Apex Tool Group Swiss Pattern Barrette Files 6" Barrette #2 Cut US Specifications
Gunsmith Files by Apex
|
Technical data & information: These beautiful little swiss pattern files are made especially for getting into tight places, coming exactly up to right angles, working over dovetails, slots and other precision filing. Flat side has double-cut teeth. Back and edges are safe (no teeth) with edges beveled back on 33β° angle. Taper from maximum width shown below to long point. Mfg: apex tool group specs: 4 (10.2cm), 1/2" (12.7mm) wide. #0 or #1 cut. 6" (15.2cm), 11/16" (17.5mm) wide. #0, #1 or #2 cut. Vkhilfef corresponds to swiss cut no. 1. US specification & reliable quality gunsmith files by Apex. Part Nr: 35073.
 Indicative Price: USD 38.99
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more high specification gun & shooting items : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Brownells File Chalk 6 Pieces US Specifications
USD 6.99
(Indicative price - actual current price possibly lower)
Gunsmith Files US Specifications
Technical data & information: Filling file teeth with this chalk is an age old "gunsmith kink"® to prevent "pinning", the buildup of metal chips in the teeth of the file. It increases the effectiveness of the file, extends file life, and produces a smoother, more professional finish. Metal removal is faster and easier, too. An inexpensive time and money saver. For superior results, use file chalk along with a good file card, listed elsewhere. Mfg: brownells specs: 4" (10.2cm) long, 1" (2.5cm) diameter 2 pieces per tube. US specification & reliable quality gunsmith files by Brownells. Part Nr: 333.
More Details : click here
SEARCH this site : click here
|
|
|
Friedr. Dick Gmbh Professional Gunsmith Needle File Set Professional Gunsmith Needle File Cut #3 Hand US Specifications
USD 11.99
(Indicative price - actual current price possibly lower)
Gunsmith Files US Specifications
Technical data & information: Finest professional quality gunsmith needle files in set of 12 assorted shapes. Made of best materials to rigid quality standards. Cuts are deep and durable. Knurled handles for no-slip use or convenient lock-up in needle file handles shown below. Comes in heavy-duty, see-through, pocketed roll with snap closure. Protects files, yet gives immediate access to shape wanted. Sold in sets or singles. Mfg: friedr. Dick gmbh specs: set contains 1 each of the following shapes: barrette, hand, hand with round edges, warding, crochet, three square, square, half round, round, knife, slitting and crossing. Approx. 5-1/2" (14cm) overall length. Shank 2-3/8" (6cm) x 1/8" (3.2mm) dia. US specification & reliable quality gunsmith files by Freed. Part Nr: 21121430.
More Details : click here
SEARCH this site : click here
|
|
|
Friedr. Dick Gmbh Screw Slot Files Screw Equalling File #6 .040 US Specifications
USD 47.99
(Indicative price - actual current price possibly lower)
Gunsmith Files US Specifications
Technical data & information: Making screw slots is a delicate operation and only the finest, most precise files will do. These are the ones! six sizes and two styles let you cut even the super-thin european slots. Doing the job right takes both a joint file that cuts only on the edges and won't widen the slot as it deepens, and an equalling file to clean up the slot sides and square the bottom. Available in matched, same-size pairs, 1 joint and 1 equalling. Plus, there's the master screw slot set with all twelve files to cover any slotting job. Individual files also available. Note: these files are very thin and easily bent or broken. Sorry, cannot guarantee. Mfg: friedr. Dick gmbh specs: 5-5/8" (14.3cm) long. Both joint and equalling files of the same no. Are the same thickness. Shipping weight 1/4 lb. US specification & reliable quality gunsmith files by Freed. Part Nr: 11181030.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells File Chalk 12 Pieces US Specifications
USD 13.99
(Indicative price - actual current price possibly lower)
Gunsmith Files US Specifications
Technical data & information: Filling file teeth with this chalk is an age old "gunsmith kink"® to prevent "pinning", the buildup of metal chips in the teeth of the file. It increases the effectiveness of the file, extends file life, and produces a smoother, more professional finish. Metal removal is faster and easier, too. An inexpensive time and money saver. For superior results, use file chalk along with a good file card, listed elsewhere. Mfg: brownells specs: 4" (10.2cm) long, 1" (2.5cm) diameter 2 pieces per tube. US specification & reliable quality gunsmith files by Brownells. Part Nr: 080-705-012.
More Details : click here
SEARCH this site : click here
|
|
|
Friedr. Dick Gmbh Screw Slot Files Screw Equalling File #4 .025 US Specifications
USD 47.99
(Indicative price - actual current price possibly lower)
Gunsmith Files US Specifications
Technical data & information: Making screw slots is a delicate operation and only the finest, most precise files will do. These are the ones! six sizes and two styles let you cut even the super-thin european slots. Doing the job right takes both a joint file that cuts only on the edges and won't widen the slot as it deepens, and an equalling file to clean up the slot sides and square the bottom. Available in matched, same-size pairs, 1 joint and 1 equalling. Plus, there's the master screw slot set with all twelve files to cover any slotting job. Individual files also available. Note: these files are very thin and easily bent or broken. Sorry, cannot guarantee. Mfg: friedr. Dick gmbh specs: 5-5/8" (14.3cm) long. Both joint and equalling files of the same no. Are the same thickness. Shipping weight 1/4 lb. US specification & reliable quality gunsmith files by Freed. Part Nr: 11180630.
More Details : click here
SEARCH this site : click here
|
|
|
Friedr. Dick Gmbh Professional Gunsmith Needle File Set Professional Gunsmith Needle File Cut #1 Round US Specifications
USD 11.99
(Indicative price - actual current price possibly lower)
Gunsmith Files US Specifications
Technical data & information: Finest professional quality gunsmith needle files in set of 12 assorted shapes. Made of best materials to rigid quality standards. Cuts are deep and durable. Knurled handles for no-slip use or convenient lock-up in needle file handles shown below. Comes in heavy-duty, see-through, pocketed roll with snap closure. Protects files, yet gives immediate access to shape wanted. Sold in sets or singles. Mfg: friedr. Dick gmbh specs: set contains 1 each of the following shapes: barrette, hand, hand with round edges, warding, crochet, three square, square, half round, round, knife, slitting and crossing. Approx. 5-1/2" (14cm) overall length. Shank 2-3/8" (6cm) x 1/8" (3.2mm) dia. US specification & reliable quality gunsmith files by Freed. Part Nr: 21621410.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Metal Checkering Files 40 Lpi (#1) US Specifications
USD 51.99
(Indicative price - actual current price possibly lower)
Gunsmith Files US Specifications
Technical data & information: The only way to get true, accurate line spacing when checkering backstraps, triggerguards, grip frames, ribs and hammer spurs; anywhere an improved gripping surface is needed. Finer cuts give a nice matting effect to reduce glare and light distortion. Procedure is very similar to wood checkering. Layout your master lines (or use a guide like our .45 checkering guide), then establish the pattern by moving the file a few teeth each time using the previous lines as the guide. Once the pattern is fully laid out, bring to final depth with a 60β° needle file. Mfg: brownells specs: 8" (20.3cm) length x β½" (12.7mm) wide. Cutting area: 6" (15.2cm) x β½" (12.7mm). US specification & reliable quality gunsmith files by Brownells. Part Nr: 31042.
More Details : click here
SEARCH this site : click here
|
|
|
Friedr. Dick Gmbh Screw Slot Files Screw Equalling File #3 .021 US Specifications
USD 36.99
(Indicative price - actual current price possibly lower)
Gunsmith Files US Specifications
Technical data & information: Making screw slots is a delicate operation and only the finest, most precise files will do. These are the ones! six sizes and two styles let you cut even the super-thin european slots. Doing the job right takes both a joint file that cuts only on the edges and won't widen the slot as it deepens, and an equalling file to clean up the slot sides and square the bottom. Available in matched, same-size pairs, 1 joint and 1 equalling. Plus, there's the master screw slot set with all twelve files to cover any slotting job. Individual files also available. Note: these files are very thin and easily bent or broken. Sorry, cannot guarantee. Mfg: friedr. Dick gmbh specs: 5-5/8" (14.3cm) long. Both joint and equalling files of the same no. Are the same thickness. Shipping weight 1/4 lb. US specification & reliable quality gunsmith files by Freed. Part Nr: 11180530.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Apex Tool Group Swiss Pattern Barrette Files 6" Barrette #2 Cut US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
