Gunsmith Files US Specifications
| Page 2
|
|
|
 Apex Tool Group Round Files 3/16" Round File US Specifications
USD 6.99
(Indicative price - actual current price possibly lower)
Technical data & information: American pattern, smooth cut round files allow even, gradual metal removal for an outstanding finish. Available in several different diameters to handle a variety of jobs. Mfg: apex tool group specs: steel, round files. 7" (15cm) long x 1⁄8" (3.2cm) or 5⁄32" (3.9cm) dia.; 9" (15cm) long x 3⁄16" (4.7cm), 7⁄32" (5.5cm), or " (6.3cm) dia. US specification & reliable quality gunsmith files by Apex. Part Nr: 1765.
More Details : click here
SEARCH this site : click here
|
|
|
Apex Tool Group Mill Files Second Cut 8" (20.3cm) US Specifications
USD 13.99
(Indicative price - actual current price possibly lower)
Technical data & information: Made especially for draw-filing and finishing metals. Taper slightly in width, thickness stays the same over the entire length. Both edges are square. Single cut on sides and edges. Mfg: apex tool group specs: 6" (15.2cm), 19⁄32" (7.1mm) wide x 7⁄64" (2.8mm) thick. 8" (20.3cm), 25⁄32" (19.9mm) wide x 9⁄64" (3.6mm) thick. 10" (25.4cm), 31⁄32" (24.6mm) wide x 11⁄64" (4.4mm) thick. US specification & reliable quality gunsmith files by Apex. Part Nr: 8529.
More Details : click here
SEARCH this site : click here
|
|
|
Friedr. Dick Gmbh Screw Slot Files Screw Equalling File #4 .025 US Specifications
USD 47.99
(Indicative price - actual current price possibly lower)
Technical data & information: Making screw slots is a delicate operation and only the finest, most precise files will do. These are the ones! six sizes and two styles let you cut even the super-thin european slots. Doing the job right takes both a joint file that cuts only on the edges and won't widen the slot as it deepens, and an equalling file to clean up the slot sides and square the bottom. Available in matched, same-size pairs, 1 joint and 1 equalling. Plus, there's the master screw slot set with all twelve files to cover any slotting job. Individual files also available. Note: these files are very thin and easily bent or broken. Sorry, cannot guarantee. Mfg: friedr. Dick gmbh specs: 5-5/8" (14.3cm) long. Both joint and equalling files of the same no. Are the same thickness. Shipping weight 1/4 lb. US specification & reliable quality gunsmith files by Freed. Part Nr: 11180630.
More Details : click here
SEARCH this site : click here
|
|
|
Apex Tool Group American Pattern Hand Files Smooth Cut 8" US Specifications
USD 16.99
(Indicative price - actual current price possibly lower)
Technical data & information: One of the basic gun work files and an excellent, all purpose file for dressing, striking off, shaping and metal removing of all types. Parallel in width, taper slightly in thickness. Double-cut sides; one edge is single-cut, other is safe. Mfg: apex tool group specs: 8" (20.3cm) american, 25/32" (19.8mm) wide x 7/32" (5.6mm) thick. 10" (25.4cm) american, 31/32" (24.6mm) wide x βό" (6.3mm) thick. US specification & reliable quality gunsmith files by Apex. Part Nr: 5919.
More Details : click here
SEARCH this site : click here
|
|
|
Apex Tool Group Swiss Pattern Barrette Files 6" Barrette #0 Cut US Specifications
USD 37.99
(Indicative price - actual current price possibly lower)
Technical data & information: These beautiful little swiss pattern files are made especially for getting into tight places, coming exactly up to right angles, working over dovetails, slots and other precision filing. Flat side has double-cut teeth. Back and edges are safe (no teeth) with edges beveled back on 33β° angle. Taper from maximum width shown below to long point. Mfg: apex tool group specs: 4 (10.2cm), 1/2" (12.7mm) wide. #0 or #1 cut. 6" (15.2cm), 11/16" (17.5mm) wide. #0, #1 or #2 cut. Vkhilfef corresponds to swiss cut no. 1. US specification & reliable quality gunsmith files by Apex. Part Nr: 35061.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells 65Β° 1911 Dovetail Type Slot Sight Base Files #2 65Β° Sight Base File US Specifications
USD 39.99
(Indicative price - actual current price possibly lower)
Technical data & information: Designed especially for widening and final fitting after using our 65β° sight base cutter to cut the basic slot. Or, can open up a 60β° slot to proper 65β° angle if changing to a new sight design. Has true parallel cutting edges for precision filing, giving you full control over the angle of the dovetail. One cutting side only, with the other two sides safe, so you can widen or deepen sight slots safely without fear of changing the other dimensions. Mfg: brownells specs: 7" (17.8cm) long. .280" (7.1mm) wide. #1, medium, double-cut. #2, fine, single-cut. US specification & reliable quality gunsmith files by Brownells. Part Nr: LPTR005.
More Details : click here
SEARCH this site : click here
|
|
|
Apex Tool Group 1911 Fitting & Deburring File Set 1911 File Set US Specifications
USD 29.99
(Indicative price - actual current price possibly lower)
Technical data & information: Convenient set of five, round parallel files for deburring mag release hole, slide stop hole, and other frame pin holes to ensure precise fit and smooth function of your 1911. Also use to fit, shape, and blend beavertail grip safety to frame. American-pattern, single-cut files ensure gradual, even metal removal to help you maintain precise dimensions. Indispensable for any accurizing job. Mfg: apex tool group specs: hardened cutting steel. Round parallel files with approximately 6" (15.2cm) cutting surface, 2" (5.1cm) tang. Kit contains one each 1⁄8" (3.2mm), 5⁄32" (4mm), 3⁄16" (4.8mm), 7⁄32" (5.6mm), " (6.4mm) diameter. US specification & reliable quality gunsmith files by Apex. Part Nr: 191-000-002.
More Details : click here
SEARCH this site : click here
|
|
|
Friedr. Dick Gmbh Professional Gunsmith Needle File Set Professional Gunsmith Needle File Cut #3 Three Square US Specifications
USD 11.99
(Indicative price - actual current price possibly lower)
Technical data & information: Finest professional quality gunsmith needle files in set of 12 assorted shapes. Made of best materials to rigid quality standards. Cuts are deep and durable. Knurled handles for no-slip use or convenient lock-up in needle file handles shown below. Comes in heavy-duty, see-through, pocketed roll with snap closure. Protects files, yet gives immediate access to shape wanted. Sold in sets or singles. Mfg: friedr. Dick gmbh specs: set contains 1 each of the following shapes: barrette, hand, hand with round edges, warding, crochet, three square, square, half round, round, knife, slitting and crossing. Approx. 5-1/2" (14cm) overall length. Shank 2-3/8" (6cm) x 1/8" (3.2mm) dia. US specification & reliable quality gunsmith files by Freed. Part Nr: 21321430.
More Details : click here
SEARCH this site : click here
|
|
|
Friedr. Dick Gmbh Professional Gunsmith Needle File Set Professional Gunsmith Needle File Cut #3 Half Round US Specifications
USD 11.99
(Indicative price - actual current price possibly lower)
Technical data & information: Finest professional quality gunsmith needle files in set of 12 assorted shapes. Made of best materials to rigid quality standards. Cuts are deep and durable. Knurled handles for no-slip use or convenient lock-up in needle file handles shown below. Comes in heavy-duty, see-through, pocketed roll with snap closure. Protects files, yet gives immediate access to shape wanted. Sold in sets or singles. Mfg: friedr. Dick gmbh specs: set contains 1 each of the following shapes: barrette, hand, hand with round edges, warding, crochet, three square, square, half round, round, knife, slitting and crossing. Approx. 5-1/2" (14cm) overall length. Shank 2-3/8" (6cm) x 1/8" (3.2mm) dia. US specification & reliable quality gunsmith files by Freed. Part Nr: 21521430.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells 60Β° Dovetail Standard Slot Sight Base Files #2 60Β° Sight Base File US Specifications
USD 46.99
(Indicative price - actual current price possibly lower)
Technical data & information: Specially manufactured, true parallel, 3-square file with only one side cutting, other two sides safe. This means the file can be used to widen dovetail slots in gun barrels without danger of deepening the slot or damaging the edge not being worked on. Being a true parallel file, you have absolute control over the angle of the dovetail, impossible with other type files. Mfg: brownells specs: 7" (17.8cm) long. .284" (7.2mm) wide. #1, medium, double-cut. #2, fine, single-cut. US specification & reliable quality gunsmith files by Brownells. Part Nr: LPTR003.
More Details : click here
SEARCH this site : click here
|
|
|
Apex Tool Group Mill Files Second Cut 10" (25.4cm) US Specifications
USD 15.99
(Indicative price - actual current price possibly lower)
Technical data & information: Made especially for draw-filing and finishing metals. Taper slightly in width, thickness stays the same over the entire length. Both edges are square. Single cut on sides and edges. Mfg: apex tool group specs: 6" (15.2cm), 19⁄32" (7.1mm) wide x 7⁄64" (2.8mm) thick. 8" (20.3cm), 25⁄32" (19.9mm) wide x 9⁄64" (3.6mm) thick. 10" (25.4cm), 31⁄32" (24.6mm) wide x 11⁄64" (4.4mm) thick. US specification & reliable quality gunsmith files by Apex. Part Nr: 8673.
More Details : click here
SEARCH this site : click here
|
|
|
Apex Tool Group Round Files 1/8" Round File US Specifications
USD 7.99
(Indicative price - actual current price possibly lower)
Technical data & information: American pattern, smooth cut round files allow even, gradual metal removal for an outstanding finish. Available in several different diameters to handle a variety of jobs. Mfg: apex tool group specs: steel, round files. 7" (15cm) long x 1⁄8" (3.2cm) or 5⁄32" (3.9cm) dia.; 9" (15cm) long x 3⁄16" (4.7cm), 7⁄32" (5.5cm), or " (6.3cm) dia. US specification & reliable quality gunsmith files by Apex. Part Nr: 191-000-003.
More Details : click here
SEARCH this site : click here
|
|
|
Friedr. Dick Gmbh Screw Slot Files Screw File Pair #6 .040 US Specifications
USD 88.99
(Indicative price - actual current price possibly lower)
Technical data & information: Making screw slots is a delicate operation and only the finest, most precise files will do. These are the ones! six sizes and two styles let you cut even the super-thin european slots. Doing the job right takes both a joint file that cuts only on the edges and won't widen the slot as it deepens, and an equalling file to clean up the slot sides and square the bottom. Available in matched, same-size pairs, 1 joint and 1 equalling. Plus, there's the master screw slot set with all twelve files to cover any slotting job. Individual files also available. Note: these files are very thin and easily bent or broken. Sorry, cannot guarantee. Mfg: friedr. Dick gmbh specs: 5-5/8" (14.3cm) long. Both joint and equalling files of the same no. Are the same thickness. Shipping weight 1/4 lb. US specification & reliable quality gunsmith files by Freed. Part Nr: 249-110-394.
More Details : click here
SEARCH this site : click here
|
|
|
Apex Tool Group Mill Files Smooth Cut 6" (15.2cm) US Specifications
USD 12.99
(Indicative price - actual current price possibly lower)
Technical data & information: Made especially for draw-filing and finishing metals. Taper slightly in width, thickness stays the same over the entire length. Both edges are square. Single cut on sides and edges. Mfg: apex tool group specs: 6" (15.2cm), 19⁄32" (7.1mm) wide x 7⁄64" (2.8mm) thick. 8" (20.3cm), 25⁄32" (19.9mm) wide x 9⁄64" (3.6mm) thick. 10" (25.4cm), 31⁄32" (24.6mm) wide x 11⁄64" (4.4mm) thick. US specification & reliable quality gunsmith files by Apex. Part Nr: 8416.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells File Starter Set US Specifications
USD 399.99
(Indicative price - actual current price possibly lower)
Technical data & information: From sight installation to action refinishing, these are the files, cleaning and storage accessories you need. Combined into one money saving kit are: 19 files, 5 handles, a 6 pack of file chalk, and a cleaning brush. Mfg: brownells specs: kit includes: 1 fine needle file set; 60° sight base, fine cut; 4" barrette, # 1 cut; 8" β½" rd., smooth cut; 8" mill file, smooth cut; 8" hand, smooth cut; 6" pillar, #2 cut; 8" ex. Narrow pillar, #2 cut; 6 pk. File chalk, double-face file cleaner, 3 needle file handles, 2. US specification & reliable quality gunsmith files by Brownells. Part Nr: 080-803-000.
More Details : click here
SEARCH this site : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Gunsmith Files US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
