Gunsmith Handgun Barrel Lug Tools US Specifications
|
|
|
 Brownells 1911 Lug Fitting Kit 1911 Slide Pusher US Specifications
USD 20.99
(Indicative price - actual current price possibly lower)
Technical data & information: Three essential tools work together to help you successfully fit oversized barrels. The barrel holder locks the barrel in the slide to let you cut the excess material on the lugs with the included, carbide barrel lug cutters. Plus, the slide pusher holds the slide forward to put a consistent pressure on the barrel while cutting. Comes in a convenient case. Mfg: brownells specs: barrel holder, steel. Approximately 3.5" (9cm) long .44" (1.1cm) o.D. Barrel lug cutter, carbide. .186" cutter and .195" cutter; includes handle. Slide pusher- steel shaft, plastic handle. 6.5" (16.5cm) long. US specification & reliable quality gunsmith handgun barrel lug tools by Brownells. Part Nr: 45SLIDEPUSHER.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells 1911 Lug Fitting Kit 1911 Lug Cutter Handle Only US Specifications
USD 21.99
(Indicative price - actual current price possibly lower)
Technical data & information: Three essential tools work together to help you successfully fit oversized barrels. The barrel holder locks the barrel in the slide to let you cut the excess material on the lugs with the included, carbide barrel lug cutters. Plus, the slide pusher holds the slide forward to put a consistent pressure on the barrel while cutting. Comes in a convenient case. Mfg: brownells specs: barrel holder, steel. Approximately 3.5" (9cm) long .44" (1.1cm) o.D. Barrel lug cutter, carbide. .186" cutter and .195" cutter; includes handle. Slide pusher- steel shaft, plastic handle. 6.5" (16.5cm) long. US specification & reliable quality gunsmith handgun barrel lug tools by Brownells. Part Nr: 080-000-058.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells 1911 Lug Fitting Kit .195" Cutter Only US Specifications
USD 57.99
(Indicative price - actual current price possibly lower)
Technical data & information: Three essential tools work together to help you successfully fit oversized barrels. The barrel holder locks the barrel in the slide to let you cut the excess material on the lugs with the included, carbide barrel lug cutters. Plus, the slide pusher holds the slide forward to put a consistent pressure on the barrel while cutting. Comes in a convenient case. Mfg: brownells specs: barrel holder, steel. Approximately 3.5" (9cm) long .44" (1.1cm) o.D. Barrel lug cutter, carbide. .186" cutter and .195" cutter; includes handle. Slide pusher- steel shaft, plastic handle. 6.5" (16.5cm) long. US specification & reliable quality gunsmith handgun barrel lug tools by Brownells. Part Nr: 080-000-063.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells 1911 Lug Fitting Kit .186" Cutter Only US Specifications
USD 53.99
(Indicative price - actual current price possibly lower)
Technical data & information: Three essential tools work together to help you successfully fit oversized barrels. The barrel holder locks the barrel in the slide to let you cut the excess material on the lugs with the included, carbide barrel lug cutters. Plus, the slide pusher holds the slide forward to put a consistent pressure on the barrel while cutting. Comes in a convenient case. Mfg: brownells specs: barrel holder, steel. Approximately 3.5" (9cm) long .44" (1.1cm) o.D. Barrel lug cutter, carbide. .186" cutter and .195" cutter; includes handle. Slide pusher- steel shaft, plastic handle. 6.5" (16.5cm) long. US specification & reliable quality gunsmith handgun barrel lug tools by Brownells. Part Nr: 080-000-062.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells 1911 Lug Cutter Handle & .186" Cutter US Specifications
USD 78.99
(Indicative price - actual current price possibly lower)
Technical data & information: Hand operated, carbide cutter easily trims excess material from the bottom barrel lug when fitting custom or factory barrels to 1911 autos. Cuts barrel lugs parallel, and with the correct height and radius, to help produce the best possible lockup. Use .186" cutter first, then progress to the .195" cutter if more material needs to be removed. Follow with careful hand fitting to achieve a firm, non-binding barrel-to-slide fit. Start small and check your work often. It is possible, with some slide/barrel combinations, that the .195" cutter could remove more material than necessary. Fits all 1911 auto, commander and officers acp, single- and double-stack frames. Mfg: brownells specs: 1" (2.5cm) diameter knob; 2.07" (5.25cm) long shank. .186" (4.72mm) or .195" (4.95mm) diameter cutters. Complete instructions included. US specification & reliable quality gunsmith handgun barrel lug tools by Brownells. Part Nr: 080-000-067.
More Details : click here
SEARCH this site : click here
|
|
|
|
Brownells 1911 Lug Cutter .195" Cutter Only US Specifications
USD 57.99
(Indicative price - actual current price possibly lower)
Technical data & information: Hand operated, carbide cutter easily trims excess material from the bottom barrel lug when fitting custom or factory barrels to 1911 autos. Cuts barrel lugs parallel, and with the correct height and radius, to help produce the best possible lockup. Use .186" cutter first, then progress to the .195" cutter if more material needs to be removed. Follow with careful hand fitting to achieve a firm, non-binding barrel-to-slide fit. Start small and check your work often. It is possible, with some slide/barrel combinations, that the .195" cutter could remove more material than necessary. Fits all 1911 auto, commander and officers acp, single- and double-stack frames. Mfg: brownells specs: 1" (2.5cm) diameter knob; 2.07" (5.25cm) long shank. .186" (4.72mm) or .195" (4.95mm) diameter cutters. Complete instructions included. US specification & reliable quality gunsmith handgun barrel lug tools by Brownells. Part Nr: 080-000-063.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells 1911 Barrel Locking Lug File US Specifications
USD 63.99
(Indicative price - actual current price possibly lower)
Technical data & information: Precision, surface-ground file deepens barrel locking lugs without increasing width. Safe on two sides to let the gunsmith file to a close fit with no chance of widening lug area. #2 cut, swiss pattern cuts smoothly; little or no additional stoning/polishing is needed. Mfg: brownells specs: 6" (15.2cm) long. .171" (4.35mm) square. US specification & reliable quality gunsmith handgun barrel lug tools by Brownells. Part Nr: 080-751-000.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells 1911 Lug Fitting Kit US Specifications
USD 179.99
(Indicative price - actual current price possibly lower)
Technical data & information: Three essential tools work together to help you successfully fit oversized barrels. The barrel holder locks the barrel in the slide to let you cut the excess material on the lugs with the included, carbide barrel lug cutters. Plus, the slide pusher holds the slide forward to put a consistent pressure on the barrel while cutting. Comes in a convenient case. Mfg: brownells specs: barrel holder, steel. Approximately 3.5" (9cm) long .44" (1.1cm) o.D. Barrel lug cutter, carbide. .186" cutter and .195" cutter; includes handle. Slide pusher- steel shaft, plastic handle. 6.5" (16.5cm) long. US specification & reliable quality gunsmith handgun barrel lug tools by Brownells. Part Nr: 080-000-089.
More Details : click here
SEARCH this site : click here
|
|
|
|
Brownells 1911 Lug Cutter .186" Cutter Only US Specifications
USD 53.99
(Indicative price - actual current price possibly lower)
Technical data & information: Hand operated, carbide cutter easily trims excess material from the bottom barrel lug when fitting custom or factory barrels to 1911 autos. Cuts barrel lugs parallel, and with the correct height and radius, to help produce the best possible lockup. Use .186" cutter first, then progress to the .195" cutter if more material needs to be removed. Follow with careful hand fitting to achieve a firm, non-binding barrel-to-slide fit. Start small and check your work often. It is possible, with some slide/barrel combinations, that the .195" cutter could remove more material than necessary. Fits all 1911 auto, commander and officers acp, single- and double-stack frames. Mfg: brownells specs: 1" (2.5cm) diameter knob; 2.07" (5.25cm) long shank. .186" (4.72mm) or .195" (4.95mm) diameter cutters. Complete instructions included. US specification & reliable quality gunsmith handgun barrel lug tools by Brownells. Part Nr: 080-000-062.
More Details : click here
SEARCH this site : click here
|
|
|
Egw 1911 Lock Up Gauge US Specifications
USD 32.99
(Indicative price - actual current price possibly lower)
Technical data & information: Aluminum gauge keeps barrel placement consistent during "mill and fit" procedure. Hole in gauge lets you place a dial indicator on barrel to make sure that it remains in proper alignment while you check for proper lock-up. Mfg: egw specs: aluminum, black. 3" (76mm) wide, 1" (25mm) high. Slots are .362" (9.1mm) and .368" (9.3mm). US specification & reliable quality gunsmith handgun barrel lug tools by EGW. Part Nr: 70210.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells 1911 Lug Cutter Handle & .195" Cutter US Specifications
USD 82.99
(Indicative price - actual current price possibly lower)
Technical data & information: Hand operated, carbide cutter easily trims excess material from the bottom barrel lug when fitting custom or factory barrels to 1911 autos. Cuts barrel lugs parallel, and with the correct height and radius, to help produce the best possible lockup. Use .186" cutter first, then progress to the .195" cutter if more material needs to be removed. Follow with careful hand fitting to achieve a firm, non-binding barrel-to-slide fit. Start small and check your work often. It is possible, with some slide/barrel combinations, that the .195" cutter could remove more material than necessary. Fits all 1911 auto, commander and officers acp, single- and double-stack frames. Mfg: brownells specs: 1" (2.5cm) diameter knob; 2.07" (5.25cm) long shank. .186" (4.72mm) or .195" (4.95mm) diameter cutters. Complete instructions included. US specification & reliable quality gunsmith handgun barrel lug tools by Brownells. Part Nr: 080-000-068.
More Details : click here
SEARCH this site : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Gunsmith Handgun Barrel Lug Tools US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
