Ed Brown 1911 Trigger Solid Trigger Short US Specifications
Handgun Triggers by Ed Brown
|
Technical data & information: Precision-machined, curved shoe with a finely serrated surface provides good feel and trigger control. Shoe height is slightly oversized for precise fitting. Stainless steel bow gives smooth, no-flex trigger movement. Overtravel stop screw prevents creep. Available with solid shoe in long or short length to let you choose the most comfortable length of pull. Drilled, 3-hole shoe provides an even lighter trigger pull; long length only. Mfg: ed brown specs: aluminum, silver anodized shoe; polished stainless steel bow. Shoe βό" (6.3mm) wide, 15⁄16" (23.8mm) high. Overall length measured from center of shoe to end of bow. Short 21⁄16" (5.2cm) oal. Long 2βό" (5.7cm) oal. Gunsmit. US specification & reliable quality handgun triggers by Ed Brown. Part Nr: 1001SHORT.
 Indicative Price: USD 20.99
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more high specification gun & shooting items : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Overwatch Precision Springfield Xd S Brz Trigger Red Shoe/Red Safety US Specifications
USD 92.55
(Indicative price - actual current price possibly lower)
Handgun Triggers US Specifications
Technical data & information: Overwatch precision's brz trigger is a drop-in replacement for your springfield armory xd-s factory trigger. Thanks to its hybrid flat/curved trigger face, the brz trigger gives you a comfortable straight rearward press that brz calls "self-correcting" because it keeps your finger properly aligned to prevent jerking the trigger or pulling too much in one direction, causing flyers and overly large groups. Pre-travel on the brz xd-s trigger is reduced as much as possible without compromising firearm safety, resulting in a clean, sharp break, followed by short overtravel and a satisfying tactile reset. Light & strong machined 7075 t6 aluminum alloy dura mfg: overwatch precision. US specification & reliable quality handgun triggers by Overwatch. Part Nr: 57066.
More Details : click here
SEARCH this site : click here
|
|
|
Power Custom Colt/Ruger Single Action Revolver Triggers Colt Saa Trigger US Specifications
USD 38.99
(Indicative price - actual current price possibly lower)
Handgun Triggers US Specifications
Technical data & information: Machined steel replacement for factory trigger has extra metal in the right places to resist breakage. Sear contact surface and other contact areas are oversized to allow gunsmith fitting for a tight action, smooth pull, and crisp letoff. Uses existing sear and spring. Constructed of heat-treated carbon steel, blued finish. Models available for colt single action army and older, three-screw ruger revolvers. Mfg: power custom specs: heat-treated steel, blued. Gunsmith fitting required. Colt fits colt single action army and clones, including uberti, emf, and armi san marco. Ruger fits old model (three screw) blackhawk, super blackhawk, and single six revolvers (does not fit bearcat). US specification & reliable quality handgun triggers by Power. Part Nr: 713-000-084.
More Details : click here
SEARCH this site : click here
|
|
|
Apex Tactical Specialties Inc S&W Shield Action Enhancement Trigger Blue US Specifications
USD 75.52
(Indicative price - actual current price possibly lower)
Handgun Triggers US Specifications
Technical data & information: The trigger reduces trigger pre-travel and over-travel by approximately 20%. It features a flat face with a center mounted pivoting safety. The center mounted pivoting safety bar prevents unintended operation by creating a trigger block that will not disengage unless the shooter places their finger directly on the trigger face. The flat, smooth face trigger causes the shooter to place their finger on the center line of the trigger and encourages trigger manipulation directly in line with the bore axis. The shield action enhancement trigger is perfect for use with the m&p shield already equipped with the apex shield carry kit. Mfg: apex tactical specialties inc. US specification & reliable quality handgun triggers by Apex. Part Nr: 100137.
More Details : click here
SEARCH this site : click here
|
|
|
Wilson Combat 1911 Ultralight Match Trigger Solid Curved Ultralight Match Trigger Medium US Specifications
USD 33.99
(Indicative price - actual current price possibly lower)
Handgun Triggers US Specifications
Technical data & information: The same high-quality match-grade trigger used by the wilson custom shop in its famous custom 1911 autos. Weighs a mere .2 oz. (6g) to help ensure a consistent trigger pull and ultra-crisp letoff for competition or tactical pistols. Solid shoe is precision machined from high-grade aluminum alloy, with clean, well-defined serrations on the face for positive finger contact and neatly radiused edges that won't abrade finger; attractive, low-luster finish. Three-hole skeletonized model has long shoe with curved face; solid model available with curved face in short, medium, and long lengths or flat face. Customize overtravel to your pistol with the adjustable overtravel screw (hex wrench mfg: wilson combat specs: aluminum shoe, stainless steel stirrup, natural finish. US specification & reliable quality handgun triggers by Wilson. Part Nr: 190M.
More Details : click here
SEARCH this site : click here
|
|
|
Powder River Precision Inc Xd/Xdm Drop In Trigger Kits Xd 45 Drop In Trigger Kit US Specifications
USD 105.99
(Indicative price - actual current price possibly lower)
Handgun Triggers US Specifications
Technical data & information: The powder river precision xd/xdm drop in trigger kit contains their famous striker safety lever, which removes the long trigger pre-travel on xd triggers. The kit includes reduced power; trigger spring, sear spring, striker safety spring, and striker spring. These reduced power springs allow for a lowered pull weight. The prp drop in trigger is constructed of lightweight polymer that assists in speeding up trigger reset. It also has an integral over travel stop on the back of the trigger. This integral stop removes added stress on the trigger bar that is present with other over travel stop methods. When installed, this kit provides a short, crisp trigger pull (3.5-4.5lbs) with a fast re mfg: powder river precision inc specs: polymer trigger. Reduced power trigger, striker and strike springs. 3.5-4.5lbs pull weight. Note: the xd sub compact (100-009-750) is for 9mm/.40 only. Does not fit xds. Use 100-009-749 for all the xd .45 models except the .45 cal thumb safety model. US specification & reliable quality handgun triggers by Powder River. Part Nr: PRP05745.
More Details : click here
SEARCH this site : click here
|
|
|
Harrison Design & Consulting 1911 Extreme Service Trigger Short 1911 Trigger Black US Specifications
USD 45.99
(Indicative price - actual current price possibly lower)
Handgun Triggers US Specifications
Technical data & information: High-performance trigger is built for shooters who run their guns hard, yet want a precise, smooth, consistent trigger pull. Solid aluminum shoe gives a comfortable, natural finger position to help prevent uneven pressure that can compromise accuracy. Smooth, curved face with radiused edges won't abrade the finger, and a choice of shoe lengths lets you set a length of pull that concentrates the pull force on the centerline of the trigger. Shoe is permanently staked to a non-flex bow of hardened stainless steel with a mirror-polished surface that eliminates friction with the frame. Fixed, internal overtravel stop lets you set the precise amount of overtravel when you install the trigge mfg: harrison design & consulting specs: stainless steel bow, aluminum shoe, natural silver or black ionbond dlc finish. Shoe is .25" (6.4mm) wide. Length measured from middle of curve in shoe face to back of bow. 1911 short: 2.1" (5.3cm) long. Medium: 2.2" (5.6cm) long. Long: 2.25" (5.7cm) long. US specification & reliable quality handgun triggers by Harrison. Part Nr: HD101B.
More Details : click here
SEARCH this site : click here
|
|
|
Power Custom Ruger Bisley Hammer & Vaquero Trigger Hammer/Vaquero Trigger Kit Blue US Specifications
USD 175.99
(Indicative price - actual current price possibly lower)
Handgun Triggers US Specifications
Technical data & information: Cnc machined hammer and trigger reduce pull weight to an easy-breaking 2β½ to 3 pounds. Smoothly contoured trigger face gives a lighter feel. Half-cock notch provides an additional click when cocking, located so chambers will line up with loading gate. Allows cylinder to rotate without opening loading gate. Raised boss around hammer pivot hole eliminates side play; honed and polished engagement surfaces provide consistent trigger release. Requires no modification to grip frame. Hammers provide a drop-in fit only when used with power custom trigger. Requires gunsmith fitting/alteration to factory trigger. Factory ruger-style, bisley, and colt-style hammers available depen mfg: power custom specs: fits new model blackhawk, super blackhawk, and large frame vaquero with no modifications. US specification & reliable quality handgun triggers by Power. Part Nr: 713-000-045.
More Details : click here
SEARCH this site : click here
|
|
|
Glock Trigger W/Trigger Bar Gen5 Trigger W/Trigger Bar G17/G19 9mm Gen 5 Smooth US Specifications
USD 13.99
(Indicative price - actual current price possibly lower)
Handgun Triggers US Specifications
Technical data & information: The glock gen5 trigger & trigger bar assembly is made to the exact specifications as the trigger that's in your pistol right now, so it's a drop-in replacement for a broken, bent, or otherwise worn out trigger. The gen5 trigger & trigger bar assembly attaches to the trigger housing using a cruciform similar to the g42/g43 trigger, meaning it offers the same quick break after a pull with minimal creep. Rounding out the upgrades, glock's gen5 trigger & trigger bar assembly has the slimmer gen5 trigger shoe that's more comfortable for many shooters. Gen5 trigger pin (#100-026-268) and gen5 trigger housing / ejector assembly (#100-026-26 mfg: glock. US specification & reliable quality handgun triggers by Glock. Part Nr: 39702.
More Details : click here
SEARCH this site : click here
|
|
|
Apex Tactical Specialties Inc S&W Shield 45 Action Enhancement Trigger US Specifications
USD 73.1
(Indicative price - actual current price possibly lower)
Handgun Triggers US Specifications
Technical data & information: The apex m&p shield 45 action enhancement trigger replaces the factory trigger to you're your shield a shorter, more consistent pull with 20% less pre- and over-travel. Unlike the hinged, two-piece factory trigger apex's upgrade offers a solid, stable aluminum trigger shoe with a center-mounted pivoting safety that completely preserves the pistol's original safety values. With its flat face, the m&p shield 45 action enhancement trigger helps you shoot more accurately by keeping your finger centered on the trigger, directly in line with the bore axis, to minimize the risk of accuracy-robbing off-axis movement. Easy, drop-in installation replaces facto mfg: apex tactical specialties inc. US specification & reliable quality handgun triggers by Apex. Part Nr: 100160.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Ed Brown 1911 Trigger Solid Trigger Short US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
