Brownells 45Β° Chamfer Cutters 45Β° .17 Cal 1/2" Chamfer Cutter Only US Specifications
Gunsmith Barrel Chamfering Cutters by Brownells
Technical data & information: A damaged or poorly-cut muzzle can really hurt accuracy; sharp edges on revolver cylinder chamber mouths can cause rounds to hang up going into the cylinder, a real problem when using speedloaders. Cure both problems with this cutter. Mfg: brownells specs: cutter, 3-1/4" (8.25cm) long (except .17 caliber cutter, 2-3/8" (6cm) long). 1/2" (12.7mm) or 5/8" (15.8mm) diameter. US specification & reliable quality gunsmith barrel chamfering cutters by Brownells. Part Nr: 080-588-453.
Indicative Price: USD 62.99
(for Actual Current Price, possibly lower, please click below)
USD 95.99
(Indicative price - actual current price possibly lower) Gunsmith Barrel Chamfering Cutters US Specifications
Technical data & information: A ready-to-use combination of twelve-flute cutter and brass pilot for touching up those minor rifle muzzle imperfections that can destroy fine accuracy. Twelve flutes cut smooth and chatter free so no stoning, lapping or touch up is required. Hardened brass pilots won't scar or damage delicate rifling. A very handy tool to take along to the range or keep in your tool box, "just in case". Mfg: brownells specs: cutter, tool steel, 3" (8.2cm) long. Handle, aluminum 3" (8.8cm) long. Pilot, brass, 1" (3cm) long. One caliber set includes cutter, pilot and handle. US specification & reliable quality gunsmith barrel chamfering cutters by Brownells. Part Nr: 080-930-223.
USD 59.99
(Indicative price - actual current price possibly lower) Gunsmith Barrel Chamfering Cutters US Specifications
Technical data & information: A damaged or poorly-cut muzzle can really hurt accuracy; sharp edges on revolver cylinder chamber mouths can cause rounds to hang up going into the cylinder, a real problem when using speedloaders. Cure both problems with this cutter. Mfg: brownells specs: cutter, 3-1/4" (8.25cm) long (except .17 caliber cutter, 2-3/8" (6cm) long). 1/2" (12.7mm) or 5/8" (15.8mm) diameter. US specification & reliable quality gunsmith barrel chamfering cutters by Brownells. Part Nr: 080-588-625.
USD 58.99
(Indicative price - actual current price possibly lower) Gunsmith Barrel Chamfering Cutters US Specifications
Technical data & information: A damaged or poorly-cut muzzle can really hurt accuracy; sharp edges on revolver cylinder chamber mouths can cause rounds to hang up going into the cylinder, a real problem when using speedloaders. Cure both problems with this cutter. Mfg: brownells specs: cutter, 3-1/4" (8.25cm) long (except .17 caliber cutter, 2-3/8" (6cm) long). 1/2" (12.7mm) or 5/8" (15.8mm) diameter. US specification & reliable quality gunsmith barrel chamfering cutters by Brownells. Part Nr: 080-588-454.
USD 59.99
(Indicative price - actual current price possibly lower) Gunsmith Barrel Chamfering Cutters US Specifications
Technical data & information: A ready-to-use combination of twelve-flute cutter and brass pilot for touching up those minor rifle muzzle imperfections that can destroy fine accuracy. Twelve flutes cut smooth and chatter free so no stoning, lapping or touch up is required. Hardened brass pilots won't scar or damage delicate rifling. A very handy tool to take along to the range or keep in your tool box, "just in case". Mfg: brownells specs: cutter, tool steel, 3" (8.2cm) long. Handle, aluminum 3" (8.8cm) long. Pilot, brass, 1" (3cm) long. One caliber set includes cutter, pilot and handle. US specification & reliable quality gunsmith barrel chamfering cutters by Brownells. Part Nr: 080-588-625.
USD 64.99
(Indicative price - actual current price possibly lower) Gunsmith Barrel Chamfering Cutters US Specifications
Technical data & information: High-speed steel chamfer cutter makes perfect 45β° angle cuts for easier cylinder filling with speed loaders. Tin coating on the cutting surface allows for smooth, chatter-free cuts and longer cutting life even on tough metals such as scandium. Also great for chamfering the muzzle on chrome-lined barrels. Available in 5/8" size. Mfg: brownells specs: high-speed steel, tin coating on cutting surface. Overall length: 2.4" (61mm). Fits brownells muzzle and cylinder facing and chamfering tool handle and pilots. US specification & reliable quality gunsmith barrel chamfering cutters by Brownells. Part Nr: 080-588-626.
