Brownells 1911 Auto Hss Lo Mount Sight Base Cutter US Specifications
Gunsmith Power Milling Cutters by Brownells
|
Technical data & information: These cutters are specially designed by us and made to our specifications for cutting the sight base slot required to mount the wichita and novak lo-mount 1911 auto sights. Use " carbide end mill to remove the bulk of the material (see drawing above) then make final dovetail cut. Final cut to lower rear of slide is done with an end mill and is not a part of the sight base cut. Made slightly undersized to compensate for variations in sight bases and milling tolerances on installation. With the popularity of custom 1911 auto pistols, this cutter is one that you will use frequently in your custom work. Caution: for use in milling machine only. 2" (5cm). .495" diameter cut mfg: brownells. US specification & reliable quality gunsmith power milling cutters by Brownells. Part Nr: 080-621-495.
 Indicative Price: USD 49.99
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more high specification gun & shooting items : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Brownells Solid Carbide Center Cut End Mill Cutters 3/8" End Mill US Specifications
USD 53.99
(Indicative price - actual current price possibly lower)
Gunsmith Power Milling Cutters US Specifications
Technical data & information: Center-cut, four-flute design cuts on the side and bottom to save machine time and money; you can make plunge cuts without pre-drilling. All are right-hand helix for right-hand turning equipment. Premium, high feed rate carbide cuts quickly and cleanly in even tough, hardened steels. Mfg: brownells specs: shank dia. Is same as cut dia. Overall lengths from 2β½" (6.35cm) to 3" (7.62mm). ß?" (6.35mm) dia. X .750" (19mm) long ‑cut. 5/16" (7.9mm) dia. X .812" (20.6mm) long cut. 3/8" (9.5mm) dia. X .875" (22.2mm) long cut. 7/16" (11.1mm) dia. X 1" (25.4mm) long c. US specification & reliable quality gunsmith power milling cutters by Brownells. Part Nr: 11137500.
More Details : click here
SEARCH this site : click here
|
|
|
Evolution Armory Solid Carbide Staggered Tooth Key Set Cutter Solid Carbide Staggerd Tooth Cutter .500"x .108" US Specifications
USD 191.99
(Indicative price - actual current price possibly lower)
Gunsmith Power Milling Cutters US Specifications
Technical data & information: This 8 flute staggered tooth carbide keyseat cutter is ideal for cutting rail slots on an 80% 1911 frame or for cutting hard welded frame rails on that custom 1911 project. Standard keyseat cutters only cut on the front face which can overheat the tool and cause it to dull much faster. This tool cuts on all 3 sides with 4 bottom facing teeth and 4 top facing teeth. All teeth cut on the face. This tool will last longer and cleaner than a standard keyseat cutter. This tool should only be used on a milling machine. It is not recommended for use with a drill press. This tool can also be used to true inner slide rails. If you touch off on this tool to set zero, make sure you touch off on the c mfg: evolution armory. US specification & reliable quality gunsmith power milling cutters by Evolution. Part Nr: DG6134.
More Details : click here
SEARCH this site : click here
|
|
|
Evolution Armory 40 Lpi Flat Top Serration Cutter US Specifications
USD 309.99
(Indicative price - actual current price possibly lower)
Gunsmith Power Milling Cutters US Specifications
Technical data & information: When it comes to customizing a handgun, putting fine serrations on the top of the slide ranks as one of those finer touches that mark a well-made custom gun. The evolution armory 40 lpi flat top serration cutter ensures that gunsmiths and hobbyists can easily put flawless serrations on any slide with a bit of machining. The evolution armory 40 lpi flat top serration cutter engraves 11 separate lines of serrations onto any slide top, once users mill a flat base that measures about .280-.300 of an inch wide as a foundation for the serrations. Cutter is made using solid carbide five-flute design 0.025-inch tooth spacing 1/2-inch shank size the evolution a mfg: evolution armory. US specification & reliable quality gunsmith power milling cutters by Evolution. Part Nr: DG5891.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Cryo Treated Dovetail Cutter 65Β° X .330" US Specifications
USD 41.99
(Indicative price - actual current price possibly lower)
Gunsmith Power Milling Cutters US Specifications
Technical data & information: We've taken our most popular dovetail cutters and cryogenically treated them to give you a tool that will cut the toughest material and last longer, saving down-time and increasing your production. Our cryo-treated tools have been deep-treated to -320β°f to change the molecular structure of the metal alloy, making them denser and removing the stresses that lead to tool fatigue. Cryo-treated tools do not look different than untreated tools, so we've added two rings near the working end to differentiate them from our regular cutters. Do not exceed 700 rpm or cutters will break. Mfg: brownells specs: cryo-treated, high-speed steel. US specification & reliable quality gunsmith power milling cutters by Brownells. Part Nr: 080-000-275.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Solid Carbide Center Cut End Mill Cutters 5/16" End Mill US Specifications
USD 51.99
(Indicative price - actual current price possibly lower)
Gunsmith Power Milling Cutters US Specifications
Technical data & information: Center-cut, four-flute design cuts on the side and bottom to save machine time and money; you can make plunge cuts without pre-drilling. All are right-hand helix for right-hand turning equipment. Premium, high feed rate carbide cuts quickly and cleanly in even tough, hardened steels. Mfg: brownells specs: shank dia. Is same as cut dia. Overall lengths from 2β½" (6.35cm) to 3" (7.62mm). ß?" (6.35mm) dia. X .750" (19mm) long ‑cut. 5/16" (7.9mm) dia. X .812" (20.6mm) long cut. 3/8" (9.5mm) dia. X .875" (22.2mm) long cut. 7/16" (11.1mm) dia. X 1" (25.4mm) long c. US specification & reliable quality gunsmith power milling cutters by Brownells. Part Nr: 11131250.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Carbide Sight Insert Cutter US Specifications
USD 33.99
(Indicative price - actual current price possibly lower)
Gunsmith Power Milling Cutters US Specifications
Technical data & information: We've had many requests for a small dovetail cutter that would speed up the cutting of dovetails in front sight blades when installing colored inserts. The one we've had made cuts a 1⁄4" wide dovetail, just right for sight inserts, and the finished product is very precise. Since the cutter is small, (it tapers to a diameter of .110"), you must make an initial cut with a 1⁄8" end mill (listed below). By using the end mill to remove some metal first, you'll avoid overloading the cutter and breaking it. Caution: for use in milling machine only. Solid carbide 2" (5cm) long. 1/4" (6.3cm) diameter shank. 60 shoulder. Mfg: brownells. US specification & reliable quality gunsmith power milling cutters by Brownells. Part Nr: 080-621-246.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Solid Carbide Center Cut End Mill Cutters 1/4" End Mill US Specifications
USD 38.99
(Indicative price - actual current price possibly lower)
Gunsmith Power Milling Cutters US Specifications
Technical data & information: Center-cut, four-flute design cuts on the side and bottom to save machine time and money; you can make plunge cuts without pre-drilling. All are right-hand helix for right-hand turning equipment. Premium, high feed rate carbide cuts quickly and cleanly in even tough, hardened steels. Mfg: brownells specs: shank dia. Is same as cut dia. Overall lengths from 2β½" (6.35cm) to 3" (7.62mm). ß?" (6.35mm) dia. X .750" (19mm) long ‑cut. 5/16" (7.9mm) dia. X .812" (20.6mm) long cut. 3/8" (9.5mm) dia. X .875" (22.2mm) long cut. 7/16" (11.1mm) dia. X 1" (25.4mm) long c. US specification & reliable quality gunsmith power milling cutters by Brownells. Part Nr: 11125000.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Brownells 1911 Auto Hss Lo Mount Sight Base Cutter US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
