Brownells Ar 15 Gas Block Kit Modular Ar 15 Gas Block US Specifications
Rifle Gas System Blocks by Brownells
|
Technical data & information: Easy-to-install gas block features an integral fixed rail and a modular design that allows fast installation and removal of up to three, additional picatinny rails for mounting lasers, lights, night vision optics, back-up sights, and a variety of other tactical accessories. Side and bottom rails attach easily with two screws, so you can configure the unit for each mission's requirements. Precision-machined from rugged, 6061 billet aluminum for superior strength without weighing down your weapon. Mounts securely to barrel with three, hardened steel setscrews. Mfg: brownells specs: aluminum, matte black, hardcoat anodized finish. Fits standard .750" (19mm) dia. Barrels. Gas block, 1-7⁄8" (4.8cm) long, 1" (2.5cm) wide, 1-7⁄16" (3.6cm) high. Gas block kit includes modular gas block with three add-on rails. 1-7/8" long, 2. US specification & reliable quality rifle gas system blocks by Brownells. Part Nr: 080-000-382.
 Indicative Price: USD 33.99
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more high specification gun & shooting items : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Superlative Arms Ar 15 Adjustable Gas Block .875" Clamp On Melonite US Specifications
USD 89.99
(Indicative price - actual current price possibly lower)
Rifle Gas System Blocks US Specifications
Technical data & information: He superlative arms patented "bleed off", direct impingement, gas block for the ar15 platform adjusts the gas flow by bleeding the gas out of the block instead of restricting the flow like conventional adjustable blocks. Results: the pressure used in the block is reduced only to the amount required to drive the bolt carrier. The remaining gas / pressure are bled out of the block allowing the system to run much cleaner and cooler. Reduction of felt recoil. Patented adjustment detent is located outside of the block and therefore no contamination. The gas adjustment screw does not restrict the gas flow; therefore there is no erosion or seizin mfg: superlative arms llc. US specification & reliable quality rifle gas system blocks by Superlative. Part Nr: SABODI875CM.
More Details : click here
SEARCH this site : click here
|
|
|
Faxon Firearms Ar 15 Low Profile Gas Blocks 3 Screw .625 US Specifications
USD 35.99
(Indicative price - actual current price possibly lower)
Rifle Gas System Blocks US Specifications
Technical data & information: Perfect for any rail system, these ultra-low profile gas blocks are the ideal companion for faxon firearms (or any other) barrels with a standard diameter gas journal. Made from high-strength steel, all faxon gas blocks are a matching black luster to their barrels. For lightweight builds, the block is drilled through the middle of the profile. The gas block clamps on to the barrel using 3 allen keys on the bottom of the block. Faxon firearms highly recommends the use of loc-tite or similar thread-locking compounds. Gas blocks will get very hot, so pick a compound according to your intended use of the firearm. Mfg: faxon firearms. US specification & reliable quality rifle gas system blocks by Faxon. Part Nr: GBLP6253.
More Details : click here
SEARCH this site : click here
|
|
|
Superlative Arms Ar 15 Adjustable Gas Block .875" Clamp On Ss US Specifications
USD 89.99
(Indicative price - actual current price possibly lower)
Rifle Gas System Blocks US Specifications
Technical data & information: He superlative arms patented "bleed off", direct impingement, gas block for the ar15 platform adjusts the gas flow by bleeding the gas out of the block instead of restricting the flow like conventional adjustable blocks. Results: the pressure used in the block is reduced only to the amount required to drive the bolt carrier. The remaining gas / pressure are bled out of the block allowing the system to run much cleaner and cooler. Reduction of felt recoil. Patented adjustment detent is located outside of the block and therefore no contamination. The gas adjustment screw does not restrict the gas flow; therefore there is no erosion or seizin mfg: superlative arms llc. US specification & reliable quality rifle gas system blocks by Superlative. Part Nr: SABODI875CS.
More Details : click here
SEARCH this site : click here
|
|
|
Yankee Hill Machine Co. Ar 15 Gas Block Picatinny Ar 15 Gas Block 2 Rail Picatinny .750 Steel Black US Specifications
USD 64.99
(Indicative price - actual current price possibly lower)
Rifle Gas System Blocks US Specifications
Technical data & information: Unique, all-steel gas blocks expand the versatility of your rifle by providing a variety of accessory rail and handguard mounting options. Especially helpful in customizing short-barrelled tactical rifles. Machined from bar stock for extra strength and rigidity, then mil-spec parkerized for exceptional wear- and corrosion-resistance. One-piece, 4-rail model features top/bottom and side rails that accept weaver or picatinny mounted, tactical accessories, including the yankee hill gas block front flip sight. Secures to barrel with included setscrews. 2-rail gas block is an easy-to-install, two-piece unit that clamps around the barrel using four hex screws; includes machined top and bottom p mfg: yankee hill machine co., inc. Specs: steel, mil-spec phosphate finish. Unless otherwise noted, fits .750" diameter barrels. 4-rail, 1-7⁄8" (4.8cm) long, 1-1⁄4" (3.2cm) wide, 1-3⁄4" (4.4cm) high. 5.7 oz. (162 g) wt. 2-rail, 1-3⁄4" long, 1-1⁄4" wide, 1-3⁄4". US specification & reliable quality rifle gas system blocks by Yankee Hill. Part Nr: YHM9390A.
More Details : click here
SEARCH this site : click here
|
|
|
Faxon Firearms Ar 15 Low Profile Gas Blocks 3 Screw .750 US Specifications
USD 29.99
(Indicative price - actual current price possibly lower)
Rifle Gas System Blocks US Specifications
Technical data & information: Perfect for any rail system, these ultra-low profile gas blocks are the ideal companion for faxon firearms (or any other) barrels with a standard diameter gas journal. Made from high-strength steel, all faxon gas blocks are a matching black luster to their barrels. For lightweight builds, the block is drilled through the middle of the profile. The gas block clamps on to the barrel using 3 allen keys on the bottom of the block. Faxon firearms highly recommends the use of loc-tite or similar thread-locking compounds. Gas blocks will get very hot, so pick a compound according to your intended use of the firearm. Mfg: faxon firearms. US specification & reliable quality rifle gas system blocks by Faxon. Part Nr: GBLP7503.
More Details : click here
SEARCH this site : click here
|
|
|
J P Enterprises Ar 15/M16 Adjustable Gas Blocks Low Profile Adjustable Gas Black .750" Bore Black Ss US Specifications
USD 75.99
(Indicative price - actual current price possibly lower)
Rifle Gas System Blocks US Specifications
Technical data & information: Replaces the factory front sight/gas block and allows you to tune the gas system for smoother cycling and operation. Especially critical on match and varmint rifles when shooting both factory and custom-loaded ammunition. Simple setscrew lets you control the gas flow, so you can customize the setting for each load. Hex head setscrews clamp the block securely to the barrel. Installation instructions included. Standard model features a topside picatinny rail for mounting flip-up front sights and other accessories. Available in lightweight aluminum or stainless steel for additional muzzle weight. Fits barrels with .750" o.D. At gas block. Heavy , alum mfg: j p enterprises specs: standard, available in 6061 t6 aluminum, hardcoat anodized, matte black, or 416 stainless steel, natural silver or black oxide finish. 17/8" (4.7cm) long, .950" (2.4cm) wide. .750" (19mm) i.D. Heavy, aluminum, hard anodized, matte black. 17/8" long, 1&frac. US specification & reliable quality rifle gas system blocks by JP. Part Nr: JPGS5B.
More Details : click here
SEARCH this site : click here
|
|
|
Double Star Ar 15/M16 Accessory Rail Gas Blocks 4 Rail Standard Gas Block US Specifications
USD 64.3
(Indicative price - actual current price possibly lower)
Rifle Gas System Blocks US Specifications
Technical data & information: Lightweight gas blocks with integral mil-std 1913 picatinny rails expand your ar's accessory mounting options without adding excess weight or bulk. Lets you mount a backup iron sight, weapon light, laser sight, folding bipod, vertical grip, and other tactical accessories. Standard models fit barrels with .750" o.D. At gas port. 2-rail two-piece, clamp-on design with top and bottom rails doesn't require removal of flash hider to install or remove. Clamps securely in place with four hex-head cap screws for a rock-solid installation that won't shift under recoil. Circular cutouts in the sides reduce weight without compromising strength. 4-rail innovativ mfg: double star specs: standard 6061 t6 aluminum, hardcoat anodized. Fits barrels with .750" o.D. 2-rail matte black finish. 17/8" (4.8cm) long, 1.2" (3cm) wide, 1βύ" (4.5cm) high. 2.6 oz. (74g) weight. 4-rail satin black ptfe-impregnated finish. 17/8. US specification & reliable quality rifle gas system blocks by Double Star. Part Nr: DSC755.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Ar 15 Gas Block Kit Modular .750 Aluminum Black US Specifications
USD 54.99
(Indicative price - actual current price possibly lower)
Rifle Gas System Blocks US Specifications
Technical data & information: Easy-to-install gas block features an integral fixed rail and a modular design that allows fast installation and removal of up to three, additional picatinny rails for mounting lasers, lights, night vision optics, back-up sights, and a variety of other tactical accessories. Side and bottom rails attach easily with two screws, so you can configure the unit for each mission's requirements. Precision-machined from rugged, 6061 billet aluminum for superior strength without weighing down your weapon. Mounts securely to barrel with three, hardened steel setscrews. Mfg: brownells specs: aluminum, matte black, hardcoat anodized finish. Fits standard .750" (19mm) dia. Barrels. Gas block, 1-7⁄8" (4.8cm) long, 1" (2.5cm) wide, 1-7⁄16" (3.6cm) high. Gas block kit includes modular gas block with three add-on rails. 1-7/8" long, 2. US specification & reliable quality rifle gas system blocks by Brownells. Part Nr: 080-000-384.
More Details : click here
SEARCH this site : click here
|
|
|
Badger Ordnance Ar 15 Gas Block Mk12 .875 Ss US Specifications
USD 68.99
(Indicative price - actual current price possibly lower)
Rifle Gas System Blocks US Specifications
Technical data & information: Slim, low-profile replacement for factory front sight gas block provides maximum clearance for optics and free-float handguards. Streamlined profile reduces forward weight and improves your rifle's appearance. Set screws, gas tube mounting pin, and installation instructions included. Mk 12 is an exact copy of the gas manifold on the mk12 mod 1 and mk 18 mod 1 special purpose rifles used by the u.S. Army and navy. Made from 416 stainless steel with a tough, wear-resistant black oxide finish, and fits barrels with .750" o.D. Mk 12 style in natural stainless, has the same low profile as the mk12 mod 1 gas manifold, and fits barrels with .875" o.D. Mfg: badger ordnance specs: 416 stainless steel. Mk 12 fits .750" (19mm) o.D. Barrels. Black finish. 1" (25.4mm) long, 7⁄8" (22.2mm) wide, 1-7⁄16" (36.5cm) high. Mk 12 style fits .875" (22.2mm) o.D. Barrels. Natural silver finish. 1" (25.4mm) long, 1" wide, 1-7⁄1. US specification & reliable quality rifle gas system blocks by Badger. Part Nr: 24931.
More Details : click here
SEARCH this site : click here
|
|
|
Double Star Ar 15/M16 Picatinny Rail Gas Block .750" Picatinny Gas Block US Specifications
USD 34.99
(Indicative price - actual current price possibly lower)
Rifle Gas System Blocks US Specifications
Technical data & information: Compact gas block clamps securely to barrel with a unique three-point attachment system to provide a solid accessory mounting platform and ensure proper gas system alignment for reliable cycling. Precision machined from high-grade 6061 t6 aluminum for an ideal combination of strength and low weight, with an integral mil-std 1913 picatinny rail on the topside. Anchors to the barrel with a pair of hex-head setscrews on the underside, plus a third screw on top to ensure a superior gas seal and resist unwanted movement that can impair gas system function. Streamlined design has clean, good-looking, angular lines with all exposed edges radiused to eliminate sharpness. Mil-spec hardcoat anodized f mfg: double star specs: 6061 t6 aluminum, hardcoat anodized, matte black. All models 1.875" (cm) long. Rail heights are measured from top of barrel to top of rail. .625", 1" (2.5cm) wide, 1.5" (3.8cm) overall height, .600" (1.5cm) rail height. 3 oz. (84g) weight. .750", 1". US specification & reliable quality rifle gas system blocks by Double Star. Part Nr: 750GB.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Brownells Ar 15 Gas Block Kit Modular Ar 15 Gas Block US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
