Davidson Action Wrenches Davidson Rear Entry Action Wrench Remington Shilen Dga US Specifications
Gunsmith Rifle Wrenches by Davidson
|
Technical data & information: Davidson action wrenches are designed for the switch barrel shooter with a custom built rifle. Manufactured from 7075-t6 aluminum, these tools are not designed to remove factory installed barrels. Action wrenches are used to break the action free from the barrel while the barrel is held in a barrel vise. This allows the shooter to change barrels in a matter of a few minutes. All rear action wrenches are inserted through the rear of the action and have a 3/4 inch hex end which requires a wrench for turning. Port wrenches are inserted through the action port and are turned by hand. Barrel vise available separately. Mfg: davidson. US specification & reliable quality gunsmith rifle wrenches by Davidson. Part Nr: DW2.
 Indicative Price: USD 84.99
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more high specification gun & shooting items : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Precision Reflex Dpms/Kac 308 Barrel Nut Wrench US Specifications
USD 34.99
(Indicative price - actual current price possibly lower)
Gunsmith Rifle Wrenches US Specifications
Technical data & information: Barrel nut torq wrench for dpms & kac rifles. This wrench allows the shooter to put the exact amount of pressure needed on the barrel nut while attaching the barrel to the receiver. Constructed of 3/8 high steel with 4 lugs on each side to accommodate the dpms and kac barrel nuts. Works with any 3/8 or β½ drive torque wrench. This wrench is for 24-tooth free float barrel nuts. Mfg: precision reflex, inc. Specs: weight, .525 lbs. Fits dpms, r-25, knights barrel nut patterns in .308. US specification & reliable quality gunsmith rifle wrenches by Precision. Part Nr: 30086.
More Details : click here
SEARCH this site : click here
|
|
|
Gemtech Quickmount Installation Tool US Specifications
USD 47.99
(Indicative price - actual current price possibly lower)
Gunsmith Rifle Wrenches US Specifications
Technical data & information: Gemtech's handy little quickmount installation tool makes attaching any quickmount muzzle device, either flash hider or muzzle brake, fast and easy. The quickmount installation tool is notched for a snug, no-slip fit over the "ears" of all qm muzzle devices. Fits β½" ratchet or torque wrench (maximum 35 ft. Lbs. Torque) made of hardened steel compact, carry in your range back or tool kit, just in case your rifle's qm device shoots loose the quickmount installation tool is ideal for gunsmiths, gun shops, instructors, or gun owners who frequently install gemtech quickmount devices. Mfg: gemtech. US specification & reliable quality gunsmith rifle wrenches by Gemtech. Part Nr: 12164.
More Details : click here
SEARCH this site : click here
|
|
|
Tapco Weapons Accessories Ar 15/M16 Armorer's Tool Tapco Armorer's Tool US Specifications
USD 33.99
(Indicative price - actual current price possibly lower)
Gunsmith Rifle Wrenches US Specifications
Technical data & information: Handy all-in-one tool handles the tasks necessary to build and maintain your ar-15 or m16. It's a barrel nut wrench, muzzle device wrench, spanner wrench, forearm wrench, flat tip screwdriver, a2 tube remover, receptacle for β½" drive/torque wrench, and a bottle opener. Long handle give plenty of leverage for buttstock and barrel removal/installation, and the β½" drive receptacle allows the use of a torque wrench, so you can get things tightened down correctly. It even has a flat face on one side that can be used as a hammer. Mfg: tapco weapons accessories specs: heat treated alloy steel, matte olive drab powder coat finish. US specification & reliable quality gunsmith rifle wrenches by Tapco. Part Nr: 16610.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Ar 15 Sight Wrench A1/A2 Ar 15 Sight Wrench US Specifications
USD 19.99
(Indicative price - actual current price possibly lower)
Gunsmith Rifle Wrenches US Specifications
Technical data & information: Precision machined from tough, stressproof steel with square-profile fingers that grip the sight notches firmly and won't "roll out"; provides easy, exact sight adjustment. Plus, they resist bending and breaking to give years of service. Deeply drilled body fits both issue and tall blade sights. An extra-nice touch are the hex-shaped bodies; they're easy to grasp, easy to turn and won't roll off your bench. Three tools: a1 five-prong and a2 four-prong fit front and rear sights. A1/a2 is double ended to fit both five-detent a1 and four-detent, square blade, a2 front sights only. A2 wrenches also fit fn scar. Mfg: brownells specs: stressproof steel, blue finish. A1: five-prong and a2: four-prong (adjusts front and rear). 1-3/8" (3.5cm) long x βύ" (19mm) dia. A1/a2: 2β½" (6.4cm) long four-prong/five-prong front only wrench. A2 wrench is designed for the standard a-2 style front post. US specification & reliable quality gunsmith rifle wrenches by Brownells. Part Nr: 078-000-010.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Car 15/M4 Buttstock Wrench US Specifications
USD 79.99
(Indicative price - actual current price possibly lower)
Gunsmith Rifle Wrenches US Specifications
Technical data & information: Dedicated wrench has four precision-machined teeth that ensure full, non-slip engagement of all four notches in an m4-type receiver extension nut for easy removal and installation of collapsible carbine buttstocks. Transfers all the torquing force to the nut for fast tightening or removal without risk of damage to nut, extension tube, or receiver caused by the wrench slipping. Includes the handy add-on features of our universal m4 buttstock tool: pry blade/screwdriver, " square torque drive opening, fixed stock receiver extension remover, and a convenient hole in the handle for hanging the wrench on a pegboard. Heavy duty steel construction, machined from a single piece of .312" thick steel mfg: brownells specs: steel, hardened, black oxide finish. 7-1/8" (18.1cm) long. Fits current-model m4-type receiver extension nuts with four square notches. US specification & reliable quality gunsmith rifle wrenches by Brownells. Part Nr: 100254.
More Details : click here
SEARCH this site : click here
|
|
|
Rock River Arms Ar 15 M4 Stock Wrench US Specifications
USD 9.99
(Indicative price - actual current price possibly lower)
Gunsmith Rifle Wrenches US Specifications
Technical data & information: Steel, dual function wrench lets you easily remove your old extension tube and install a new-style, a4 stock. Spanner has three lugs to fit the a4-style castle nut. Provides a non-slip fit so you can hand tighten the castle nut to the receiver. Also, the comfortable, rubber coated handle features a cutout to fit the receiver extension tube to remove the a1 or a2 stock. Mfg: rock river arms specs: steel, parkerized finish. 7-5/8" (19.3cm) long. US specification & reliable quality gunsmith rifle wrenches by Rock River. Part Nr: AR0165.
More Details : click here
SEARCH this site : click here
|
|
|
Barska Ar 15 Combo Wrench Tool US Specifications
USD 24.99
(Indicative price - actual current price possibly lower)
Gunsmith Rifle Wrenches US Specifications
Technical data & information: Multi-function steel tool helps keep your rifle in the ready condition. Use it to tighten or remove the barrel nut, and install or remove most popular free-float handguard tubes. Single-point wrench tightens/removes the receiver extension nut, and side notches tighten or remove a variety of muzzle devices, including flash hiders and muzzle brakes. It even has a tab that acts as a screwdriver for the a1/a2 stock. Includes β½" drive opening. Mfg: barska specs: carbon steel, black, painted finish. 12 5⁄8" (32cm) long. US specification & reliable quality gunsmith rifle wrenches by Barska. Part Nr: AW11167.
More Details : click here
SEARCH this site : click here
|
|
|
Arrington Accuracy Works Ar 15/M16 Free Float Handguard Strap Wrench Free Float Handguard Wrench US Specifications
USD 95.99
(Indicative price - actual current price possibly lower)
Gunsmith Rifle Wrenches US Specifications
Technical data & information: Heavy-duty strap wrench gives you plenty of leverage to remove screw-on free-float handguard tubes, even those sealed with thread locker or "frozen" on by corrosion between the barrel nut and guard. Large, adjustable strap of tough, reinforced rubber wraps securely around any diameter handguard, with no risk of scratching the finish, and grasps the guard tighter as you apply pressure. Lets you position the strap right over the threaded end of the tube for maximum torque transfer where it's needed most. Hefty steel handle won't bend, no matter how much force you apply, and machined aluminum head maintains optimal alignment of handguard, strap, and handle. Indispensable time-saver for professi mfg: arrington accuracy works specs: steel handle, aluminum head, rubber strap. 10" (25.4cm) o.A.L. US specification & reliable quality gunsmith rifle wrenches by Arrington. Part Nr: 100-004-209.
More Details : click here
SEARCH this site : click here
|
|
|
Surgeon Rifles Remington 700 Action Wrench Surgeon Action Wrench US Specifications
USD 128.99
(Indicative price - actual current price possibly lower)
Gunsmith Rifle Wrenches US Specifications
Technical data & information: Easy-to-use alternative to old-fashioned t-handle action wrenches is specifically designed to prevent damage to receiver when installing and removing barrels. Lets you torque a remington 700 or surgeon rifles action as close as possible to the barrel threads to eliminate unwanted twisting or bowing of the action that can result in distorted bolt raceways and other expensive damage. Inserts in the ejection port; the two "ears" fit in the raceways at the front ring. Insert a β½" drive ratchet handle or torque wrench and tighten/loosen the action to the barrel. Works on any length action. Mfg: surgeon rifles specs: steel, black oxide finish. Fits remington 700 and surgeon rifles receivers. Do not exceed 100 foot pounds torque. US specification & reliable quality gunsmith rifle wrenches by Surgeon. Part Nr: 100-003-675.
More Details : click here
SEARCH this site : click here
|
|
|
Davidson Action Wrenches Davidson Port Action Wrench Winchester (Rh) US Specifications
USD 103.99
(Indicative price - actual current price possibly lower)
Gunsmith Rifle Wrenches US Specifications
Technical data & information: Davidson action wrenches are designed for the switch barrel shooter with a custom built rifle. Manufactured from 7075-t6 aluminum, these tools are not designed to remove factory installed barrels. Action wrenches are used to break the action free from the barrel while the barrel is held in a barrel vise. This allows the shooter to change barrels in a matter of a few minutes. All rear action wrenches are inserted through the rear of the action and have a 3/4 inch hex end which requires a wrench for turning. Port wrenches are inserted through the action port and are turned by hand. Barrel vise available separately. Mfg: davidson. US specification & reliable quality gunsmith rifle wrenches by Davidson. Part Nr: DW12.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Davidson Action Wrenches Davidson Rear Entry Action Wrench Remington Shilen Dga US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
