Brownells Aluminum Oxide Abrasive Blasting Grit 6 Lbs. (2.7kg) Fine 240 Grit US Specifications
Gunsmith Pre-Finish Surface Prep by Brownells
|
Technical data & information: By using controlled, abrasive blasting with these extremely fine, aluminum-oxide grits, you can "color", "texture" or "tone" any metal surface to produce the desired cosmetic effect without washing out detail. Professional instructions included. Mfg: brownells specs: 6 lbs. In screw-top, plastic jar. 15 lbs. In snap-top pail. US specification & reliable quality gunsmith pre-finish surface prep by Brownells. Part Nr: 084-206-240.
 Indicative Price: USD 25.99
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more high specification gun & shooting items : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Brownells Rust And Blue Remover 1 Quart US Specifications
USD 39.99
(Indicative price - actual current price possibly lower)
Gunsmith Pre-Finish Surface Prep US Specifications
Technical data & information: There are many times when the use of a good rust remover is called for during the bluing operation, old time guns too fragile to polish, guns that have been badly neglected and are not worth spending enough money on to warrant a good polishing job, and guns so badly rusted it would take too much valuable time trying to buff off all the rust and crud on the metal. Our rust remover comes in concentrated form. One quart is mixed with one quart of pure water to make two quarts of operating rust remover. The remover is made so it will not attack anything but rusted steel, not the live steel itself, providing immersion is not unreasonably long, several hours, that is. Rust mfg: brownells specs: available in 1 quart (946ml) or 1 gallon (3.8l). 1 quart makes 2 quarts solution, 1 gallon makes 2 gallons of solution. US specification & reliable quality gunsmith pre-finish surface prep by Brownells. Part Nr: 082-054-032.
More Details : click here
SEARCH this site : click here
|
|
|
Kg Products K Phos Pre Treatment K Phos 16 Oz. US Specifications
USD 57.99
(Indicative price - actual current price possibly lower)
Gunsmith Pre-Finish Surface Prep US Specifications
Technical data & information: Advanced phosphate liquid replaces the hot tank phosphating process to provide protection against rust and corrosion, plus a superior crystalline bonding surface for brownells gun-kote finishes. K-phos chemically etches and instantly seals the metal surface to prevent rust prior to painting. Application requires surfaces to be completely degreased using brownells tce or kg3 solvent degreaser. Machined surfaces can be abrasive blasted for maximum adhesion. Easy application: brush on, dip the parts, or spray on with air brush. Does not require thinning, and dries in 10 to 15 minutes for fast turn-around. Highly recommended for use with gun-kote on alloy steel, stainless steel, aluminum, and so mfg: kg products specs: liquid, clear. 8 fl. Oz. (237 ml) or 16 fl. Oz. (473 ml) plastic bottle. US specification & reliable quality gunsmith pre-finish surface prep by KG. Part Nr: 665-000-014.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Tce Cleaner Degreaser Quart Tce US Specifications
USD 26.99
(Indicative price - actual current price possibly lower)
Gunsmith Pre-Finish Surface Prep US Specifications
Technical data & information: Tce cuts through almost all greases, waxes and gunk, yet because it is completely volatile, does not leave any residue on the cleaned part. We have found tce to be the very best way to get gunk off prior to bluing, plating or browning. Makes an excellent closed-can soak for really gunked-up parts. The least harmful of the chlorinated solvents still generally available. (this isn't a license to be careless; follow the label directions exactly!) must be used with adequate ventilation; gloves and eye protection are recommended. Keep away from heat and open flame. Mfg: brownells specs: quart (32 fl. Oz./946 ml) or gallon (128 fl. Oz./3.8 l). US specification & reliable quality gunsmith pre-finish surface prep by Brownells. Part Nr: 083-060-032.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Super Strip 10 Lb. Super Strip US Specifications
USD 84.99
(Indicative price - actual current price possibly lower)
Gunsmith Pre-Finish Surface Prep US Specifications
Technical data & information: Steel-safe, powder mixes to a potent stripping solution that quickly breaks down and removes electrolytic nickel, copper, chrome, zinc, cadmium, and electroless nickel plating with no fumes, rusting or damage to the parent metal. Chemical activation stops after all the plating is removed. Use only on steel; other metals may be damaged or destroyed- see instructions. Requires a 6-volt, 90-110 amp, deep cycle (gc-1) battery. Mfg: brownells specs: 10 lb. (4.5 kg) pail. Makes 2 gal. (256 fl. Oz./7.6 l) of solution with enough left for one, 2 gallon rejuvenation. US specification & reliable quality gunsmith pre-finish surface prep by Brownells. Part Nr: 082-066-010.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Steel White 1 Quart US Specifications
USD 43.99
(Indicative price - actual current price possibly lower)
Gunsmith Pre-Finish Surface Prep US Specifications
Technical data & information: Effectively removes heavy rust, scale and bluing without damaging your expensive firearms or parts, because it attacks the rust, not the base metal. Works great on both steel and cast iron without dangerous fumes; does not cause hydrogen embrittlement. Ph neutral solution won't eat your clothing or bench. Does not attack softer metals like brass, copper, zinc or aluminum so there's no need to remove inlays, sight beads or solder-on ribs before immersion. Highly concentrated liquid really saves money. One gallon of brownells steel white can be diluted with water to make up to 20 gallons of safe, economical, rust and blue removing solution. Removes light rust and bluing in mfg: brownells specs: available in quart (946ml) and gallon (3.8l). Ph neutral liquid. US specification & reliable quality gunsmith pre-finish surface prep by Brownells. Part Nr: 082-055-032.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Rust Release 1 Gal. US Specifications
USD 29.99
(Indicative price - actual current price possibly lower)
Gunsmith Pre-Finish Surface Prep US Specifications
Technical data & information: Powerful, rust stripper removes corrosion from steel and other ferrous metals. Gets rid of flash rust in as little as 15 minutes, cleans heavily rusted steel overnight. Environmentally safe formula attacks the rust but won't hurt the metal underneath, so it's great for restorations where bead-blasting and repolishing are undesirable. Penetrates dirt and oil, eliminating need for pre-cleaning on most jobs. Safer than traditional acid "pickling" processes. Non-flammable, acid-free, and biodegradable with low toxicity and minimal odor. Easy, one-step process doesn't require multiple baths or rinses. Use full-strength straight from container, no messy diluting, mixing, or measuring. Re-usable mfg: brownells specs: 1 gal. (128 fl. Oz./3.8 liters) plastic jug. US specification & reliable quality gunsmith pre-finish surface prep by Brownells. Part Nr: 082-000-013.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Glass Beads #60 100 Glass Beads US Specifications
USD 84.99
(Indicative price - actual current price possibly lower)
Gunsmith Pre-Finish Surface Prep US Specifications
Technical data & information: Glass beads are used to make the matte finish that is so highly sought after. Fast to do; easy to get results wanted. Must be done in enclosed blast cabinet. Used by many custom rifle and pistol builders. Finish can be blued, plated, or left in-the-white. Mfg: brownells specs: two sizes. U.S. Sieve size #60-100 (.0098-.0059") for deep matte coverage; field or utility guns. #270 (.0021-.0005") for softer, matte look matching stainless steel finishes. 50 lb. Of beads in sealed pail, shipped by ups. US specification & reliable quality gunsmith pre-finish surface prep by Brownells. Part Nr: 084-063-100.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Steel White 1 Gallon US Specifications
USD 156.99
(Indicative price - actual current price possibly lower)
Gunsmith Pre-Finish Surface Prep US Specifications
Technical data & information: Effectively removes heavy rust, scale and bluing without damaging your expensive firearms or parts, because it attacks the rust, not the base metal. Works great on both steel and cast iron without dangerous fumes; does not cause hydrogen embrittlement. Ph neutral solution won't eat your clothing or bench. Does not attack softer metals like brass, copper, zinc or aluminum so there's no need to remove inlays, sight beads or solder-on ribs before immersion. Highly concentrated liquid really saves money. One gallon of brownells steel white can be diluted with water to make up to 20 gallons of safe, economical, rust and blue removing solution. Removes light rust and bluing in mfg: brownells specs: available in quart (946ml) and gallon (3.8l). Ph neutral liquid. US specification & reliable quality gunsmith pre-finish surface prep by Brownells. Part Nr: 082-055-128.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells D'solve Pump Spray 4oz US Specifications
USD 12.99
(Indicative price - actual current price possibly lower)
Gunsmith Pre-Finish Surface Prep US Specifications
Technical data & information: The brownells d'solve pump spray gun cleaner is designed to offer gun owners a ready-to-use solution that can clean off dirt, fouling, oil and other residue with ease. The brownells d'solve pump spray gun cleaner is available in a compact size that can be easily taken to the range, ensuring that you have the cleaning solvent you need to keep your gun running right. 4-ounce bottle equipped with spray-pump applicator odor-free the brownells d'solve pump spray gun cleaner works better than other solvents that easily damage more delicate parts, allowing users to clean wooden gun stocks and checkering. Mfg: brownells. US specification & reliable quality gunsmith pre-finish surface prep by Brownells. Part Nr: 082-000-018.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Brownells Aluminum Oxide Abrasive Blasting Grit 6 Lbs. (2.7kg) Fine 240 Grit US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
