Bkl Tech 300 Series 30mm Scope Rings 30mm Dovetail Rings Black US Specifications
Gun Scope Rings by BKL
|
Technical data & information: Aircraft-grade aluminum scope rings feature self-adjusting clamping legs that fit 3⁄8" or european 11mm dovetail mounts found on many bolt-action rimfire rifles. Each leg moves equally as the clamping screws are tightened to keep the scope centered on the rail. Clamping screws also fit into pre-drilled holes to equally spread the legs to easily slip over oversized rails. 200 series fits 1" scopes and 300 series fits 30mm scopes. Available as a one-piece cantilever mount with a 2.4" offset, a pair of scope rings, or as a pair of one standard and one offset ring with a 1.3" offset. Ring pairs available as either single, or double top strap. Single-strap rings measure mfg: bkl technologies. US specification & reliable quality gun scope rings by BKL. Part Nr: BKL300MB.
 Indicative Price: USD 27.95
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more high specification gun & shooting items : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Tps Products Tsr W Picatinny/Weaver Scope Rings Tsr W Aluminum Rings 34mm Medium US Specifications
USD 134.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Tsr "w" series rings, precisely machined from an alloy steel billet, with tolerances held to .0002", give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to weaver-style or mil-std 1913 (picatinny) bases. Mfg: tps products, llc. Specs: alloy steel, black oxide finish to mil-c-13924 standards. 5/8" (15.8mm) wide. Height measured from top of base to center of ring. 30mm, low: .925" (23.5mm). US specification & reliable quality gun scope rings by TPS. Part Nr: 30696.
More Details : click here
SEARCH this site : click here
|
|
|
Burris Signature Zee Rings 1" High Nickel Rings US Specifications
USD 45.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: This patented ring design utilizes synthetic inserts that pivot within a steel outer ring allowing them to line up scope tube and rings without bending or stressing the scope tube. This assures no optical distortion. The rings come completely ready to go and can be used on any weaver-style base. Mfg: burris heights measured from top of the base to underside of the scope tube.1"med .270", high .420" 30mm med .205", high .330", extra high .582". US specification & reliable quality gun scope rings by Burris. Part Nr: 420532.
More Details : click here
SEARCH this site : click here
|
|
|
Nightforce Ultralight Rings 30mm Low .885" 4 Screw Ultralight Rings US Specifications
USD 165
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Designed to fit mil-std. 1913 scope bases, nightforce rings are precisely manufactured to match the machined recess of a nightforce mil-std. 1913 base, providing perfect alignment and accuracy. Nightforce rings are designed and produced in-house to exacting specifications entirely out of steel or from 7075-t6 aluminum with beta series titanium crossbolts and jaws. All nightforce rings are 100% micro-radiused and honed in pairs for perfect fit of 30mm scope tubes to prevent the possibility of the rings damaging your scope. Mfg: nightforce ring heights are measured from the top of the base to the center of the ring. US specification & reliable quality gun scope rings by Nightforce. Part Nr: A118.
More Details : click here
SEARCH this site : click here
|
|
|
Leupold Mark 4 Rings 1" Medium Matte Steel Mark 4 Rings US Specifications
USD 149.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Heavy-duty rings and bases are built to withstand extreme service without movement or loss of zero. Larger contact area between the scope/rings and base/receiver for less chance of movement. Large hex nuts on rings allow fast torquing of cross bolts for easy adjustment. Non reflective, matte finish. Mounting screws and torx head wrench included. Steel rings, cnc machined from solid 11l17 cold-rolled bar stock, then blued. Aluminum rings x"x cnc machined from 7075 t651 aluminum alloy and hardcoat anodized for maximum strength and wear resistance. Mfg: leupold specs: steel or aluminum, matte black finish rings, 1" (2.5cm) or 30mm (1.18in) inside diameter. Height from top of base to center of ring for both 1" and 30mm: med., .84" (2.1cm); high, 1.06" (2.7cm); super high, 1.4" (3.5cm). US specification & reliable quality gun scope rings by Leupold. Part Nr: 60595.
More Details : click here
SEARCH this site : click here
|
|
|
Leupold Mark 4 Rings 30mm High Matte Aluminum Rings Mark 4 US Specifications
USD 149.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Heavy-duty rings and bases are built to withstand extreme service without movement or loss of zero. Larger contact area between the scope/rings and base/receiver for less chance of movement. Large hex nuts on rings allow fast torquing of cross bolts for easy adjustment. Non reflective, matte finish. Mounting screws and torx head wrench included. Steel rings, cnc machined from solid 11l17 cold-rolled bar stock, then blued. Aluminum rings x"x cnc machined from 7075 t651 aluminum alloy and hardcoat anodized for maximum strength and wear resistance. Mfg: leupold specs: steel or aluminum, matte black finish rings, 1" (2.5cm) or 30mm (1.18in) inside diameter. Height from top of base to center of ring for both 1" and 30mm: med., .84" (2.1cm); high, 1.06" (2.7cm); super high, 1.4" (3.5cm). US specification & reliable quality gun scope rings by Leupold. Part Nr: 57291.
More Details : click here
SEARCH this site : click here
|
|
|
Weaver Windage Adjustable Grand Slam Rings X High 1" Matte Blue US Specifications
USD 32.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Strong, all-steel rings clamp securely to weaver-style rails and two torx screws hold your scope rigidly in place. Windage adjustable ring bases allow for increased left to right positioning on front and rear alignment of rings and scopes while leaving the windage adjustment on the scope for accurate fine-tuning at the range. Rings also allow for perfect return to zero when remounting scopes. Mfg: weaver specs: steel. Black, matte finish. 1" (2.5cm) diameter. Heights measured from top of base to bottom of ring. Med., .180" (.5cm); high, .350" (.8cm); x-high, .575" (1.5cm). Torx wrench included. US specification & reliable quality gun scope rings by Weaver. Part Nr: 49320.
More Details : click here
SEARCH this site : click here
|
|
|
Warne Mfg. Company Maxima Tactical Rings 1 Inch Extra High Matte US Specifications
USD 103.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Picatinny tactical rings and bases, precision-machined from steel for maximum strength and reliability. Rugged, 1" and 30mm tactical rings feature a robust, stainless steel crosslug that will not swage, peen or deform under heavy recoil. Ensures consistent return-to-zero for optics that are removed and re-attached. Three, torx-style fasteners secure the vertically split ring halves at the top to prevent scope shift. Large, clamping nut at bottom provides exceptional holding power. One-piece, tactical bases are made from solid bar stock of cold drawn alloy steel, stress relieved for extra strength and uniformity. Available for standard elevation adjustment or with 20 moa forward angle fo mfg: warne mfg. Company specs: rings: steel, matte black, powder coat finish. Medium, .375" (9.5mm) high. High, .525" (13.3mm) high. Extra-high, .650" (16.5mm) high. Ultra-high, .935" (23.7mm) high. Bases: 12l14 carbon steel, powder coated, matte black. Available in standard or 20 moa. Savage bases. US specification & reliable quality gun scope rings by Warne. Part Nr: 603M.
More Details : click here
SEARCH this site : click here
|
|
|
Badger Ordnance 34mm Tactical Rings 34mm Medium High Steel Rings US Specifications
USD 189.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Precision-machined, tactical ring sets provide strong, rigid mounting to securely hold large diameter, 34mm scope tubes, like schmidt & bender, on hard-recoiling guns. Robust, hex clamping nuts and weaver-style clamps lock rings tightly on weaver and picatinny mounts. Ring cap is secured with torx screws. Each set is serial-numbered to guarantee a precision-matched pair. Available in 1", 1.125 and 1.275" ring heights, steel or aluminum depending on model. Mfg: badger ordnance specs: 1" & 1.125" steel, matte black oxide finish. 1.275", max-alloy aluminum, black, matte, anodized finish. Ring heights measured from top of base to inside center of rings. Available in 1" (25.4mm), 1.25" (2.9cm) and 1.275" (31.9cm) ring heights. US specification & reliable quality gun scope rings by Badger. Part Nr: 30661.
More Details : click here
SEARCH this site : click here
|
|
|
Burris Solid Steel Zee Rings 1 Low Gloss US Specifications
USD 27.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Burris solid steel rings not only ensure accuracy, they provide an extra measure of confidence and peace of mind. Machined from a solid block of steel to exacting tolerance, each top and bottom are matched for strength and fit. Designed to handle any rifle and any recoil from rimfires to magnum calibers. Burris offers a wide selection in 1" and 30mm. Mfg: burris measurements are from the bottom of the scope tube to the bottom of the ring: 1" low .130", med. .255", high .450". 30mm med .205", high .330". US specification & reliable quality gun scope rings by Burris. Part Nr: 420080.
More Details : click here
SEARCH this site : click here
|
|
|
Warne Mfg. Company Msr Rings Msr Tactical Nut Rings 1 Inch Matte US Specifications
USD 83.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: The msr rings are the ideal height for modern sporting rifles. These rings are precision cnc machined from aircraft grade aluminum for reduced weight. The rings are designed after warne's x-skel mount and feature a steel cross bolt for superior absorption andpositive lock for guaranteed return to zero. The msr flat top rings are available in a quick detachable wingnut version for fast removal and installation or a β½" hex nut for a more permanent solution. Both of these features allow the use of multiple optics without the loss of zero. These rings are designed to locate the reticle of the optic to be precisely the same height as factory iron sights; giving the operat mfg: warne mfg. Company. US specification & reliable quality gun scope rings by Warne. Part Nr: A430M.
More Details : click here
SEARCH this site : click here
|
|
|
Nightforce Ultralight Rings 30mm Extreme 1.5" 6 Screw Ultralight Rings US Specifications
USD 184
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Designed to fit mil-std. 1913 scope bases, nightforce rings are precisely manufactured to match the machined recess of a nightforce mil-std. 1913 base, providing perfect alignment and accuracy. Nightforce rings are designed and produced in-house to exacting specifications entirely out of steel or from 7075-t6 aluminum with beta series titanium crossbolts and jaws. All nightforce rings are 100% micro-radiused and honed in pairs for perfect fit of 30mm scope tubes to prevent the possibility of the rings damaging your scope. Mfg: nightforce ring heights are measured from the top of the base to the center of the ring. US specification & reliable quality gun scope rings by Nightforce. Part Nr: A269.
More Details : click here
SEARCH this site : click here
|
|
|
Tps Products Tsr W Picatinny/Weaver Scope Rings Tsr W Aluminum Rings 30mm X High US Specifications
USD 115.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Tsr "w" series rings, precisely machined from an alloy steel billet, with tolerances held to .0002", give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to weaver-style or mil-std 1913 (picatinny) bases. Mfg: tps products, llc. Specs: alloy steel, black oxide finish to mil-c-13924 standards. 5/8" (15.8mm) wide. Height measured from top of base to center of ring. 30mm, low: .925" (23.5mm). US specification & reliable quality gun scope rings by TPS. Part Nr: 30683.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Bkl Tech 300 Series 30mm Scope Rings 30mm Dovetail Rings Black US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
