 1.45" above the rail the vortex 30mm precision qr extended cantilever mount is a rock-solid optics mounting platform with a dual release lever system that securely grabs the rail in two places a mfg: vortex optics. US specification & reliable quality gun optics mount sets by Vortex. Part Nr: CM404.
More Details : click here
SEARCH this site : click here
|
|
|
Talley Light Weight Scope Mount Remington 700/725 La High 30mm Scope Mounts 20 Moa US Specifications
USD 69.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: One-piece construction blends the ring and base into a single unit. Eliminating the ring/base joint not only keeps weight to a minimum, it provides a stronger mount. Each ring cap is 5⁄8" wide, with four, torx screws, to keep large scopes from slipping or shifting. Designed by mel forbes of new ultralight arms. Mfg: talley specs: 7000 series aluminum, black, anodized, matte finish. Accepts 1" dia. Scopes, unless otherwise listed in fits column for 30mm dia. Scopes. Height from bottom of ring to top of receiver: low, .400" (10.1mm), med, .500" (12.7mm). High, .640" (16.3mm), x‑high, .740" (18.8mm). Approx. We. US specification & reliable quality gun optics mount sets by Talley. Part Nr: 750700LM.
More Details : click here
SEARCH this site : click here
|
|
|
A.R.M.S. Inc Aimpoint Throw Lever Ring & Mount Mkii Throw Lever Mount US Specifications
USD 118.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: Compact, single-ring mount for aimpoint compml, compml2, compml3, or similar red dot sight requiring a single 30mm ring. The top half of the ring is machined steel for superior strength and secured by four hex-head screws (wrench included) to ensure full contact with the sight body. Spacer raises the aimpoint comp mount β½" for co-witness with iron sights when mounting directly to flattop receivers. Can also be used on #22tx30 trijicon tri-power mount. Mfg: a.R.M.S.,inc specs: mount -hardcoat anodized aluminum and parkerized steel, matte black. 2-5/16" (5.6 cm) long. 3.9 oz. (109 g) wt. Spacer aluminum, hardcoat anodized, matte black. 2.3" (58mm) long, .54"(13 mm) high. 1 oz. (28g) wt. Mounting screws included. US specification & reliable quality gun optics mount sets by ARMS. Part Nr: 22M68LII.
More Details : click here
SEARCH this site : click here
|
|
|
Spuhr Isms Picatinny Mounts 34mm 1.18" 10.3 Moa Unimount US Specifications
USD 410
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: The isms (ideal scope mount system) is an extremely sturdy scope mount, with the possibility to attach multiple optical accessories directly to the mount. Built-in scope level and 45-degree split of the rings provides unobstructed view of your optics knobs. The durable design of the mounts prevents damage to the scope due to flexing during heavy recoil. The rings are grooved on the inside for better grip and the mount base is milled from a sinlge billet of aluminum. Mounts include an innovative tool to index your scope properly to the mount and gun. Mounts have a minimum of 7 interfaces for accessories to be mounted. The rings are cut at a 45 degree angle instead of horizontally, prov mfg: spuhr. US specification & reliable quality gun optics mount sets by Spuhr. Part Nr: SP4301.
More Details : click here
SEARCH this site : click here
|
|
|
Spuhr Isms Picatinny Mounts 34mm Isms Mount 121mm Mounting Length 20.6 Moa Type SP4602 US Specifications
USD 410
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: The isms (ideal scope mount system) is an extremely sturdy scope mount, with the possibility to attach multiple optical accessories directly to the mount. Built-in scope level and 45-degree split of the rings provides unobstructed view of your optics knobs. The durable design of the mounts prevents damage to the scope due to flexing during heavy recoil. The rings are grooved on the inside for better grip and the mount base is milled from a sinlge billet of aluminum. Mounts include an innovative tool to index your scope properly to the mount and gun. Mounts have a minimum of 7 interfaces for accessories to be mounted. The rings are cut at a 45 degree angle instead of horizontally, prov mfg: spuhr. US specification & reliable quality gun optics mount sets by Spuhr. Part Nr: SP4602.
More Details : click here
SEARCH this site : click here
|
|
|
Spuhr Isms Picatinny Mounts 34mm Isms Mount 121mm Mounting Length 44.4 Moa US Specifications
USD 410
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: The isms (ideal scope mount system) is an extremely sturdy scope mount, with the possibility to attach multiple optical accessories directly to the mount. Built-in scope level and 45-degree split of the rings provides unobstructed view of your optics knobs. The durable design of the mounts prevents damage to the scope due to flexing during heavy recoil. The rings are grooved on the inside for better grip and the mount base is milled from a sinlge billet of aluminum. Mounts include an innovative tool to index your scope properly to the mount and gun. Mounts have a minimum of 7 interfaces for accessories to be mounted. The rings are cut at a 45 degree angle instead of horizontally, prov mfg: spuhr. US specification & reliable quality gun optics mount sets by Spuhr. Part Nr: SP4801.
More Details : click here
SEARCH this site : click here
|
|
|
Talley Light Weight Scope Mount Anschutz 54 1" Medium Scope Mount US Specifications
USD 46.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: One-piece construction blends the ring and base into a single unit. Eliminating the ring/base joint not only keeps weight to a minimum, it provides a stronger mount. Each ring cap is 5⁄8" wide, with four, torx screws, to keep large scopes from slipping or shifting. Designed by mel forbes of new ultralight arms. Mfg: talley specs: 7000 series aluminum, black, anodized, matte finish. Accepts 1" dia. Scopes, unless otherwise listed in fits column for 30mm dia. Scopes. Height from bottom of ring to top of receiver: low, .400" (10.1mm), med, .500" (12.7mm). High, .640" (16.3mm), x‑high, .740" (18.8mm). Approx. We. US specification & reliable quality gun optics mount sets by Talley. Part Nr: 940754.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: American Defense Manufacturing Recon S No Offset Scope Mount Recon 1 20 Moa Scope Mount No Offset US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
