Badger Ordnance 30mm Usmc Dmr Scope Rings 1.031 US Specifications
Gun Scope Rings by Badger
|
Technical data & information: Badger ordnance's dmr 30mm scope rings were specifically designed for the usmc designated marksman rifle and are optimized for use on the m14/m1a platform. They will work on any rifle with a mil-std 1913 picatinny scope rail, an enough clearance for the scope's objective bell. Badger ordnance dmr 30mm scope rings are machined from steel barstock as serialized, matched pairs, so they are truly as close to identical as technologically possible, unlike mass-produced rings. The benefit of matched rings is far lower risk of damage to your scope caused by misaligned rings. Sold in matched pairs robust hex-head clamping nuts torx-head ring cap screws mfg: badger ordnance. US specification & reliable quality gun scope rings by Badger. Part Nr: 30628.
 Indicative Price: USD 189.99
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more high specification gun & shooting items : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Ruger 1" Scope Ring 30mm Scope Ring 6b30 X High Blue US Specifications
USD 34.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: High-quality ruger factory rings install easily and provide solid, zero-movement scope attachment to ruger rifles and handguns with integral bases, no. 1 rifles with factory base, and no. 3 rifles with special factory bases available separately. Low, medium, high, and extra-high heights in blued carbon steel, natural stainless steel, or stainless with ruger's proprietary matte target grey finish. Sold as single rings. Mfg: ruger specs: carbon steel, polished blue finish (bl), stainless steel, natural (ss), or target grey (tg) finish. Ring heights measured from top of base to bottom of scope tube. Low, .325". Medium (med.), .435". High, .565". Extra-high (x-high), .680". Offset ring availa. US specification & reliable quality gun scope rings by Ruger. Part Nr: 90275.
More Details : click here
SEARCH this site : click here
|
|
|
Leupold Standard Rings 30mm Medium Gloss Standard Rings US Specifications
USD 37.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Classic steel, holds scope tightly. Fits leupold std, one- and two-piece bases, plus bases from burris, millett and redfield. Mfg: leupold specs: steel 1" (2.5cm), 26mm (1.02") or 30mm (1.18") i.D. Gloss, polished blue. Matte, matte blue. Silver, satin nickel. Height measurements are from top of base to center of ring: 1", 26mm and 30mm: super low, .550" (13.9mm). Low, .650" (16.5mm). Medium, .770" (19.55mm). High, .900" (22. US specification & reliable quality gun scope rings by Leupold. Part Nr: 49960.
More Details : click here
SEARCH this site : click here
|
|
|
Nikon A Series Aluminum Rings A Series Rings 30mm Med Matte US Specifications
USD 21.95
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Engineered specifically for lighter-weight rifles, the lightweight and economical a-series rings are designed for an incredible strength-to-weight ratio. The a-series rings incorporate an integral steel recoil bolt in both the fron and rear rings. This ensures a positive recoil surface across the entire slot of the base that is capable of withstanding heavy recoil. Strong, lightweight aluminum alloy construction with matte black finish fits all a-series/weaver/warne/picatinny style bases (except a-series rimfire) a-series rimfire 3/8" & 11mm base rails mfg: nikon. US specification & reliable quality gun scope rings by Nikon. Part Nr: 16179.
More Details : click here
SEARCH this site : click here
|
|
|
Leupold Standard Rings 1" Medium Matte Standard Rings US Specifications
USD 25.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Classic steel, holds scope tightly. Fits leupold std, one- and two-piece bases, plus bases from burris, millett and redfield. Mfg: leupold specs: steel 1" (2.5cm), 26mm (1.02") or 30mm (1.18") i.D. Gloss, polished blue. Matte, matte blue. Silver, satin nickel. Height measurements are from top of base to center of ring: 1", 26mm and 30mm: super low, .550" (13.9mm). Low, .650" (16.5mm). Medium, .770" (19.55mm). High, .900" (22. US specification & reliable quality gun scope rings by Leupold. Part Nr: 49901.
More Details : click here
SEARCH this site : click here
|
|
|
Warne Mfg. Company Maxima Tactical Rings 1 Inch Ultra High Matte US Specifications
USD 103.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Picatinny tactical rings and bases, precision-machined from steel for maximum strength and reliability. Rugged, 1" and 30mm tactical rings feature a robust, stainless steel crosslug that will not swage, peen or deform under heavy recoil. Ensures consistent return-to-zero for optics that are removed and re-attached. Three, torx-style fasteners secure the vertically split ring halves at the top to prevent scope shift. Large, clamping nut at bottom provides exceptional holding power. One-piece, tactical bases are made from solid bar stock of cold drawn alloy steel, stress relieved for extra strength and uniformity. Available for standard elevation adjustment or with 20 moa forward angle fo mfg: warne mfg. Company specs: rings: steel, matte black, powder coat finish. Medium, .375" (9.5mm) high. High, .525" (13.3mm) high. Extra-high, .650" (16.5mm) high. Ultra-high, .935" (23.7mm) high. Bases: 12l14 carbon steel, powder coated, matte black. Available in standard or 20 moa. Savage bases. US specification & reliable quality gun scope rings by Warne. Part Nr: 604M.
More Details : click here
SEARCH this site : click here
|
|
|
Leupold Standard Rings 1" Medium Silver Standard Rings US Specifications
USD 33.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Classic steel, holds scope tightly. Fits leupold std, one- and two-piece bases, plus bases from burris, millett and redfield. Mfg: leupold specs: steel 1" (2.5cm), 26mm (1.02") or 30mm (1.18") i.D. Gloss, polished blue. Matte, matte blue. Silver, satin nickel. Height measurements are from top of base to center of ring: 1", 26mm and 30mm: super low, .550" (13.9mm). Low, .650" (16.5mm). Medium, .770" (19.55mm). High, .900" (22. US specification & reliable quality gun scope rings by Leupold. Part Nr: 49902.
More Details : click here
SEARCH this site : click here
|
|
|
Weaver Sure Grip Rings 1" High Gloss Rings US Specifications
USD 29.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Steel caps with two screws per side provide extra strong, 4-screw, clamping power. Helps ensure that reticle stays square while tightening top screws. Large clamp nut locks rings to base, provides easy scope installation, removal; and accurate return to zero after re-installation. Mfg: weaver specs: aluminum lower; steel cap, screws, crossbolt and nut. Black, gloss or matte finish. Heights (above base): 1 (2.5cm) diameter, med., .164" (4.16mm); high, .332" (8.43mm); x-high, .560" (14.2mm). US specification & reliable quality gun scope rings by Weaver. Part Nr: 49161.
More Details : click here
SEARCH this site : click here
|
|
|
Warne Mfg. Company Maxima Grooved Receiver Line Quick Detach Ruger Rings Qd Grl Ruger #1 Blackhawk Mini 14 Rings 1 Inch Med Matte US Specifications
USD 90.79
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Maxima grooved receiver line of scope mounts are designed to fill the need of mounting scopes to rifles with an integrated receiver mounting rail. Because each manufacturer has their own proprietary mounting rail design, each ring model must be machined to exacting tolerances for proper fit and function. The maxima grooved receiver line fulfills that need. The precision cnc machined warne rings provide unsurpassed strength, durability and quality, and fit a variety of rifle models including ruger #1, ruger 77, mini 14 & 30, and ruger blackhawk and redhawk. The maxima qd rings sport the unique warne indexable lever system which allows the user to remove the optics from the rifle then r mfg: warne mfg. Company specs: mim steel. Powder coat, gloss black (reg) or matte black (mat) in 1" (25.4mm) or 30mm (1.2") dia. Heights measured from top of base to inside bottom of ring. Medium: .460" (11.7mm). High: .585" (14.9mm). US specification & reliable quality gun scope rings by Warne. Part Nr: 1RLM.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Picatinny Scope Rings 30mm High (1.25") Steel Rings US Specifications
USD 99.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: These rings are precision machined to true mil-std 1913 specs to fit picatinny-type bases such as brownells modular flattop riser mount and picatinny scope bases. No special wrenches needed for installation. Underside of ring is undercut with a rounded radius that offers extra clearance for finger tightening the nut and for final tightening with a standard socket or flat-blade screwdriver. Extra-strong u.S.-size hex nuts have a deep slot that provides maximum engagement of screwdriver blade to help prevent slippage and slot damage-you can even use a u.S. Quarter in a pinch. Crossbolt has a square shank that serves as a recoil lug to solidly engage scope base when properly installed mfg: brownells specs: rings sold in pairs. Models available to fit 1" and 30mm scope bodies. Steel, 4140 billet steel, black, matte, oxide finish. Aluminum, 6061 t6 aluminum billet, hardcoat anodized black, matte. Heights measured from top of base to center of ring: low, .825" (2.1cm); med., 1&quo. US specification & reliable quality gun scope rings by Brownells. Part Nr: 080-000-740.
More Details : click here
SEARCH this site : click here
|
|
|
Nightforce Ultralight Rings 30mm Extreme 1.5" 6 Screw Ultralight Rings US Specifications
USD 184
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Designed to fit mil-std. 1913 scope bases, nightforce rings are precisely manufactured to match the machined recess of a nightforce mil-std. 1913 base, providing perfect alignment and accuracy. Nightforce rings are designed and produced in-house to exacting specifications entirely out of steel or from 7075-t6 aluminum with beta series titanium crossbolts and jaws. All nightforce rings are 100% micro-radiused and honed in pairs for perfect fit of 30mm scope tubes to prevent the possibility of the rings damaging your scope. Mfg: nightforce ring heights are measured from the top of the base to the center of the ring. US specification & reliable quality gun scope rings by Nightforce. Part Nr: A269.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Badger Ordnance 30mm Usmc Dmr Scope Rings 1.031 US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
