Ed Brown 1911 Perfection Sear US Specifications
Handgun Sears by Ed Brown
|
Technical data & information: Perfection sear is pre-fit to provide the least amount of hand work prior to installation. Primary angle is already cut; simply stone the correct relief angle and install. Mfg: ed brown specs: 4340 tool steel, blued. Hardened to rc 50. US specification & reliable quality handgun sears by Ed Brown. Part Nr: 874.
 Indicative Price: USD 32.99
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more high specification gun & shooting items : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Apex Tactical Specialties Inc S&W M&P Fully Machined Sear 1 Dot Fully Machined Sear For M&P 9/357/40 US Specifications
USD 39.85
(Indicative price - actual current price possibly lower)
Handgun Sears US Specifications
Technical data & information: Apex tactical's fully machined sear for the smith & wesson m&p series has a different geometry from the factory part that dramatically reduces trigger pull weight to less than 5 lbs., while it also shortens overtravel and improves reset speed. The end result is much better trigger feel overall. Use the fully machined m&p sear as a standalone upgrade or in conjunction with an apex spring kit and ultimate striker block (both sold separately). The apex fully machined sear is available in two models: 1-dot fits all current-production m&p pistols in 9mm, .357 sig and .40 s&w. Does not fit m&p45 or shield models. 2-dot fits current-production m&p pis mfg: apex tactical specialties inc specs: hardened a2 tool steel, natural finish. US specification & reliable quality handgun sears by Apex. Part Nr: 100074.
More Details : click here
SEARCH this site : click here
|
|
|
Power Custom 1911 Hammer Sear & Grip Safety Shims 1911 Sear Shims 10 Pak US Specifications
USD 24.99
(Indicative price - actual current price possibly lower)
Handgun Sears US Specifications
Technical data & information: Insert these precision-manufactured shims between the frame and the fire control parts on your 1911 auto for a smoother, more consistent-feeling trigger pull without replacing components. Removes unwanted side-to-side movement and provides a quick fix for out-of-tolerance hammers, sears, grip safeties, and frames. Machined from stainless steel, fully hardened and tempered for long wear. Sold in 10 paks. Mfg: power custom specs: machined stainless steel, silver finish. .002" (.0051mm) thick. Fits colt 1911 auto and clones. US specification & reliable quality handgun sears by Power. Part Nr: 1911SS.
More Details : click here
SEARCH this site : click here
|
|
|
Wilson Combat 1911 Value Line Hammer & Sear Value Sear US Specifications
USD 15.99
(Indicative price - actual current price possibly lower)
Handgun Sears US Specifications
Technical data & information: Ready to install, fully finished parts give a crisp, clean trigger pull. All engagement surfaces are correctly ground for positive hammer/sear engagement. Hammer has low-mass oval cut spur that reduces lock time. Narrowed sides improve function by reducing drag. Sear primary angle is cut; just polish it and stone the relief angle for a super clean breaking trigger. Mfg: wilson combat specs: mim cast 4340 steel, hardened to rc 47-52. Matte black finish. US specification & reliable quality handgun sears by Wilson. Part Nr: 314C.
More Details : click here
SEARCH this site : click here
|
|
|
Cylinder & Slide 1911 Super Lite Low Mass Sear US Specifications
USD 74.99
(Indicative price - actual current price possibly lower)
Handgun Sears US Specifications
Technical data & information: Manufactured from the same aero space steel alloy as the premium hammers. Extremely low mass due to innovative recontouring. Designed to be used for extremely light trigger pulls. Faster reset time due to low mass which reduces the chance of following with very light trigger pulls. Sear bearing surface micro honed to produce that 2 lb. Pull easily. Heat treated to 50-55 rockwell c for extreme durability. Mfg: cylinder & slide specs: for 1911 models. US specification & reliable quality handgun sears by Cylinder & Slide. Part Nr: CS0026.
More Details : click here
SEARCH this site : click here
|
|
|
Harrison Design & Consulting 1911 Gunsmith Sear 1911 Non Prepped Gunsmith Sear US Specifications
USD 29.99
(Indicative price - actual current price possibly lower)
Handgun Sears US Specifications
Technical data & information: For those of you who buy the hd-806 true radius pro sear stoning jig and want to stone your own sear nose, but find that many aftermarket sears are either barely too short or are only tall enough to give you just one crack at stoning the nose into the radius, the hd-122-g gunsmith's sear may be just what you're looking for. It's the same edm-machined, tool steel sear that we used in all of the harrison design ignition sets, but made longer from the sear pin centerline to the nose and with the nose unfinished. They typically measure .412" /- .002". This will let the gunsmith machine and stone the sear nose to the optimum length and nose configurat mfg: harrison design & consulting. US specification & reliable quality handgun sears by Harrison. Part Nr: HD122G.
More Details : click here
SEARCH this site : click here
|
|
|
Apex Tactical Specialties Inc S&W M&P Fully Machined Sear 2 Dot Fully Machined Sear For M&P .45/M&P M2.0/Shield US Specifications
USD 39.85
(Indicative price - actual current price possibly lower)
Handgun Sears US Specifications
Technical data & information: Apex tactical's fully machined sear for the smith & wesson m&p series has a different geometry from the factory part that dramatically reduces trigger pull weight to less than 5 lbs., while it also shortens overtravel and improves reset speed. The end result is much better trigger feel overall. Use the fully machined m&p sear as a standalone upgrade or in conjunction with an apex spring kit and ultimate striker block (both sold separately). The apex fully machined sear is available in two models: 1-dot fits all current-production m&p pistols in 9mm, .357 sig and .40 s&w. Does not fit m&p45 or shield models. 2-dot fits current-production m&p pis mfg: apex tactical specialties inc specs: hardened a2 tool steel, natural finish. US specification & reliable quality handgun sears by Apex. Part Nr: 100063.
More Details : click here
SEARCH this site : click here
|
|
|
Cylinder & Slide 1911 Tactical Sear Ss US Specifications
USD 40.99
(Indicative price - actual current price possibly lower)
Handgun Sears US Specifications
Technical data & information: Specifically designed for durability and extra-long service life. Edm, wire cut, then cnc, finish machined from a-2 tool steel and hardened to rc 48-52 so they hold a finely-stoned edge for thousands and thousands of rounds without failure. Pre-prepped hooks and sear face require only final stoning to achieve a clean, crisp trigger pull. Plus, the sear features the proper relief cut so the hammer resets firmly during cycling. All parts checked for proper hardness. Mfg: cylinder & slide specs: a-2 tool steel, in-the-white or stainless steel, rc 48-52. US specification & reliable quality handgun sears by Cylinder & Slide. Part Nr: CS0183.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Ed Brown 1911 Perfection Sear US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
