Brownells Hole Center Punches #10 Hole Center Punch US Specifications
Gunsmith Punches by Brownells
|
Technical data & information: 3 special center punches with outside diameters (o.D.) that match the clearance drill size of the most popular sight, rib and scope base mounting screws. Ground, parallel-sided punches reach through even the thickest handgun rib. Ends guess-work and hole center-to-center spacing problems. To use: level gun in vise or scope mounting jig, position and level sight, rib or base, and clamp in place. Place correct size punch in hole and lightly tap with a 4-oz. Hammer. Remove base; drill and tap first hole; re-install base and check positioning. If everything is "square", re-clamp and finish other holes. Mfg: brownells specs: 2-βύ" (7.0cm) long. ß?" (6.3cm) dia. Knurled handle. Hardened, tool steel. Set contains one of each size. US specification & reliable quality gunsmith punches by Brownells. Part Nr: 080-732-010.
 Indicative Price: USD 3.99
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more high specification gun & shooting items : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Brownells Brass Punch Set US Specifications
USD 119.99
(Indicative price - actual current price possibly lower)
Gunsmith Punches US Specifications
Technical data & information: Precision machined, non-marring brass punches drift sights and drive pins without risk of damage to the sight, pin, or firearm. We combined 20 of our most popular non-marring brass punches, added a compact bench block and came up with a great addition for the work bench. Features (4) starter punches, (8) roll pin punches, and (8) standard punches for a variety of different jobs. Delrin bench block holds and organizes all 20 punches for easy access, plus is resistant to most solvents. Starter punches are used to start the removal of steel or aluminum pins. Short, tapered shaft is extra stiff to prevent bending and twisting. Roll pin punches feature a special tip that centers inside the h mfg: brownells specs: brass. Starter punches, contains (1) of each diameter: 1⁄16" (1.6mm), 3⁄32" (2.4mm), 1⁄8" (3.2mm), 5⁄32" (4mm). Roll pin punches, contains (1) of each diameter: 1⁄16", 3⁄32", 1⁄8", 5⁄32", 3⁄16". US specification & reliable quality gunsmith punches by Brownells. Part Nr: 080-000-649.
More Details : click here
SEARCH this site : click here
|
|
|
Geissele Automatics Roll Pin Tool For Gas Block US Specifications
USD 12.5
(Indicative price - actual current price possibly lower)
Gunsmith Punches US Specifications
Technical data & information: Ingenious tool holds the tiny gas tube roll pin securely to make installation easy and fast. No more fumbling with needle nose pliers or tweezers, only to have the pin fly fly off and get lost! pin is pressed into the tool for a rock-solid hold while the tapered tip enables precise control and correct placement. Safely gets the pin partially in, so the job can be finished with a normal roll pin punch. All-steel construction, matte black oxide finish. Mfg: geissele automatics llc. US specification & reliable quality gunsmith punches by Geissele. Part Nr: 10225.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Starter Punch Set Replaceable Pins (6) 1"x.060" US Specifications
USD 9.99
(Indicative price - actual current price possibly lower)
Gunsmith Punches US Specifications
Technical data & information: We are constantly encouraging you to always use starting punches to break tight pins loose, then use a "drift" or pin-punch to drive the pin the rest of the way out. This saves bending pin punches, but much more importantly, it prevents fine guns from getting pin punch mars should the pin punch bend and slip, or, break, and scratch. To bring you the best possible starter punches, we have had special, short replaceable pins made up to fit our famous gunsmith's replacement punch set handles. Their regular use will definitely improve your production . . . And your professionalism! mfg: brownells specs: handle 3" (7.6cm) long x 3/8" (9.5mm) diameter. Pins 1" (2.5cm) long. Set includes 3 punches and three pins. Replacement pin sizes: .039" (.99mm) for 3⁄64" (1.2mm) diameter pins. .060" (1.5mm) for 1⁄16" (1.6mm) diameter pins; .091" (2.3mm) for 3⁄32" (2.4mm) diameter pins. US specification & reliable quality gunsmith punches by Brownells. Part Nr: 080-513-660.
More Details : click here
SEARCH this site : click here
|
|
|
Lyman Deluxe Punch Set Roll Pin Punch Set US Specifications
USD 16.99
(Indicative price - actual current price possibly lower)
Gunsmith Punches US Specifications
Technical data & information: Remove and replace hollow split roll pins easily and safely using these special-built round-nose punches. The round tip locks into the pin to keep the punch from slipping and damaging receivers, trigger assemblies, and other fragile mechanisms. Machined knurling also helps you maintain a secure grip and retain control of the punch. Made of through-hardened 4140 steel for maximum strength and years of dependable service. Mfg: lyman specs: 4140 chrome-moly steel. Set of 4 punches, approximately 4" (10.2cm) long, in 1⁄16" (1.6mm), 3⁄32" (2.4mm), 1⁄8" (3.2mm), and 5⁄32" (4mm) diameters. US specification & reliable quality gunsmith punches by Lyman. Part Nr: 7031277.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Nylon Front Sight Drift Punch Nylon Drift Punches US Specifications
USD 5.99
(Indicative price - actual current price possibly lower)
Gunsmith Punches US Specifications
Technical data & information: This handy little punch is made for just one purpose . . . To drive the front sight in or out without marring it or the barrel. We first tried brass, but as you know, it leaves a "brass tracking" wherever it rubs. We then tried fiber, but after a few hard blows it shatters. Nylon doesn't mark the barrel or sight, nor does it shatter or lose its shape after hard and prolonged use. Mfg: brownells specs: 4" (10.2cm) long. 5/16" (7.9mm) diameter. Polyenco nylon. Sold in a set of 3. US specification & reliable quality gunsmith punches by Brownells. Part Nr: 080-478-000.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Alignment & Push Punches Set Of Four Brass Punches US Specifications
USD 35.99
(Indicative price - actual current price possibly lower)
Gunsmith Punches US Specifications
Technical data & information: For the professional and home gunsmith alike these punches take much of the frustration out of aligning parts and assemblies. And they provide faster and easier disassembly, too. Furnished with a large, easy-to-grasp, handle that gives excellent control for aligning holes and starting pins. Slightly undersized shank provides a close fit that won't bind in the hole. A slight taper, 3⁄4" from the end is especially useful when fitting parts that require repeated assembly and disassembly. Four sizes fit the majority of pins found on the ar-15, 1911 auto, remington 870 and ruger revolvers. Won't roll off bench. Alignment/push punch set includes one each of the punches liste mfg: brownells specs: handle, plastic. Shank, unhardened steel drill rod, or 360 alloy brass . 3ß?" (8.2cm) long. Oal, 4βύ" (12.1cm) long. Alignment/push punch set, contains (4) brass and (4) steel punches, (1) brass and (1) steel of each diameter: .092" (2.3mm), .120" (3mm). US specification & reliable quality gunsmith punches by Brownells. Part Nr: 080-000-028.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Gunsmith Master Punch Set US Specifications
USD 109.99
(Indicative price - actual current price possibly lower)
Gunsmith Punches US Specifications
Technical data & information: The punches in this master set were specifically chosen for the professional gunsmith. We handpicked high quality punches and added a nylon bench block, nylon/brass hammer, and neoprene gun mat, then packed them in a durable polyethylene case for easy access and storage in the shop. Features (4) premium quality starter punches to break loose stuck or tight pins, (4) pin punches with hardened points that won't bend, (1) prick punch for marking spots before center punching, and (1) center punch for starting holes before drilling. Also includes (4) premium brass punches for drifting sights, driving pins or fitting parts when marking or scratching the surface can mean the difference betwee mfg: brownells specs: polyethylene case, 14" (35.6cm) long, 9" (23cm) wide, 1-7⁄8" (4.7cm) high. Pin/starter punches, tool steel, knurled body. 4" (10.2cm) long x 1⁄16" (1.6mm), 3⁄32" (2.4mm), 1⁄8" (3.2mm), 5⁄32" (4mm) dia. Center punch, t. US specification & reliable quality gunsmith punches by Brownells. Part Nr: 080-000-569.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Roll Pin Punches #6 Roll Pin Punch US Specifications
USD 2.99
(Indicative price - actual current price possibly lower)
Gunsmith Punches US Specifications
Technical data & information: With these pins becoming so common in guns, having the right punches to remove them is absolutely necessary. These punches are the only way to remove and re-use roll or spring pins without causing glaring damage to the pins. Solid steel punches, with long, parallel-ground points and knurled section for better gripping. Mfg: brownells specs: kit includes one each of seven sizes: #1, 1/16" (1.6mm); #2, 5/64" (2.0mm); #3, 3/32" (2.4mm); #4, 1/8" (3.2mm); #5, 5/32" (4.0mm); #6, 3/16" (4.8mm); #7, 7/32" (5.5mm). US specification & reliable quality gunsmith punches by Brownells. Part Nr: 25005939.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Brownells Hole Center Punches #10 Hole Center Punch US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
