Gunsmith Handgun Crane Tools US Specifications
|
|
|
 Brownells Yoke/Crane Alignment Tool #2 Yoke/Crane Alignment Tool US Specifications
USD 56.99
(Indicative price - actual current price possibly lower)
Technical data & information: Because both ruger and s&w's lock at the front and rear of the extractor rod, even a slightly bent one can cause difficulty in lockup and will impair smooth operation, especially for double-action shooting. These tools will enable the gunsmith to more easily and precisely align the crane in a matter of minutes without "guesswork". Precision ground and hardened to within .0005" on all critical dimensions to assure the ultimate in accuracy. Full instructions with each tool. Hardened to rc 52-54 to maintain exact specs. Mfg: brownells specs: j, 2.6" (6.6cm) long; k, 3.17" (8cm) long; ruger, 3.025" (7.6cm) long. #1 for s&w "j" frame (centerfire only); #2 for s&w "k", "l" or "n" frame; #3 for ruger speed-six and security six. Shorten knurled en. US specification & reliable quality gunsmith handgun crane tools by Brownells. Part Nr: 100130.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Crane Stretcher US Specifications
USD 35.99
(Indicative price - actual current price possibly lower)
Technical data & information: Swages a small groove in the rear of the crane/ yoke tube to remove excess cylinder play. Also swages the retaining groove in .22 magazine tubes. Mfg: brownells specs: 3" (9cm) long. Capacity; 1/8" (3.2mm), 5/8" (15.9mm). US specification & reliable quality gunsmith handgun crane tools by Brownells. Part Nr: 080-640-000.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Babbitt Bars Round Babbitt Bar US Specifications
USD 19.99
(Indicative price - actual current price possibly lower)
Technical data & information: Trapezoid and round shaped lead alloy bars give cushioned "hammer" blow for loosening side plate, correcting alignment. Mfg: brownells specs: round, 6" (15.2cm) long x 7/8" (22.2mm) dia. Trapezoid, 6" (15.2cm) long, 7/8" (22.2mm) thick, 15/16" (33.3cm) at base. US specification & reliable quality gunsmith handgun crane tools by Brownells. Part Nr: 084-172-001.
More Details : click here
SEARCH this site : click here
|
|
|
Power Custom Crane Ball Drilling Fixture For S&W Crane Ball & Spring Kit US Specifications
USD 29.99
(Indicative price - actual current price possibly lower)
Technical data & information: Adding a spring-loaded, locking ball in the cylinder crane is standard practice on smith & wesson k, l and n frame revolvers, especially when installing a bull barrel. Steel fixture holds the crane secure and in proper alignment for drilling; makes it virtually impossible to mislocate the hole or drill at the wrong angle. Comes complete with no. 30 drill bit, .125" diameter locking balls, springs, and staking punch. Mfg: power custom specs: drilling fixture, steel, blued finish. 1ß½" (3.8cm) long, 1" (2.5cm) wide, 2" (5.1cm) high. Includes no. 30 cobalt drill bit, (20) 302 ss locking balls, 20 springs, and staking punch. Designed for k, l and n frame yokes only. Crane ball & spring kit, contains 20. US specification & reliable quality gunsmith handgun crane tools by Power. Part Nr: PCBWPUNCH.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Yoke/Crane Alignment Tool #1 Yoke/Crane Alignment Tool US Specifications
USD 34.99
(Indicative price - actual current price possibly lower)
Technical data & information: Because both ruger and s&w's lock at the front and rear of the extractor rod, even a slightly bent one can cause difficulty in lockup and will impair smooth operation, especially for double-action shooting. These tools will enable the gunsmith to more easily and precisely align the crane in a matter of minutes without "guesswork". Precision ground and hardened to within .0005" on all critical dimensions to assure the ultimate in accuracy. Full instructions with each tool. Hardened to rc 52-54 to maintain exact specs. Mfg: brownells specs: j, 2.6" (6.6cm) long; k, 3.17" (8cm) long; ruger, 3.025" (7.6cm) long. #1 for s&w "j" frame (centerfire only); #2 for s&w "k", "l" or "n" frame; #3 for ruger speed-six and security six. Shorten knurled en. US specification & reliable quality gunsmith handgun crane tools by Brownells. Part Nr: 080-616-001.
More Details : click here
SEARCH this site : click here
|
|
|
Power Custom Crane Ball Drilling Fixture For S&W Crane Ball & Spring Refill US Specifications
USD 9.99
(Indicative price - actual current price possibly lower)
Technical data & information: Adding a spring-loaded, locking ball in the cylinder crane is standard practice on smith & wesson k, l and n frame revolvers, especially when installing a bull barrel. Steel fixture holds the crane secure and in proper alignment for drilling; makes it virtually impossible to mislocate the hole or drill at the wrong angle. Comes complete with no. 30 drill bit, .125" diameter locking balls, springs, and staking punch. Mfg: power custom specs: drilling fixture, steel, blued finish. 1ß½" (3.8cm) long, 1" (2.5cm) wide, 2" (5.1cm) high. Includes no. 30 cobalt drill bit, (20) 302 ss locking balls, 20 springs, and staking punch. Designed for k, l and n frame yokes only. Crane ball & spring kit, contains 20. US specification & reliable quality gunsmith handgun crane tools by Power. Part Nr: PCB.
More Details : click here
SEARCH this site : click here
|
|
|
Power Custom Crane Ball Drilling Fixture For S&W Crane Ball Drilling Fixture US Specifications
USD 103.99
(Indicative price - actual current price possibly lower)
Technical data & information: Adding a spring-loaded, locking ball in the cylinder crane is standard practice on smith & wesson k, l and n frame revolvers, especially when installing a bull barrel. Steel fixture holds the crane secure and in proper alignment for drilling; makes it virtually impossible to mislocate the hole or drill at the wrong angle. Comes complete with no. 30 drill bit, .125" diameter locking balls, springs, and staking punch. Mfg: power custom specs: drilling fixture, steel, blued finish. 1ß½" (3.8cm) long, 1" (2.5cm) wide, 2" (5.1cm) high. Includes no. 30 cobalt drill bit, (20) 302 ss locking balls, 20 springs, and staking punch. Designed for k, l and n frame yokes only. Crane ball & spring kit, contains 20. US specification & reliable quality gunsmith handgun crane tools by Power. Part Nr: CBLJ.
More Details : click here
SEARCH this site : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Gunsmith Handgun Crane Tools US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
