Gun Cleaning Bore Brushes US Specifications
|
|
|
 Sinclair Nylon Rifle Brush 30 Cal US Specifications
USD 3.99
(Indicative price - actual current price possibly lower)
Technical data & information: Sinclair nylon bore brushes are manufactured significantly larger than bore diameter to fit your barrel properly and have a closed loop on the end. Many other brushes are undersized and don't do an adequate job of scrubbing the barrel. Our nylon bore brushes have extremely stiff, heavy bristles which provide excellent scrubbing action in your rifle's bore. Ammonia and oil based cleaners will not "eat" or dissolve these bristles as they do bronze brushes. The nylon pistol brushes are about 1" shorter than the rifle brushes. Brushes except 17 caliber and 20 caliber are standard 8-32 male thread. Mfg: sinclair international. US specification & reliable quality gun cleaning bore brushes by Sinclair. Part Nr: 1730.
More Details : click here
SEARCH this site : click here
|
|
|
Dewey Copper Eliminator Bore Brushes .22/.223/.224 Cal. 8 32 Male Thread 3 Pak US Specifications
USD 6.99
(Indicative price - actual current price possibly lower)
Technical data & information: Cleaning brushes have machined aluminum components that don't react with ammonia-based solvents like brass parts sometimes do. Won't produce blue-green stains on your patches that can be misinterpreted as "false positive" indications of copper fouling, so you'll know when your bore really is copper-free. Similar in hardness to brass, copper eliminator parts won't scratch the bore or damage the muzzle, and they'll stand up to hard use. Nylon bristles wound around an aluminum core and male-threaded aluminum coupling are completely brass-free to eliminate false-positive blue-green indications of copper fouling that can occur when using ammonia-based sol mfg: dewey specs: nylon bristles, aluminum core and ferrule. Thread patterns indicated in table. Sold in 3- and 12-paks. US specification & reliable quality gun cleaning bore brushes by Dewey. Part Nr: B22NA3PACK.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Standard Line Nylon Bore Brushes 3 20 Gauge Shotgun US Specifications
USD 6.99
(Indicative price - actual current price possibly lower)
Technical data & information: Since darn near as many bore brushes get used in the shop as get sold, we've packed these custom-made, top quality brushes in bulk paks to make them more convenient and less expensive. The shank is one-piece, looped and wound (not two, twisted together and chopped off). Nylon bore brush, new generation bore cleaners attack copper and bronze-based bullet jacket fouling aggressively and are just as hard on bronze cleaning brushes. Our nylon brushes stand up to these super cleaners and won't cause accuracy-ruining scratches. One-piece, looped and wound steel shanks (except black powder (bp) series, .17 caliber, and .20 caliber, which have brass shanks). Mfg: brownells specs: bristles: available in nylon. Shank: steel, looped and wound. Rifle: 3βό (8.3cm) oal, .17 and.20 caliber 5-40 threads, all others 8-32 thread. Pistol/revolver: 2-1⁄8 (5.4cm) oal, .17 caliber 5-40 thread, all others 8-32 thread. Shotgun: 2-7⁄8 (7.3cm) oal, 5⁄16". US specification & reliable quality gun cleaning bore brushes by Brownells. Part Nr: 084-420-319.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells "special Line" Dewey Thread Bore Brush Fits .338 Rifle Dozen US Specifications
USD 31.99
(Indicative price - actual current price possibly lower)
Technical data & information: Do away with the thread adapter; special line brushes thread right onto dewey coated rods. Eliminates the need to constantly change adapters; no more hunting for a misplaced adapter. Special line brushes have the best phosphor bronze wire bristles for long life and thorough cleaning. A one-piece, looped and wound, brass shank and coupler prevents any chance of putting a scratch in that all-important barrel. Mfg: brownells specs: bristles: phosphor bronze. Shank: brass, looped and wound. Rifle: 3β½ (8.5cm) oal. Pistol: 2-3⁄8 (6cm) oal. Calibers .22 to 6.5mm have 8-36 female threads. Calibers .270 to .50bmg have 12-28 female threads. US specification & reliable quality gun cleaning bore brushes by Brownells. Part Nr: 084-419-033.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Standard Line Stainless Steel Bore Brushes 3 S/S 20 Gauge Shotgun US Specifications
USD 9.99
(Indicative price - actual current price possibly lower)
Technical data & information: Since darn near as many bore brushes get used in the shop as get sold, we've packed these custom-made, top quality brushes in bulk paks to make them more convenient and less expensive. The shank is one-piece, looped and wound (not two, twisted together and chopped off). Stainless steel bore brush, for severely leaded, fouled or rusted bores, the aggressive cleaning action of a stainless steel brush can help get them clean. However, the aggressive action accelerates wear, and regular use can shorten barrel life. .54 bp rifle, 10-32 thread, for use with dewey large-bore coated rods. Mfg: brownells specs: bristles: available in stainless steel. Shank: steel, looped and wound. Rifle: 3 (8.3cm) oal, .17 and.20 cal. 5-40 threads, all others 8-32 thread. Pistol/revolver: 2-1⁄8 (5.4cm) oal, .17 cal. 5-40 thread, all others 8-32 thread. Shotgun: 2-7⁄8 (7.3cm) oal, 5⁄16"-27 thread. US specification & reliable quality gun cleaning bore brushes by Brownells. Part Nr: 084-413-020.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells "special Line" Brass Core Bore Brush .475/.480 Revolver Per 3 US Specifications
USD 6.99
(Indicative price - actual current price possibly lower)
Technical data & information: If you or your customer has one of those guns that drives tacks or knocks down birds every time, the slight extra cost of our special line brushes is well worth it to eliminate any chance of the cleaning brush's shank putting a scratch in that all-important barrel. The brass shank is one-piece, looped and wound, (not two, twisted together and chopped off). The coupling is no-scratch brass. The bristles are the best, phosphor, bronze scrubbing wire for long life and thorough cleaning. Mfg: brownells specs: bristles: phosphor bronze. Shank: brass, looped and wound. Rifle: 3" (8.3cm) oal except .17 cal., which is 2" (5.1cm) oal, .17 and .20 cal. 5-40 threads, all other 8-32 thread. Pistol/revolver: 2-1/8" (5.4cm) oal, .17 cal. 5-40 thread, all others 8-32 thread. Shotgun: 2-7/8" (7.3cm) oal, 5/1. US specification & reliable quality gun cleaning bore brushes by Brownells. Part Nr: 084-405-480.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells "special Line" Dewey Thread Bore Brush Fits 6.5mm Rifle Dozen US Specifications
USD 24.99
(Indicative price - actual current price possibly lower)
Technical data & information: Do away with the thread adapter; special line brushes thread right onto dewey coated rods. Eliminates the need to constantly change adapters; no more hunting for a misplaced adapter. Special line brushes have the best phosphor bronze wire bristles for long life and thorough cleaning. A one-piece, looped and wound, brass shank and coupler prevents any chance of putting a scratch in that all-important barrel. Mfg: brownells specs: bristles: phosphor bronze. Shank: brass, looped and wound. Rifle: 3β½ (8.5cm) oal. Pistol: 2-3⁄8 (6cm) oal. Calibers .22 to 6.5mm have 8-36 female threads. Calibers .270 to .50bmg have 12-28 female threads. US specification & reliable quality gun cleaning bore brushes by Brownells. Part Nr: 084-418-066.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Standard Line Stainless Steel Bore Brushes 1 Dozen S/S .270 Rifle US Specifications
USD 35.99
(Indicative price - actual current price possibly lower)
Technical data & information: Since darn near as many bore brushes get used in the shop as get sold, we've packed these custom-made, top quality brushes in bulk paks to make them more convenient and less expensive. The shank is one-piece, looped and wound (not two, twisted together and chopped off). Stainless steel bore brush, for severely leaded, fouled or rusted bores, the aggressive cleaning action of a stainless steel brush can help get them clean. However, the aggressive action accelerates wear, and regular use can shorten barrel life. .54 bp rifle, 10-32 thread, for use with dewey large-bore coated rods. Mfg: brownells specs: bristles: available in stainless steel. Shank: steel, looped and wound. Rifle: 3 (8.3cm) oal, .17 and.20 cal. 5-40 threads, all others 8-32 thread. Pistol/revolver: 2-1⁄8 (5.4cm) oal, .17 cal. 5-40 thread, all others 8-32 thread. Shotgun: 2-7⁄8 (7.3cm) oal, 5⁄16"-27 thread. US specification & reliable quality gun cleaning bore brushes by Brownells. Part Nr: 084-411-027.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Standard Line Stainless Steel Bore Brushes 1 Dozen S/S .38/.357/9mm Pistol US Specifications
USD 35.99
(Indicative price - actual current price possibly lower)
Technical data & information: Since darn near as many bore brushes get used in the shop as get sold, we've packed these custom-made, top quality brushes in bulk paks to make them more convenient and less expensive. The shank is one-piece, looped and wound (not two, twisted together and chopped off). Stainless steel bore brush, for severely leaded, fouled or rusted bores, the aggressive cleaning action of a stainless steel brush can help get them clean. However, the aggressive action accelerates wear, and regular use can shorten barrel life. .54 bp rifle, 10-32 thread, for use with dewey large-bore coated rods. Mfg: brownells specs: bristles: available in stainless steel. Shank: steel, looped and wound. Rifle: 3 (8.3cm) oal, .17 and.20 cal. 5-40 threads, all others 8-32 thread. Pistol/revolver: 2-1⁄8 (5.4cm) oal, .17 cal. 5-40 thread, all others 8-32 thread. Shotgun: 2-7⁄8 (7.3cm) oal, 5⁄16"-27 thread. US specification & reliable quality gun cleaning bore brushes by Brownells. Part Nr: 084-411-138.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Standard Line Stainless Steel Bore Brushes 1 Dozen S/S .50 Pistol US Specifications
USD 8.99
(Indicative price - actual current price possibly lower)
Technical data & information: Since darn near as many bore brushes get used in the shop as get sold, we've packed these custom-made, top quality brushes in bulk paks to make them more convenient and less expensive. The shank is one-piece, looped and wound (not two, twisted together and chopped off). Stainless steel bore brush, for severely leaded, fouled or rusted bores, the aggressive cleaning action of a stainless steel brush can help get them clean. However, the aggressive action accelerates wear, and regular use can shorten barrel life. .54 bp rifle, 10-32 thread, for use with dewey large-bore coated rods. Mfg: brownells specs: bristles: available in stainless steel. Shank: steel, looped and wound. Rifle: 3 (8.3cm) oal, .17 and.20 cal. 5-40 threads, all others 8-32 thread. Pistol/revolver: 2-1⁄8 (5.4cm) oal, .17 cal. 5-40 thread, all others 8-32 thread. Shotgun: 2-7⁄8 (7.3cm) oal, 5⁄16"-27 thread. US specification & reliable quality gun cleaning bore brushes by Brownells. Part Nr: 084-411-052.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells "special Line" Brass Core Bore Brush 20 Gauge Shotgun Per Dozen US Specifications
USD 22.99
(Indicative price - actual current price possibly lower)
Technical data & information: If you or your customer has one of those guns that drives tacks or knocks down birds every time, the slight extra cost of our special line brushes is well worth it to eliminate any chance of the cleaning brush's shank putting a scratch in that all-important barrel. The brass shank is one-piece, looped and wound, (not two, twisted together and chopped off). The coupling is no-scratch brass. The bristles are the best, phosphor, bronze scrubbing wire for long life and thorough cleaning. Mfg: brownells specs: bristles: phosphor bronze. Shank: brass, looped and wound. Rifle: 3" (8.3cm) oal except .17 cal., which is 2" (5.1cm) oal, .17 and .20 cal. 5-40 threads, all other 8-32 thread. Pistol/revolver: 2-1/8" (5.4cm) oal, .17 cal. 5-40 thread, all others 8-32 thread. Shotgun: 2-7/8" (7.3cm) oal, 5/1. US specification & reliable quality gun cleaning bore brushes by Brownells. Part Nr: 084-406-320.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Double Tuff Bore Brush Fits .22 Rimfire Rifle Dozen US Specifications
USD 27.99
(Indicative price - actual current price possibly lower)
Technical data & information: Extra-thick, kinked, phosphor bronze wire gives the hard scrubbing action needed to cut through the toughest crud in pistol bores. You'll have to push like the dickens, but the results will be well worth it. Mfg: brownells specs: bristles: extra-thick phosphor bronze. Shank: steel, looped and wound. Rifle: 3βό" (8.3cm) oal, 8-32 thread. Rifle: .54 & .58 have a 10-32 thread. Pistol: 2-3/8" (6cm) oal, 8-32 thread. Shotgun: 2-7/8" (7.3cm) oal, 5/16"-27 thread. US specification & reliable quality gun cleaning bore brushes by Brownells. Part Nr: 084-144-023.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Standard Line Nylon Bore Brushes 1 Dozen .30 Rifle US Specifications
USD 19.99
(Indicative price - actual current price possibly lower)
Technical data & information: Since darn near as many bore brushes get used in the shop as get sold, we've packed these custom-made, top quality brushes in bulk paks to make them more convenient and less expensive. The shank is one-piece, looped and wound (not two, twisted together and chopped off). Nylon bore brush, new generation bore cleaners attack copper and bronze-based bullet jacket fouling aggressively and are just as hard on bronze cleaning brushes. Our nylon brushes stand up to these super cleaners and won't cause accuracy-ruining scratches. One-piece, looped and wound steel shanks (except black powder (bp) series, .17 caliber, and .20 caliber, which have brass shanks). Mfg: brownells specs: bristles: available in nylon. Shank: steel, looped and wound. Rifle: 3βό (8.3cm) oal, .17 and.20 caliber 5-40 threads, all others 8-32 thread. Pistol/revolver: 2-1⁄8 (5.4cm) oal, .17 caliber 5-40 thread, all others 8-32 thread. Shotgun: 2-7⁄8 (7.3cm) oal, 5⁄16". US specification & reliable quality gun cleaning bore brushes by Brownells. Part Nr: 150550.
More Details : click here
SEARCH this site : click here
|
|
|
Iosso Nyflex Shotgun Bore Brushes Iosso Shotgun Brush .410ga US Specifications
USD 3.99
(Indicative price - actual current price possibly lower)
Technical data & information: Tough, long-lasting bore brushes thoroughly clean handguns, rifles and shotguns. Distinctive blue nyflex bristles flex more than bronze, letting you scrub back and forth without fear of getting the brush stuck in the bore. Easily scrubs out all types of fouling, and the brass wire brush core won't scratch the bore. Handgun and rifle brushes have 8-32 male threads, and shotgun brushes have 5⁄16-27 male threads. Sold as single brushes. Mfg: iosso products. US specification & reliable quality gun cleaning bore brushes by Iosso. Part Nr: 190016.
More Details : click here
SEARCH this site : click here
|
|
|
Otis Bore Brushes Brass Bore Brushes 10 Pak Fits .270/.284/6.8mm/7mm US Specifications
USD 12.99
(Indicative price - actual current price possibly lower)
Technical data & information: Hard-scrubbing brushes strip fouling quickly, leaving the bore sparkling clean. Premium-quality phosphor bronze bristles have twice the fill and a much longer life than generic brushes, with bristles all the way to the tip. More bristles mean fast, thorough cleaning. Stem is cold welded to the looped-and-wound brass core to withstand up to 200 lbs. Of pull force without separating. All models are threaded to fit standard 8-32 rods and precision machined to ensure a clean starter thread so the brush screws on the rod easily. Caliber stamped on the stem, so you can be sure you always have the correct-size brush for your gun. Some calibers available with nylon bristles for jobs requiring less a mfg: otis specs: brass wire shank, bronze or nylon bristles. Approximately 21⁄8" (5.4cm) long. Standard 8-32 tpi threads. Pistol/rifle brushes sold in 10 paks, each brush in individual plastic tube. US specification & reliable quality gun cleaning bore brushes by Otis. Part Nr: FG327BP.
More Details : click here
SEARCH this site : click here
|
|
|
Dewey Copper Eliminator Bore Brushes .30/.308/8mm 8 32 Male Thread 12 Pak US Specifications
USD 23.99
(Indicative price - actual current price possibly lower)
Technical data & information: Cleaning brushes have machined aluminum components that don't react with ammonia-based solvents like brass parts sometimes do. Won't produce blue-green stains on your patches that can be misinterpreted as "false positive" indications of copper fouling, so you'll know when your bore really is copper-free. Similar in hardness to brass, copper eliminator parts won't scratch the bore or damage the muzzle, and they'll stand up to hard use. Nylon bristles wound around an aluminum core and male-threaded aluminum coupling are completely brass-free to eliminate false-positive blue-green indications of copper fouling that can occur when using ammonia-based sol mfg: dewey specs: nylon bristles, aluminum core and ferrule. Thread patterns indicated in table. Sold in 3- and 12-paks. US specification & reliable quality gun cleaning bore brushes by Dewey. Part Nr: B30NA.
More Details : click here
SEARCH this site : click here
|
|
|
Sinclair Nylon Pistol Brushes 44/45 Cal US Specifications
USD 3.99
(Indicative price - actual current price possibly lower)
Technical data & information: Sinclair bronze and nylon bore brushes are manufactured significantly larger than bore diameter to fit your barrel properly and have a closed loop on the end. Many other brushes are undersized and don't do an adequate job of scrubbing the barrel. Our nylon bore brushes have extremely stiff, heavy bristles which provide excellent scrubbing action in your rifles bore. Ammonia and oil based cleaners will not "eat" or dissolve these bristles as they do bronze brushes. The nylon pistol brushes are about 1" shorter than the rifle brushes. Brushes except 17 caliber and 20 caliber are standard 8-32 male thread. Mfg: sinclair international. US specification & reliable quality gun cleaning bore brushes by Sinclair. Part Nr: 01745P.
More Details : click here
SEARCH this site : click here
|
|
|
Dewey Copper Eliminator Bore Brushes 3 Packs .20 Cal Pistol/Rifle 5/40 Male US Specifications
USD 8.99
(Indicative price - actual current price possibly lower)
Technical data & information: These brushes feature stiff nylon bristles wrapped in an aluminum core and male-threaded coupling. The absence of brass in their construction eliminates the false positive indications of copper fouling that can occur when using ammonia-based solvents with brass core brushes plus, the nylon bristles are gentle on the rifling. .17 and .20 caliber brushes have 5-40 threads and can be used to get some of the benefits of the copper eliminator system with your existing small-caliber rod. The .22 caliber and larger brushes have 8-32 threads for use with most cleaning rods. Sold in 3 and 12 packs. Mfg: dewey. US specification & reliable quality gun cleaning bore brushes by Dewey. Part Nr: B20PNA3PACK.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Double Tuff Bore Brush Fits 8mm Rifle Dozen US Specifications
USD 27.99
(Indicative price - actual current price possibly lower)
Technical data & information: Extra-thick, kinked, phosphor bronze wire gives the hard scrubbing action needed to cut through the toughest crud in pistol bores. You'll have to push like the dickens, but the results will be well worth it. Mfg: brownells specs: bristles: extra-thick phosphor bronze. Shank: steel, looped and wound. Rifle: 3βό" (8.3cm) oal, 8-32 thread. Rifle: .54 & .58 have a 10-32 thread. Pistol: 2-3/8" (6cm) oal, 8-32 thread. Shotgun: 2-7/8" (7.3cm) oal, 5/16"-27 thread. US specification & reliable quality gun cleaning bore brushes by Brownells. Part Nr: 084-144-324.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Standard Line Nylon Bore Brushes 3 .44/.45 Rifle US Specifications
USD 5.99
(Indicative price - actual current price possibly lower)
Technical data & information: Since darn near as many bore brushes get used in the shop as get sold, we've packed these custom-made, top quality brushes in bulk paks to make them more convenient and less expensive. The shank is one-piece, looped and wound (not two, twisted together and chopped off). Nylon bore brush, new generation bore cleaners attack copper and bronze-based bullet jacket fouling aggressively and are just as hard on bronze cleaning brushes. Our nylon brushes stand up to these super cleaners and won't cause accuracy-ruining scratches. One-piece, looped and wound steel shanks (except black powder (bp) series, .17 caliber, and .20 caliber, which have brass shanks). Mfg: brownells specs: bristles: available in nylon. Shank: steel, looped and wound. Rifle: 3βό (8.3cm) oal, .17 and.20 caliber 5-40 threads, all others 8-32 thread. Pistol/revolver: 2-1⁄8 (5.4cm) oal, .17 caliber 5-40 thread, all others 8-32 thread. Shotgun: 2-7⁄8 (7.3cm) oal, 5⁄16". US specification & reliable quality gun cleaning bore brushes by Brownells. Part Nr: 084-420-044.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Standard Line Nylon Bore Brushes 3 .40/.41/10mm Pistol US Specifications
USD 5.99
(Indicative price - actual current price possibly lower)
Technical data & information: Since darn near as many bore brushes get used in the shop as get sold, we've packed these custom-made, top quality brushes in bulk paks to make them more convenient and less expensive. The shank is one-piece, looped and wound (not two, twisted together and chopped off). Nylon bore brush, new generation bore cleaners attack copper and bronze-based bullet jacket fouling aggressively and are just as hard on bronze cleaning brushes. Our nylon brushes stand up to these super cleaners and won't cause accuracy-ruining scratches. One-piece, looped and wound steel shanks (except black powder (bp) series, .17 caliber, and .20 caliber, which have brass shanks). Mfg: brownells specs: bristles: available in nylon. Shank: steel, looped and wound. Rifle: 3βό (8.3cm) oal, .17 and.20 caliber 5-40 threads, all others 8-32 thread. Pistol/revolver: 2-1⁄8 (5.4cm) oal, .17 caliber 5-40 thread, all others 8-32 thread. Shotgun: 2-7⁄8 (7.3cm) oal, 5⁄16". US specification & reliable quality gun cleaning bore brushes by Brownells. Part Nr: 084-420-140.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Standard Line Nylon Bore Brushes 3 .20 Caliber Rifle US Specifications
USD 5.99
(Indicative price - actual current price possibly lower)
Technical data & information: Since darn near as many bore brushes get used in the shop as get sold, we've packed these custom-made, top quality brushes in bulk paks to make them more convenient and less expensive. The shank is one-piece, looped and wound (not two, twisted together and chopped off). Nylon bore brush, new generation bore cleaners attack copper and bronze-based bullet jacket fouling aggressively and are just as hard on bronze cleaning brushes. Our nylon brushes stand up to these super cleaners and won't cause accuracy-ruining scratches. One-piece, looped and wound steel shanks (except black powder (bp) series, .17 caliber, and .20 caliber, which have brass shanks). Mfg: brownells specs: bristles: available in nylon. Shank: steel, looped and wound. Rifle: 3βό (8.3cm) oal, .17 and.20 caliber 5-40 threads, all others 8-32 thread. Pistol/revolver: 2-1⁄8 (5.4cm) oal, .17 caliber 5-40 thread, all others 8-32 thread. Shotgun: 2-7⁄8 (7.3cm) oal, 5⁄16". US specification & reliable quality gun cleaning bore brushes by Brownells. Part Nr: 084-404-020.
More Details : click here
SEARCH this site : click here
|
|
|
Sinclair Nylon Rifle Brush 6mm US Specifications
USD 3.99
(Indicative price - actual current price possibly lower)
Technical data & information: Sinclair nylon bore brushes are manufactured significantly larger than bore diameter to fit your barrel properly and have a closed loop on the end. Many other brushes are undersized and don't do an adequate job of scrubbing the barrel. Our nylon bore brushes have extremely stiff, heavy bristles which provide excellent scrubbing action in your rifle's bore. Ammonia and oil based cleaners will not "eat" or dissolve these bristles as they do bronze brushes. The nylon pistol brushes are about 1" shorter than the rifle brushes. Brushes except 17 caliber and 20 caliber are standard 8-32 male thread. Mfg: sinclair international. US specification & reliable quality gun cleaning bore brushes by Sinclair. Part Nr: B24N.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells "special Line" Brass Core Bore Brush .410 Gauge Shotgun Per 3 US Specifications
USD 7.99
(Indicative price - actual current price possibly lower)
Technical data & information: If you or your customer has one of those guns that drives tacks or knocks down birds every time, the slight extra cost of our special line brushes is well worth it to eliminate any chance of the cleaning brush's shank putting a scratch in that all-important barrel. The brass shank is one-piece, looped and wound, (not two, twisted together and chopped off). The coupling is no-scratch brass. The bristles are the best, phosphor, bronze scrubbing wire for long life and thorough cleaning. Mfg: brownells specs: bristles: phosphor bronze. Shank: brass, looped and wound. Rifle: 3" (8.3cm) oal except .17 cal., which is 2" (5.1cm) oal, .17 and .20 cal. 5-40 threads, all other 8-32 thread. Pistol/revolver: 2-1/8" (5.4cm) oal, .17 cal. 5-40 thread, all others 8-32 thread. Shotgun: 2-7/8" (7.3cm) oal, 5/1. US specification & reliable quality gun cleaning bore brushes by Brownells. Part Nr: 084-406-340.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Standard Line Stainless Steel Bore Brushes 1 Dozen S/S 12 Gauge Shotgun US Specifications
USD 29.99
(Indicative price - actual current price possibly lower)
Technical data & information: Since darn near as many bore brushes get used in the shop as get sold, we've packed these custom-made, top quality brushes in bulk paks to make them more convenient and less expensive. The shank is one-piece, looped and wound (not two, twisted together and chopped off). Stainless steel bore brush, for severely leaded, fouled or rusted bores, the aggressive cleaning action of a stainless steel brush can help get them clean. However, the aggressive action accelerates wear, and regular use can shorten barrel life. .54 bp rifle, 10-32 thread, for use with dewey large-bore coated rods. Mfg: brownells specs: bristles: available in stainless steel. Shank: steel, looped and wound. Rifle: 3 (8.3cm) oal, .17 and.20 cal. 5-40 threads, all others 8-32 thread. Pistol/revolver: 2-1⁄8 (5.4cm) oal, .17 cal. 5-40 thread, all others 8-32 thread. Shotgun: 2-7⁄8 (7.3cm) oal, 5⁄16"-27 thread. US specification & reliable quality gun cleaning bore brushes by Brownells. Part Nr: 084-413-113.
More Details : click here
SEARCH this site : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Gun Cleaning Bore Brushes US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
