Brownells Nylon/Brass Drift Punch 4 Way Nylon/Brass Punch Set US Specifications
Gunsmith Punches by Brownells
|
Technical data & information: Great combination punch for gunsmith, machinist and toolmaker. Hi-impact steel handle with knurled grip for easy holding and accurate control. Built to withstand maximum impact with a minimum of distortion. Interchangeable and replaceable tips are available in: 5/16" nylon with steel reinforcing pin to prevent bending or breakage while giving completely mar-free punching action; brass in various diameters for a harder-than-nylon but softer-than-steel impact where slight discoloration is acceptable. Aluminum in two diamters for harder-than-nylon but softer-than-steel impact where slight discoloration is acceptable. Remington shotgun punch tip which is .165" di mfg: brownells specs: handle is 3" (7.6cm) long x 3.8" (9.5mm) diamter. Tips are 1βό" (3.2cm) long. US specification & reliable quality gunsmith punches by Brownells. Part Nr: 080-475-100.
 Indicative Price: USD 18.99
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more high specification gun & shooting items : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Brownells Roll Pin Punches #4 Roll Pin Punch US Specifications
USD 6.99
(Indicative price - actual current price possibly lower)
Gunsmith Punches US Specifications
Technical data & information: With these pins becoming so common in guns, having the right punches to remove them is absolutely necessary. These punches are the only way to remove and re-use roll or spring pins without causing glaring damage to the pins. Solid steel punches, with long, parallel-ground points and knurled section for better gripping. Mfg: brownells specs: kit includes one each of seven sizes: #1, 1/16" (1.6mm); #2, 5/64" (2.0mm); #3, 3/32" (2.4mm); #4, 1/8" (3.2mm); #5, 5/32" (4.0mm); #6, 3/16" (4.8mm); #7, 7/32" (5.5mm). US specification & reliable quality gunsmith punches by Brownells. Part Nr: 25003939.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Alignment & Push Punches .246" Diameter Steel US Specifications
USD 8.99
(Indicative price - actual current price possibly lower)
Gunsmith Punches US Specifications
Technical data & information: For the professional and home gunsmith alike these punches take much of the frustration out of aligning parts and assemblies. And they provide faster and easier disassembly, too. Furnished with a large, easy-to-grasp, handle that gives excellent control for aligning holes and starting pins. Slightly undersized shank provides a close fit that won't bind in the hole. A slight taper, 3⁄4" from the end is especially useful when fitting parts that require repeated assembly and disassembly. Four sizes fit the majority of pins found on the ar-15, 1911 auto, remington 870 and ruger revolvers. Won't roll off bench. Alignment/push punch set includes one each of the punches liste mfg: brownells specs: handle, plastic. Shank, unhardened steel drill rod, or 360 alloy brass . 3ß?" (8.2cm) long. Oal, 4βύ" (12.1cm) long. Alignment/push punch set, contains (4) brass and (4) steel punches, (1) brass and (1) steel of each diameter: .092" (2.3mm), .120" (3mm). US specification & reliable quality gunsmith punches by Brownells. Part Nr: 080-000-032.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Starter Punch Set Replaceable Pins (6) 1"x.091" US Specifications
USD 10.99
(Indicative price - actual current price possibly lower)
Gunsmith Punches US Specifications
Technical data & information: We are constantly encouraging you to always use starting punches to break tight pins loose, then use a "drift" or pin-punch to drive the pin the rest of the way out. This saves bending pin punches, but much more importantly, it prevents fine guns from getting pin punch mars should the pin punch bend and slip, or, break, and scratch. To bring you the best possible starter punches, we have had special, short replaceable pins made up to fit our famous gunsmith's replacement punch set handles. Their regular use will definitely improve your production . . . And your professionalism! mfg: brownells specs: handle 3" (7.6cm) long x 3/8" (9.5mm) diameter. Pins 1" (2.5cm) long. Set includes 3 punches and three pins. Replacement pin sizes: .039" (.99mm) for 3⁄64" (1.2mm) diameter pins. .060" (1.5mm) for 1⁄16" (1.6mm) diameter pins; .091" (2.3mm) for 3⁄32" (2.4mm) diameter pins. US specification & reliable quality gunsmith punches by Brownells. Part Nr: 080-513-691.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Gunsmith Replaceable Pin Punch Set Replacement Pins 2 1/2"x.039" US Specifications
USD 14.99
(Indicative price - actual current price possibly lower)
Gunsmith Punches US Specifications
Technical data & information: Finally! what we think is the answer to the pin punch headache that has plagued us, and every other gunsmith who has ever knocked out a gun pin, had the punch break or bend, and been out of business until a new one could be made or ordered. Now, just replace the tip!handles, with removable knurled-chuck to hold punch, are made of powerful, fatigueproof c.R.S. Steel, tensile strength of over 140,000 psi (min.). Replaceable punch, the secret of the tool. These are special, tool steel, bevel-headed punches designed for the tool, die and mold manufacturers as perforators, punches, ejectors and core pins. Oil hardened to rc 58-60. Heads are annealed to rc 42-45. They come in two lengths a mfg: brownells specs: handle 3" (7.6cm) long x 3/8" (9.5mm) diameter. Pins are 2" (5.1cm) or 2β½" (6.3cm) long. Replacement pin punch sets include the following pin sizes: 0.039", 0.060", and 0.091" in either 2" or 2 β½" lengths. US specification & reliable quality gunsmith punches by Brownells. Part Nr: 080-510-639.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Cup Tip Punches Model 3 .072" (1.8mm) Diameter/Long Length US Specifications
USD 17.99
(Indicative price - actual current price possibly lower)
Gunsmith Punches US Specifications
Technical data & information: Eight concave "cupped" tip punches to precisely fit the round head pins found on smith & wesson handguns. Won't flatten the pin top and ruin the gun's looks. Made to the same specs as those used by the factory. Use 3mm punch on sig handguns. Complete set (set d listed below) includes a delrin bench block that holds and organizes all eight punches. Bench block also available separately 080-000-644. Mfg: brownells specs: punches, steel. 5/16" (7.9mm) wide hex handle. .057" (1.44mm)/long; .066" (1.7mm)/long; .072" (1.8mm/long; .040" (1mm)/short; .050" (1.3mm)/short; .050" (1.3mm)/long; 3mm (.118")/long; 3mm (.118")/short. Bench bl. US specification & reliable quality gunsmith punches by Brownells. Part Nr: 080-620-003.
More Details : click here
SEARCH this site : click here
|
|
|
Gauge Rite Products Top Dead Center Punch US Specifications
USD 37.99
(Indicative price - actual current price possibly lower)
Gunsmith Punches US Specifications
Technical data & information: The tdc is a rugged, foolproof tool to end the problems of off-center-work, broken taps and drills that come about from trying to "eyeball" top dead center on gun barrels or other round stock. Simple to use, just level and plumb the rifle on the drill press, place tdc on barrel or receiver, level the bubble and tap the punch. The punch mark is top dead center. Precision made; shockproof level. Mfg: gauge-rite products specs: body, 1-15/16" (23.8mm) x 1-β½" (3.8mm) x 1" (2.5cm), aluminum. Punch, βό" (6.3mm) diameter tool steel. Locating rod, 5-β½" (14cm) long. US specification & reliable quality gunsmith punches by Gauge-Rite. Part Nr: 871-100-000.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Alignment & Push Punches .151" Diameter Brass US Specifications
USD 8.99
(Indicative price - actual current price possibly lower)
Gunsmith Punches US Specifications
Technical data & information: For the professional and home gunsmith alike these punches take much of the frustration out of aligning parts and assemblies. And they provide faster and easier disassembly, too. Furnished with a large, easy-to-grasp, handle that gives excellent control for aligning holes and starting pins. Slightly undersized shank provides a close fit that won't bind in the hole. A slight taper, 3⁄4" from the end is especially useful when fitting parts that require repeated assembly and disassembly. Four sizes fit the majority of pins found on the ar-15, 1911 auto, remington 870 and ruger revolvers. Won't roll off bench. Alignment/push punch set includes one each of the punches liste mfg: brownells specs: handle, plastic. Shank, unhardened steel drill rod, or 360 alloy brass . 3ß?" (8.2cm) long. Oal, 4βύ" (12.1cm) long. Alignment/push punch set, contains (4) brass and (4) steel punches, (1) brass and (1) steel of each diameter: .092" (2.3mm), .120" (3mm). US specification & reliable quality gunsmith punches by Brownells. Part Nr: 080-000-026.
More Details : click here
SEARCH this site : click here
|
|
|
Lyman Pistol Punch Set US Specifications
USD 17.99
(Indicative price - actual current price possibly lower)
Gunsmith Punches US Specifications
Technical data & information: Five steel and brass gunsmith punches handle a variety of any pistol disassembly and reassembly jobs. Each precision-machined punch is through-hardened for maximum strength. Knurled handles ensure a firm grip to prevent slippage and protect your gun's finish from scratches and scuffs. Mfg: lyman specs: pin punches, 4140 chrome-moly steel. A, 3-3/8" (9.2cm) x 5/32" (4mm) diameter. B, 3-5/8" (9.2cm) long x 3/32" (2.4cm) dia. D, 4β½" (11.4cm) long x 5/32" (4mm) dia. F, 4βό" (10.8cm) long x 1/8" (3.2mm) dia. Drift punch brass. 3&f. US specification & reliable quality gunsmith punches by Lyman. Part Nr: 7031271.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Premium Roll Pin Holders 5/64" Diameter Roll Pin Holder US Specifications
USD 7.99
(Indicative price - actual current price possibly lower)
Gunsmith Punches US Specifications
Technical data & information: Brownells roll spring (pin) holders are accurately drilled to hold tiny roll springs so perfect alignment is obtained. The 1/16" roll spring (pin) holder is notched to clear m16/ar-15 rear sights. The 3.5mm is excellent for holding the pin that retains the breech block on sig handguns. This fine set has sizes 1/16" (notched), 5/64", 3/32", 1/8", 3.5mm and each made from 5/16" hex high carbon 5160 steel that is bainite heat treated for strength. Single groove in grip section and laser marked for quick identification. 100% made in the usa. Mfg: brownells. US specification & reliable quality gunsmith punches by Brownells. Part Nr: B564RSH.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Premium Roll Pin Holders 1/8" Diameter Roll Pin Holder US Specifications
USD 7.99
(Indicative price - actual current price possibly lower)
Gunsmith Punches US Specifications
Technical data & information: Brownells roll spring (pin) holders are accurately drilled to hold tiny roll springs so perfect alignment is obtained. The 1/16" roll spring (pin) holder is notched to clear m16/ar-15 rear sights. The 3.5mm is excellent for holding the pin that retains the breech block on sig handguns. This fine set has sizes 1/16" (notched), 5/64, 3/32", 1/8", 3.5mm and each made from 5/16" hex high carbon 5160 steel that is bainite heat treated for strength. Single groove in grip section and laser marked for quick identification. 100% made in the usa. Mfg: brownells. US specification & reliable quality gunsmith punches by Brownells. Part Nr: B432RSH.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Brownells Nylon/Brass Drift Punch 4 Way Nylon/Brass Punch Set US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
