Gunsmith Handgun Stuck Case Removers US Specifications
|
|
|
 Brownells Squib Rod .32 Cal. US Specifications
USD 29.99
(Indicative price - actual current price possibly lower)
Technical data & information: Don't let a stuck bullet from a "squib" or weak load cut short a shooting session. Far superior to other rods or makeshift punches, this non-marring brass rod fits the bore closely, can't wedge between bullet nose and rifling. Each rod is drilled and tapped to thread onto a dewey cleaning rod; very handy for knocking stuck bullets out of rifle barrels. Mfg: brownells specs: kit contains one of each size rod and (2) 8-32 to 12-28 adapters. 8" (20.3cm) long. Brass. Pak has 2 rods of size listed and 2 dewey 30a rod adapters. US specification & reliable quality gunsmith handgun stuck case removers by Brownells. Part Nr: 084-175-032.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Broken Shell Extractor .223 Broken Shell Extractor US Specifications
USD 19.99
(Indicative price - actual current price possibly lower)
Technical data & information: Case head separation from over-fired or out of spec brass won't ruin your shooting experience if you keep one of these handy tools in your pocket or field kit. Hardened, steel tool reliably and easily removes broken cases from ar-type or any other firearm chambered for the .223/5.56 nato or .308/7.62 nato cartridges. Exclusive, threaded, two-piece design is adjustable for overall length, so the tool completely engages the rim of the case mouth; cannot slip through or strip out. Very simple to use, drop the broken shell extractor into the chamber directly inside the broken case. Allow the bolt to close so the extractor engages the rim of the tool and draw back the bolt to open the chamb mfg: brownells specs: steel, blue. Models for .223 remington/5.56 nato or .308 winchester/7.62 nato cartridges. US specification & reliable quality gunsmith handgun stuck case removers by Brownells. Part Nr: 080-000-441.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Stuck Case Puller Collet Only Fits .222 .223 Etc. US Specifications
USD 25.99
(Indicative price - actual current price possibly lower)
Technical data & information: Works when other pullers fail, even if the case rim is partially sheared away. Sturdy, steel collets tightly grip around the entire circumference of the case rim. Slide hammer uses straight-back inertia to safely remove stubborn, stuck cases. ?will not fit ar-15 and requires a .700 bolt diameter or larger to work. Mfg: brownells specs: steel, blued. 24" (60cm) long. 4 lb. (1.8kg) wt. Collets: available to fit .223, .30-'06, or magnum sized case heads. Complete tool: includes 1 collet, head, slide hammer, shaft and complete instructions. US specification & reliable quality gunsmith handgun stuck case removers by Brownells. Part Nr: 10008485.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Squib Rod 9mm .38 .357 Cal. US Specifications
USD 29.99
(Indicative price - actual current price possibly lower)
Technical data & information: Don't let a stuck bullet from a "squib" or weak load cut short a shooting session. Far superior to other rods or makeshift punches, this non-marring brass rod fits the bore closely, can't wedge between bullet nose and rifling. Each rod is drilled and tapped to thread onto a dewey cleaning rod; very handy for knocking stuck bullets out of rifle barrels. Mfg: brownells specs: kit contains one of each size rod and (2) 8-32 to 12-28 adapters. 8" (20.3cm) long. Brass. Pak has 2 rods of size listed and 2 dewey 30a rod adapters. US specification & reliable quality gunsmith handgun stuck case removers by Brownells. Part Nr: 9MMSQUIBROD.
More Details : click here
SEARCH this site : click here
|
|
|
Spd Tool Range Rod US Specifications
USD 22.99
(Indicative price - actual current price possibly lower)
Technical data & information: The range rod is a multi-tool for your range bag. This all in one tool works as a cleaning rod for 8-32 standard brushes, a barrel obstruction remover, a measuring scale for target groups, and a magnetic parts retriever with removeable tip. Mfg: spd tool llc. US specification & reliable quality gunsmith handgun stuck case removers by SPD. Part Nr: RRB.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Squib Rod .44 Cal. US Specifications
USD 29.99
(Indicative price - actual current price possibly lower)
Technical data & information: Don't let a stuck bullet from a "squib" or weak load cut short a shooting session. Far superior to other rods or makeshift punches, this non-marring brass rod fits the bore closely, can't wedge between bullet nose and rifling. Each rod is drilled and tapped to thread onto a dewey cleaning rod; very handy for knocking stuck bullets out of rifle barrels. Mfg: brownells specs: kit contains one of each size rod and (2) 8-32 to 12-28 adapters. 8" (20.3cm) long. Brass. Pak has 2 rods of size listed and 2 dewey 30a rod adapters. US specification & reliable quality gunsmith handgun stuck case removers by Brownells. Part Nr: 084-175-044.
More Details : click here
SEARCH this site : click here
|
|
|
C. J. Weapons Acc. Broken Shell Extractors 7.62 X 39 Broken Shell Extractor US Specifications
USD 9.99
(Indicative price - actual current price possibly lower)
Technical data & information: Don't let case head separation put an end to your day at the range or in the field. Simple, reliable tool quickly and easily removes a stuck case from the chamber. Make sure gun is unloaded, then insert the shell extractor in the chamber and close the action, just like you're loading another round. The back of the tool takes the place of the missing case head, while the springy steel fingers slide through the case neck and expand to positively grab the case mouth. Manually work the action to extract the broken shell and the tool. Carry one in your pocket when shooting as cheap insurance against having your range day or hunt cut short. Fits only the specified caliber. Mfg: c. J. Weapons acc. Specs: steel, blued. Models available for the calibers listed below. US specification & reliable quality gunsmith handgun stuck case removers by C. J.. Part Nr: 100-003-128.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Squib Rod 10mm .40 .41 Cal. US Specifications
USD 29.99
(Indicative price - actual current price possibly lower)
Technical data & information: Don't let a stuck bullet from a "squib" or weak load cut short a shooting session. Far superior to other rods or makeshift punches, this non-marring brass rod fits the bore closely, can't wedge between bullet nose and rifling. Each rod is drilled and tapped to thread onto a dewey cleaning rod; very handy for knocking stuck bullets out of rifle barrels. Mfg: brownells specs: kit contains one of each size rod and (2) 8-32 to 12-28 adapters. 8" (20.3cm) long. Brass. Pak has 2 rods of size listed and 2 dewey 30a rod adapters. US specification & reliable quality gunsmith handgun stuck case removers by Brownells. Part Nr: 10MMSQUIBROD.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Squib Rod Kit US Specifications
USD 85.99
(Indicative price - actual current price possibly lower)
Technical data & information: Don't let a stuck bullet from a "squib" or weak load cut short a shooting session. Far superior to other rods or makeshift punches, this non-marring brass rod fits the bore closely, can't wedge between bullet nose and rifling. Each rod is drilled and tapped to thread onto a dewey cleaning rod; very handy for knocking stuck bullets out of rifle barrels. Mfg: brownells specs: kit contains one of each size rod and (2) 8-32 to 12-28 adapters. 8" (20.3cm) long. Brass. Pak has 2 rods of size listed and 2 dewey 30a rod adapters. US specification & reliable quality gunsmith handgun stuck case removers by Brownells. Part Nr: 084-175-000.
More Details : click here
SEARCH this site : click here
|
|
|
C. J. Weapons Acc. Broken Shell Extractors .223/5.56mm Broken Shell Extractor US Specifications
USD 13.99
(Indicative price - actual current price possibly lower)
Technical data & information: Don't let case head separation put an end to your day at the range or in the field. Simple, reliable tool quickly and easily removes a stuck case from the chamber. Make sure gun is unloaded, then insert the shell extractor in the chamber and close the action, just like you're loading another round. The back of the tool takes the place of the missing case head, while the springy steel fingers slide through the case neck and expand to positively grab the case mouth. Manually work the action to extract the broken shell and the tool. Carry one in your pocket when shooting as cheap insurance against having your range day or hunt cut short. Fits only the specified caliber. Mfg: c. J. Weapons acc. Specs: steel, blued. Models available for the calibers listed below. US specification & reliable quality gunsmith handgun stuck case removers by C. J.. Part Nr: 100-005-992.
More Details : click here
SEARCH this site : click here
|
|
|
C. J. Weapons Acc. Broken Shell Extractors .30 Carbine Broken Shell Extractor US Specifications
USD 13.99
(Indicative price - actual current price possibly lower)
Technical data & information: Don't let case head separation put an end to your day at the range or in the field. Simple, reliable tool quickly and easily removes a stuck case from the chamber. Make sure gun is unloaded, then insert the shell extractor in the chamber and close the action, just like you're loading another round. The back of the tool takes the place of the missing case head, while the springy steel fingers slide through the case neck and expand to positively grab the case mouth. Manually work the action to extract the broken shell and the tool. Carry one in your pocket when shooting as cheap insurance against having your range day or hunt cut short. Fits only the specified caliber. Mfg: c. J. Weapons acc. Specs: steel, blued. Models available for the calibers listed below. US specification & reliable quality gunsmith handgun stuck case removers by C. J.. Part Nr: 100-005-993.
More Details : click here
SEARCH this site : click here
|
|
|
C. J. Weapons Acc. Broken Shell Extractors .300 Win. Mag. Broken Shell Extractor US Specifications
USD 11.99
(Indicative price - actual current price possibly lower)
Technical data & information: Don't let case head separation put an end to your day at the range or in the field. Simple, reliable tool quickly and easily removes a stuck case from the chamber. Make sure gun is unloaded, then insert the shell extractor in the chamber and close the action, just like you're loading another round. The back of the tool takes the place of the missing case head, while the springy steel fingers slide through the case neck and expand to positively grab the case mouth. Manually work the action to extract the broken shell and the tool. Carry one in your pocket when shooting as cheap insurance against having your range day or hunt cut short. Fits only the specified caliber. Mfg: c. J. Weapons acc. Specs: steel, blued. Models available for the calibers listed below. US specification & reliable quality gunsmith handgun stuck case removers by C. J.. Part Nr: 100-005-755.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Stuck Case Puller Collet Only Fits .30 .338 Mag Etc. US Specifications
USD 25.99
(Indicative price - actual current price possibly lower)
Technical data & information: Works when other pullers fail, even if the case rim is partially sheared away. Sturdy, steel collets tightly grip around the entire circumference of the case rim. Slide hammer uses straight-back inertia to safely remove stubborn, stuck cases. ?will not fit ar-15 and requires a .700 bolt diameter or larger to work. Mfg: brownells specs: steel, blued. 24" (60cm) long. 4 lb. (1.8kg) wt. Collets: available to fit .223, .30-'06, or magnum sized case heads. Complete tool: includes 1 collet, head, slide hammer, shaft and complete instructions. US specification & reliable quality gunsmith handgun stuck case removers by Brownells. Part Nr: 080-881-338.
More Details : click here
SEARCH this site : click here
|
|
|
C. J. Weapons Acc. Broken Shell Extractors .30 06 Broken Shell Extractor US Specifications
USD 13.99
(Indicative price - actual current price possibly lower)
Technical data & information: Don't let case head separation put an end to your day at the range or in the field. Simple, reliable tool quickly and easily removes a stuck case from the chamber. Make sure gun is unloaded, then insert the shell extractor in the chamber and close the action, just like you're loading another round. The back of the tool takes the place of the missing case head, while the springy steel fingers slide through the case neck and expand to positively grab the case mouth. Manually work the action to extract the broken shell and the tool. Carry one in your pocket when shooting as cheap insurance against having your range day or hunt cut short. Fits only the specified caliber. Mfg: c. J. Weapons acc. Specs: steel, blued. Models available for the calibers listed below. US specification & reliable quality gunsmith handgun stuck case removers by C. J.. Part Nr: 100-003-127.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Broken Shell Extractor .308 Broken Shell Extractor US Specifications
USD 22.99
(Indicative price - actual current price possibly lower)
Technical data & information: Case head separation from over-fired or out of spec brass won't ruin your shooting experience if you keep one of these handy tools in your pocket or field kit. Hardened, steel tool reliably and easily removes broken cases from ar-type or any other firearm chambered for the .223/5.56 nato or .308/7.62 nato cartridges. Exclusive, threaded, two-piece design is adjustable for overall length, so the tool completely engages the rim of the case mouth; cannot slip through or strip out. Very simple to use, drop the broken shell extractor into the chamber directly inside the broken case. Allow the bolt to close so the extractor engages the rim of the tool and draw back the bolt to open the chamb mfg: brownells specs: steel, blue. Models for .223 remington/5.56 nato or .308 winchester/7.62 nato cartridges. US specification & reliable quality gunsmith handgun stuck case removers by Brownells. Part Nr: 080-000-530.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Squib Rod .45 Cal. US Specifications
USD 29.99
(Indicative price - actual current price possibly lower)
Technical data & information: Don't let a stuck bullet from a "squib" or weak load cut short a shooting session. Far superior to other rods or makeshift punches, this non-marring brass rod fits the bore closely, can't wedge between bullet nose and rifling. Each rod is drilled and tapped to thread onto a dewey cleaning rod; very handy for knocking stuck bullets out of rifle barrels. Mfg: brownells specs: kit contains one of each size rod and (2) 8-32 to 12-28 adapters. 8" (20.3cm) long. Brass. Pak has 2 rods of size listed and 2 dewey 30a rod adapters. US specification & reliable quality gunsmith handgun stuck case removers by Brownells. Part Nr: 45SQUIBROD.
More Details : click here
SEARCH this site : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Gunsmith Handgun Stuck Case Removers US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
