Gunsmith Metal Stock US Specifications
|
|
|
 Brownells Oil Hardening Drill Rod Round 1" Gauge 1.000 Dec. Equiv. US Specifications
USD 49.99
(Indicative price - actual current price possibly lower)
Technical data & information: O-1 oil hardening drill rod round carbon, .95% manganese, 1.20% silicon, .25% for βό" round and larger, we carry oil hardening drill rod rather than water hardening. The o-1 in this size range is characterized by good machineability, smooth finish as well as superior dimensional stability and excellent hardening characteristics. We recommend it for use in dies, tools, parts, and punches. Excellent for general use in the shop. Hardening: heat slowly to 1475β° f., 1525β° f. If a controlled furnace is not available, use 1500β° tempilaq. Hold at this temperature for a few seconds then quench in a light quenching oil. Temperi mfg: brownells specs: rods are 18" in length. US specification & reliable quality gunsmith metal stock by Brownells. Part Nr: 80541100.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Water Hardening Drill Rod #8 Gauge .1970 Dec. Equiv. Round US Specifications
USD 4.99
(Indicative price - actual current price possibly lower)
Technical data & information: One of the remarkable features of these tool steels is the low draw temperature to achieve maximum torsion impact strength. Most drawing can be done in a kitchen oven! or you can easily make a small and efficient draw furnace on your bench using furnace brick, a simple heat element and a kitchen oven heat control. Draw all steel shown one hour.W-1 water hardening drill rodcarbon, 1.00% manganese, .40% silicon, .20% a fine-grained, commercial quality steel, w-1 can be used for tools, parts, dies or punches which require great hardness and a tough inner core for maximum strength. The sizes we carry should meet 99% of all requirements for pins in guns mfg: brownells specs: rods are 18" in length. US specification & reliable quality gunsmith metal stock by Brownells. Part Nr: 80540197.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Oil Hardening Drill Rod Round 3/8" Gauge .3750 Dec. Equiv. US Specifications
USD 7.99
(Indicative price - actual current price possibly lower)
Technical data & information: O-1 oil hardening drill rod round carbon, .95% manganese, 1.20% silicon, .25% for βό" round and larger, we carry oil hardening drill rod rather than water hardening. The o-1 in this size range is characterized by good machineability, smooth finish as well as superior dimensional stability and excellent hardening characteristics. We recommend it for use in dies, tools, parts, and punches. Excellent for general use in the shop. Hardening: heat slowly to 1475β° f., 1525β° f. If a controlled furnace is not available, use 1500β° tempilaq. Hold at this temperature for a few seconds then quench in a light quenching oil. Temperi mfg: brownells specs: rods are 18" in length. US specification & reliable quality gunsmith metal stock by Brownells. Part Nr: 80541375.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Oil Hardening Drill Rod Round 5/16" Gauge .3125 Dec. Equiv. US Specifications
USD 7.99
(Indicative price - actual current price possibly lower)
Technical data & information: O-1 oil hardening drill rod round carbon, .95% manganese, 1.20% silicon, .25% for βό" round and larger, we carry oil hardening drill rod rather than water hardening. The o-1 in this size range is characterized by good machineability, smooth finish as well as superior dimensional stability and excellent hardening characteristics. We recommend it for use in dies, tools, parts, and punches. Excellent for general use in the shop. Hardening: heat slowly to 1475β° f., 1525β° f. If a controlled furnace is not available, use 1500β° tempilaq. Hold at this temperature for a few seconds then quench in a light quenching oil. Temperi mfg: brownells specs: rods are 18" in length. US specification & reliable quality gunsmith metal stock by Brownells. Part Nr: 80541312.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells La Salle "fatigue Proof" Steel Rods 3/8" Fatigue Proof Steel Rods US Specifications
USD 131.99
(Indicative price - actual current price possibly lower)
Technical data & information: Superior quality, high density; is very machineable and tough without brittleness, due to a higher ratio of manganese to carbon. Does not require heat treating like low density mild steel, perfect for spring guides, screws, firing pins, any parts that will be subject to extreme shock or repeated stress. Fatigueproof is a registered trademark of niagara lasalle corporation. Mfg: brownells specs: " (6.3mm), 5/16" (7.9mm), 3/8" (9.5mm) diameter. 18" (45.7cm) long steel rods. 6 rods per pak. Assortment contains 2 of each size. 140,000 psi tensile strength, rc 30-36. Tolerances are or x"x .006" (.15mm). US specification & reliable quality gunsmith metal stock by Brownells. Part Nr: 80531375.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Water Hardening Drill Rod #51 Gauge .0660 Dec. Equiv. Round US Specifications
USD 4.99
(Indicative price - actual current price possibly lower)
Technical data & information: One of the remarkable features of these tool steels is the low draw temperature to achieve maximum torsion impact strength. Most drawing can be done in a kitchen oven! or you can easily make a small and efficient draw furnace on your bench using furnace brick, a simple heat element and a kitchen oven heat control. Draw all steel shown one hour.W-1 water hardening drill rodcarbon, 1.00% manganese, .40% silicon, .20% a fine-grained, commercial quality steel, w-1 can be used for tools, parts, dies or punches which require great hardness and a tough inner core for maximum strength. The sizes we carry should meet 99% of all requirements for pins in guns mfg: brownells specs: rods are 18" in length. US specification & reliable quality gunsmith metal stock by Brownells. Part Nr: 80540066.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Oil Hardening Drill Rod Round 7/16" Gauge .4375 Dec. Equiv. US Specifications
USD 10.99
(Indicative price - actual current price possibly lower)
Technical data & information: O-1 oil hardening drill rod round carbon, .95% manganese, 1.20% silicon, .25% for βό" round and larger, we carry oil hardening drill rod rather than water hardening. The o-1 in this size range is characterized by good machineability, smooth finish as well as superior dimensional stability and excellent hardening characteristics. We recommend it for use in dies, tools, parts, and punches. Excellent for general use in the shop. Hardening: heat slowly to 1475β° f., 1525β° f. If a controlled furnace is not available, use 1500β° tempilaq. Hold at this temperature for a few seconds then quench in a light quenching oil. Temperi mfg: brownells specs: rods are 18" in length. US specification & reliable quality gunsmith metal stock by Brownells. Part Nr: 80541437.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Water Hardening Drill Rod #32 Gauge .1150 Dec. Equiv. Round US Specifications
USD 4.99
(Indicative price - actual current price possibly lower)
Technical data & information: One of the remarkable features of these tool steels is the low draw temperature to achieve maximum torsion impact strength. Most drawing can be done in a kitchen oven! or you can easily make a small and efficient draw furnace on your bench using furnace brick, a simple heat element and a kitchen oven heat control. Draw all steel shown one hour.W-1 water hardening drill rodcarbon, 1.00% manganese, .40% silicon, .20% a fine-grained, commercial quality steel, w-1 can be used for tools, parts, dies or punches which require great hardness and a tough inner core for maximum strength. The sizes we carry should meet 99% of all requirements for pins in guns mfg: brownells specs: rods are 18" in length. US specification & reliable quality gunsmith metal stock by Brownells. Part Nr: 80540115.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Oil Hardening Drill Rod Round 1/2" Gauge .5000 Dec. Equiv. US Specifications
USD 13.99
(Indicative price - actual current price possibly lower)
Technical data & information: O-1 oil hardening drill rod round carbon, .95% manganese, 1.20% silicon, .25% for βό" round and larger, we carry oil hardening drill rod rather than water hardening. The o-1 in this size range is characterized by good machineability, smooth finish as well as superior dimensional stability and excellent hardening characteristics. We recommend it for use in dies, tools, parts, and punches. Excellent for general use in the shop. Hardening: heat slowly to 1475β° f., 1525β° f. If a controlled furnace is not available, use 1500β° tempilaq. Hold at this temperature for a few seconds then quench in a light quenching oil. Temperi mfg: brownells specs: rods are 18" in length. US specification & reliable quality gunsmith metal stock by Brownells. Part Nr: 80541500.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Water Hardening Drill Rod #34 Gauge .1100 Dec. Equiv. Round US Specifications
USD 4.99
(Indicative price - actual current price possibly lower)
Technical data & information: One of the remarkable features of these tool steels is the low draw temperature to achieve maximum torsion impact strength. Most drawing can be done in a kitchen oven! or you can easily make a small and efficient draw furnace on your bench using furnace brick, a simple heat element and a kitchen oven heat control. Draw all steel shown one hour.W-1 water hardening drill rodcarbon, 1.00% manganese, .40% silicon, .20% a fine-grained, commercial quality steel, w-1 can be used for tools, parts, dies or punches which require great hardness and a tough inner core for maximum strength. The sizes we carry should meet 99% of all requirements for pins in guns mfg: brownells specs: rods are 18" in length. US specification & reliable quality gunsmith metal stock by Brownells. Part Nr: 80540110.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Water Hardening Drill Rod #25 Gauge .1480 Dec. Equiv. Round US Specifications
USD 4.99
(Indicative price - actual current price possibly lower)
Technical data & information: One of the remarkable features of these tool steels is the low draw temperature to achieve maximum torsion impact strength. Most drawing can be done in a kitchen oven! or you can easily make a small and efficient draw furnace on your bench using furnace brick, a simple heat element and a kitchen oven heat control. Draw all steel shown one hour.W-1 water hardening drill rodcarbon, 1.00% manganese, .40% silicon, .20% a fine-grained, commercial quality steel, w-1 can be used for tools, parts, dies or punches which require great hardness and a tough inner core for maximum strength. The sizes we carry should meet 99% of all requirements for pins in guns mfg: brownells specs: rods are 18" in length. US specification & reliable quality gunsmith metal stock by Brownells. Part Nr: 80540148.
More Details : click here
SEARCH this site : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Gunsmith Metal Stock US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
