Brownells Half Round Files Smooth Cut 8" (20.3cm) US Specifications
Gunsmith Files by Brownells
|
Technical data & information: Choice between flat and curved surfaces. Taper slightly in both width and thickness. Bastard works for wood and metal. Mfg: brownells specs: double-cut flat side, single-cut curved side. 8" (20.3cm) long, βύ" (19mm) wide, 7⁄32" (5.6mm) thick. US specification & reliable quality gunsmith files by Brownells. Part Nr: 4960.
 Indicative Price: USD 21.99
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more high specification gun & shooting items : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Brownells Metal Checkering Files 50 Lpi (#2) US Specifications
USD 53.99
(Indicative price - actual current price possibly lower)
Gunsmith Files US Specifications
Technical data & information: The only way to get true, accurate line spacing when checkering backstraps, triggerguards, grip frames, ribs and hammer spurs; anywhere an improved gripping surface is needed. Finer cuts give a nice matting effect to reduce glare and light distortion. Procedure is very similar to wood checkering. Layout your master lines (or use a guide like our .45 checkering guide), then establish the pattern by moving the file a few teeth each time using the previous lines as the guide. Once the pattern is fully laid out, bring to final depth with a 60β° needle file. Mfg: brownells specs: 8" (20.3cm) length x β½" (12.7mm) wide. Cutting area: 6" (15.2cm) x β½" (12.7mm). US specification & reliable quality gunsmith files by Brownells. Part Nr: 31043.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells 65Β° 1911 Dovetail Type Slot Sight Base Files #2 65Β° Sight Base File US Specifications
USD 39.99
(Indicative price - actual current price possibly lower)
Gunsmith Files US Specifications
Technical data & information: Designed especially for widening and final fitting after using our 65β° sight base cutter to cut the basic slot. Or, can open up a 60β° slot to proper 65β° angle if changing to a new sight design. Has true parallel cutting edges for precision filing, giving you full control over the angle of the dovetail. One cutting side only, with the other two sides safe, so you can widen or deepen sight slots safely without fear of changing the other dimensions. Mfg: brownells specs: 7" (17.8cm) long. .280" (7.1mm) wide. #1, medium, double-cut. #2, fine, single-cut. US specification & reliable quality gunsmith files by Brownells. Part Nr: LPTR005.
More Details : click here
SEARCH this site : click here
|
|
|
Apex Tool Group Swiss Pattern Barrette Files 6" Barrette #1 Cut US Specifications
USD 42.99
(Indicative price - actual current price possibly lower)
Gunsmith Files US Specifications
Technical data & information: These beautiful little swiss pattern files are made especially for getting into tight places, coming exactly up to right angles, working over dovetails, slots and other precision filing. Flat side has double-cut teeth. Back and edges are safe (no teeth) with edges beveled back on 33β° angle. Taper from maximum width shown below to long point. Mfg: apex tool group specs: 4 (10.2cm), 1/2" (12.7mm) wide. #0 or #1 cut. 6" (15.2cm), 11/16" (17.5mm) wide. #0, #1 or #2 cut. Vkhilfef corresponds to swiss cut no. 1. US specification & reliable quality gunsmith files by Apex. Part Nr: 31029.
More Details : click here
SEARCH this site : click here
|
|
|
Friedr. Dick Gmbh Screw Head Files Set US Specifications
USD 122.99
(Indicative price - actual current price possibly lower)
Gunsmith Files US Specifications
Technical data & information: High-quality, steel files designed for one purpose only x"x to cut perfectly square screw slots every time. #7, #9, and #11 files cover the most common slot sizes. Smooth-sided to cut only on the edge. Will not widen the slot as it deepens, or damage the screw head. Cleans up marred slots on hard to replace screws or cuts slots in new screws. Use with needle file handles. These files are very thin for precise cutting. Sorry, cannot guarantee against bending or breakage. Sold individually or as a set. Mfg: friedr. Dick gmbh specs: 5βύ" (14.6cm) overall length. Shank is 1β½" (3.8cm) long. Thickness: #7, .027" (.69mm), #9, .035" (.89mm), #11, .043" (1.1mm). Set includes one each, #7, #9, #11 files. US specification & reliable quality gunsmith files by Freed. Part Nr: SCREWHEADFILE.
More Details : click here
SEARCH this site : click here
|
|
|
Apex Tool Group Swiss Pattern Barrette Files 4" Barrette #0 Cut US Specifications
USD 29.99
(Indicative price - actual current price possibly lower)
Gunsmith Files US Specifications
Technical data & information: These beautiful little swiss pattern files are made especially for getting into tight places, coming exactly up to right angles, working over dovetails, slots and other precision filing. Flat side has double-cut teeth. Back and edges are safe (no teeth) with edges beveled back on 33β° angle. Taper from maximum width shown below to long point. Mfg: apex tool group specs: 4" (10.2cm), 1/2" (12.7mm) wide. #0 or #1 cut. 6" (15.2cm), 11/16" (17.5mm) wide. #0, #1 or #2 cut. Vkhilfef corresponds to swiss cut no. 1. US specification & reliable quality gunsmith files by Apex. Part Nr: 35031N.
More Details : click here
SEARCH this site : click here
|
|
|
Friedr. Dick Gmbh Professional Gunsmith Needle File Set Professional Gunsmith Needle File Cut #1 Hand US Specifications
USD 11.99
(Indicative price - actual current price possibly lower)
Gunsmith Files US Specifications
Technical data & information: Finest professional quality gunsmith needle files in set of 12 assorted shapes. Made of best materials to rigid quality standards. Cuts are deep and durable. Knurled handles for no-slip use or convenient lock-up in needle file handles shown below. Comes in heavy-duty, see-through, pocketed roll with snap closure. Protects files, yet gives immediate access to shape wanted. Sold in sets or singles. Mfg: friedr. Dick gmbh specs: set contains 1 each of the following shapes: barrette, hand, hand with round edges, warding, crochet, three square, square, half round, round, knife, slitting and crossing. Approx. 5-1/2" (14cm) overall length. Shank 2-3/8" (6cm) x 1/8" (3.2mm) dia. US specification & reliable quality gunsmith files by Freed. Part Nr: 21121410.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Brownells Half Round Files Smooth Cut 8" (20.3cm) US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
