Brownells Ar 15/M16 Upper Receiver Action Block & Lower Vise Block Set US Specifications
Rifle Bench & Vise Blocks by Brownells
|
Technical data & information: Heavy-duty blocks allow you to firmly clamp ar-15/m16 receiver halves in a vise without risk of crushing, twisting, or otherwise distorting them when applying vise pressure or torquing the barrel nut. Keeps your rifle secure for safe, effective cleaning, assembly, and repair. High pressure, solvent resistant, structural rynite block and insert surround the entire upper receiver and support it inside and out to make rebarreling the ar-15/m16 an easy, one-man job. Lets you firmly secure a mil-spec carry handle receiver or mil-spec flattop receiver in a large bench vise for barrel removal/installation. Torque generated while tightening the barrel nut is transmitted to the block and insert, n mfg: brownells specs: injection-molded rynite, black. Fits a1, a2, and standard flattop receivers. Block, 2.5" (6.3cm) thick, 3.5" (8.8cm) wide, 4.5" (11.4cm) high. Insert, 8" (20cm) long, 1" (2.5cm) diameter. Torque tested to 200 ft. Lbs. US specification & reliable quality rifle bench & vise blocks by Brownells. Part Nr: 080-000-659.
 Indicative Price: USD 59.99
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more high specification gun & shooting items : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Ergo Grips Ar 15/M16 Spike's Block Ar 15 Spike's Block US Specifications
USD 25.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks US Specifications
Technical data & information: One-piece, molded polymer stand securely supports the lower receiver for cleaning, maintenance or storage. Base has a small footprint and clamps to your workbench, while the top fits in the magwell of any ar-15 pattern rifle. Grooves in both sides of insert accept the mag catch to lock your rifle on the block. Can also be used as a wall mount for your rifle. Mfg: ergo grips specs: molded, glass-filled resin, black. 4-5/8" (11cm) long, 2" (5.1cm) wide, 6-1⁄8" (15.5cm) tall. 4.3 oz. (122g) wt. Permanent installation requires four βό" bolts or screws, not included. Assembly includes one block only. US specification & reliable quality rifle bench & vise blocks by Ergo. Part Nr: 4996.
More Details : click here
SEARCH this site : click here
|
|
|
Daguanno Customs Ar 15 Receiver Raceway Fixture Ar 15/M16 Rrf US Specifications
USD 122.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks US Specifications
Technical data & information: Unlike typical vice-block type tools, the d'aguanno custom receiver raceway fixture provides a precision fit inside the receiver raceway to accurately fit all forged and machined receivers cut to mil-spec bolt carrier dimensions. The receiver raceway fixture is designed to allow the user to use the fixture for multiple assembly operations. Use to torque the barrel nut on the receiver as well as the muzzle device to the barrel the slot in the locating pin allows the installation of the gas tube without removing the upper from the fixture. Works great for multiple task like installing the forward assist, handguards, dustcovers, optics, and other tactical acces mfg: daguanno customs. US specification & reliable quality rifle bench & vise blocks by Daguanno. Part Nr: RRF.
More Details : click here
SEARCH this site : click here
|
|
|
Ergo Grips 308 Ar morers Block US Specifications
USD 21.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks US Specifications
Technical data & information: This is one of the most useful maintenance accessories available for an ar-10. Simply bolt or clamp securely to a bench or other work surface, place an ar 308 rifle onto the block inside the magazine well, and the rifle is held in place for cleaning, maintenance, or storage. 1-piece glass filled polymer design fits rifles that use sr-25 pattern magazines weight: .7oz 6-1/8" tall x 2" long(at the base) x 4-1/4" wide (at the base) 1/4" mounting holes mfg: ergo grips. US specification & reliable quality rifle bench & vise blocks by Ergo. Part Nr: 4989.
More Details : click here
SEARCH this site : click here
|
|
|
Sinclair International Ar 15/Ar 10 Ar Vise Blocks Sinclair Ar 15 Vise Block US Specifications
USD 19.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks US Specifications
Technical data & information: The sinclair vise block is the perfect tool for securely holding your ar-15/ar-10 in a bench vise. The vise block inserts into your magazine well just like a magazine and the bottom half of the block can be clamped into a vise. You can tilt the block in the vise to work at a different angle if desired. You can also insert the vise block into the top of the lower assembly allowing you to work on the bottom side. The vise block is made of machined high density polyethylene, so it is extremely solid. Great workbench tool. Ar-10 model only fits armalite ar-10 pattern rifles, does not fit dpms/sr25 pattern rifles. Mfg: sinclair international. US specification & reliable quality rifle bench & vise blocks by Sinclair. Part Nr: 14150.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Receiver Contouring Fixture US Specifications
USD 128.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks US Specifications
Technical data & information: Provides a precise base for machining surplus military receivers. Used with brownells receiver facing mandrels, the receiver rotates around its own axis for removing pits, unwanted markings and re-contouring front rings. Lets you remove the charger guide from mausers, clean up enfield rear bridges and other custom work. Ensures that the work is square to the receiver. Mfg: brownells specs: steel, blued. 13" (33cm) long, 3" (7.6cm) wide. Use with large ring and small ring mausers, p-14 and p-17 enfields, 03 springfield, rem. 700, win m-70. Click here for receiver facing mandrels. US specification & reliable quality rifle bench & vise blocks by Brownells. Part Nr: 080-914-000.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Ar 15/M16 Lower Receiver Vise Block US Specifications
USD 49.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks US Specifications
Technical data & information: Heavy-duty blocks allow you to firmly clamp ar-15/m16 receiver halves in a vise without risk of crushing, twisting, or otherwise distorting them when applying vise pressure or torquing the barrel nut. Keeps your rifle secure for safe, effective cleaning, assembly, and repair. Unbreakable urethane vise block takes all the clamping force, so your expensive lower receiver won't be damaged or distorted. Insert block into the magazine housing from the top or bottom, then clamp the other end in your bench vise. The magazine catch locks to the block, safely and securely holding the rifle for assembly, disassembly, cleaning, or repair. Will not mar or scratch the finish. Fits tightly in mos mfg: brownells specs: high-density urethane plastic, black. 5" (12cm) high, 2βό" (5.7cm) wide, βύ" (19cm) thick. US specification & reliable quality rifle bench & vise blocks by Brownells. Part Nr: 080-000-662.
More Details : click here
SEARCH this site : click here
|
|
|
Sinclair Ar 15 Bolt Vise US Specifications
USD 18.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks US Specifications
Technical data & information: Our bolt vise helps you disassemble your ar-15 bolt easily and without losing any parts. The main function of the tool is to compress the ejector so you can remove the spring pin easily. This enables you to release the pressure on the ejector slowly so the ejector and spring don't go flying off your workbench. The ejector and spring can be replaced if needed and the bolt reassembled easily. The tool cradles the bolt and holds it firmly in place while the screw assembly compresses the ejector. A hole in the vise allows the pin to drop free. The tool can also be used to hold the bolt securely while replacing gas rings and replacing the extractor. Note: we recommend you replace the ejecto mfg: sinclair international. US specification & reliable quality rifle bench & vise blocks by Sinclair. Part Nr: 14950.
More Details : click here
SEARCH this site : click here
|
|
|
Precision Reflex Ar 15/M16 Upper Receiver Vise Block US Specifications
USD 57.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks US Specifications
Technical data & information: Heavy duty, machined aluminum vise block lets you clamp an ar-15/m16 upper receiver in a bench vise without risk of marring the finish or distorting the receiver from over-tightening. Dual-use design allows the receiver to be positioned top side up or, if it's a flattop, upside down; either way, the vise grasps the block and never touches the receiver. One side of the block fits in the underside of the receiver and is held securely in place with two, steel, t-pins inserted through the takedown pin holes, so you can install optics, perform thorough cleaning, and do other work on the exterior. Or, slide a flattop receiver rail into the grooves on the other side of the block and tighten t mfg: precision reflex, inc. Specs: body, aluminum, hardcoat anodized, matte black. 7" (17.8cm) long, 1βό" (3.2cm) wide, 1βό" high. Pins steel, black oxide finish. Fits ar-15/m16/m4 and clones with .250" diameter takedown pin holes. US specification & reliable quality rifle bench & vise blocks by Precision. Part Nr: 50083.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Ar 15/M16 Upper Receiver Action Block US Specifications
USD 59.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks US Specifications
Technical data & information: Heavy-duty blocks allow you to firmly clamp ar-15/m16 receiver halves in a vise without risk of crushing, twisting, or otherwise distorting them when applying vise pressure or torquing the barrel nut. Keeps your rifle secure for safe, effective cleaning, assembly, and repair. High pressure, solvent resistant, structural rynite block and insert surround the entire upper receiver and support it inside and out to make rebarreling the ar-15/m16 an easy, one-man job. Lets you firmly secure a mil-spec carry handle receiver or mil-spec flattop receiver in a large bench vise for barrel removal/installation. Torque generated while tightening the barrel nut is transmitted to the block and insert, n mfg: brownells specs: injection-molded rynite, black. Fits a1, a2, and standard flattop receivers. Block, 2.5" (6.3cm) thick, 3.5" (8.8cm) wide, 4.5" (11.4cm) high. Insert, 8" (20cm) long, 1" (2.5cm) diameter. Torque tested to 200 ft. Lbs. US specification & reliable quality rifle bench & vise blocks by Brownells. Part Nr: 080-000-661.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Mauser Receiver Holding Fixture Mauser Receiver Fixture US Specifications
USD 89.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks US Specifications
Technical data & information: Provides complete access to these hard-to-hold receivers, without the worry of crushing or damage. Securely holds mauser receivers and barreled actions in a bench vise, drill press or milling machine when drilling and tapping for scope bases, polishing, bolt lapping, milling or other modifications. The receiver is rigidly clamped to the fixture using a plate inside the frame rails and/or the stock mounting screws. Fits military and commercial m98 actions. Mfg: brownells specs: steel, blued. 9" (22.8cm) long, 1" (2.5cm) wide. Includes clamp plate and bolt. US specification & reliable quality rifle bench & vise blocks by Brownells. Part Nr: 080-919-000.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells 308 Ar Lower Receiver Vise Block Ar Style .308 Lower Receiver Block US Specifications
USD 45.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks US Specifications
Technical data & information: Heavy-duty vise block takes all the clamping force, so your expensive lower receiver won't get scratched, distorted, or otherwise damaged. Insert block into the mag well, just like an ordinary magazine, then clamp the other end in your bench vise. The magazine catch locks to the block, safely and securely holding the rifle for assembly, disassembly, cleaning, or repair. Double-ended design fits armalite ar-10, bushmaster .308, dpms panther lr-308, and remington r-25. Does not fit rock river arms lower receivers. Machined from rugged, durable, chemical-resistant delrin polymer; will not mar or scratch weapon's finish. Mfg: brownells specs: machined delrin, white. 5-1/8" (13cm) high, 3" (7.6cm) wide, 1" (2.5cm) thick. Fits most ar-style .308 rifles except rock river arms. US specification & reliable quality rifle bench & vise blocks by Brownells. Part Nr: 080-000-494.
More Details : click here
SEARCH this site : click here
|
|
|
Sinclair International Ar 15/Ar 10 Ar Vise Blocks Sinclair Ar 10 Vise Block US Specifications
USD 26.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks US Specifications
Technical data & information: The sinclair vise block is the perfect tool for securely holding your ar-15/ar-10 in a bench vise. The vise block inserts into your magazine well just like a magazine and the bottom half of the block can be clamped into a vise. You can tilt the block in the vise to work at a different angle if desired. You can also insert the vise block into the top of the lower assembly allowing you to work on the bottom side. The vise block is made of machined high density polyethylene, so it is extremely solid. Great workbench tool. Ar-10 model only fits armalite ar-10 pattern rifles, does not fit dpms/sr25 pattern rifles. Mfg: sinclair international. US specification & reliable quality rifle bench & vise blocks by Sinclair. Part Nr: 23150.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Brownells Ar 15/M16 Upper Receiver Action Block & Lower Vise Block Set US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
