Gunsmith Stock Wood Finishes US Specifications
|
|
|
 Velvit Oil #200 Natural Pint US Specifications
USD 21.99
(Indicative price - actual current price possibly lower)
Technical data & information: A wood finish that stains, fills, seals, protects, and beautifies all in one coat. Apply velvit oil to the wood surfaces, leave it penetrate 30 to 45 minutes. If it starts to dry out, apply more velvit oil, but keep the surface wet at least 30 minutes. Once it has penetrated for at least 30 minutes, start to wet sand using 320 to 400 grit wet/dry sandpaper. The sanding action creates a paste that fills the pores of the wood. Take a soft cloth and wipe off the excess. Leave it dry 24 hours. Nothing else need be applied over it. Mfg: velvit products co. US specification & reliable quality gunsmith stock wood finishes by Velvit. Part Nr: 200PINT.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Acra Coat Wood Gloss US Specifications
USD 3.99
(Indicative price - actual current price possibly lower)
Technical data & information: Gives wood and plastic stocks a durable, weather-proof finish. Not a one-shot wonder finish, but one you apply in multiple, thin coats until you reach the desired luster. Resists all but the most aggressive bore solvents. Normal cure time, one week, shortened by warming stock to 90 f. Replacement nozzle, the easy solution for clogged nozzles. Clean out nozzle, use only to clear a plugged pickup tube. Mfg: brownells specs: aerosol. 12 oz. (340 g). Clear matte or gloss finish. Nozzles are correct size for acra-coat, wood, sold in paks of 12. Clean out nozzle not intended for spraying. US specification & reliable quality gunsmith stock wood finishes by Brownells. Part Nr: 1A29S020.
More Details : click here
SEARCH this site : click here
|
|
|
Laurel Mountain Forge Permalyn Stock Finish & Sealer 4 Oz. Stock Finish US Specifications
USD 17.99
(Indicative price - actual current price possibly lower)
Technical data & information: Developed by rick schrieber, used and recommended by john bivins and joe balickie in their stockmaking video (also rifle #87 and may '84 muzzle blasts). Made with oil-modified polyurethanes that give the superior water resistance of the plastics without the brittleness, temperature sensitivity and later touch-up problems. Produce high-quality, "in-the-wood" or "built-up" finishes to delight even the pickiest pro. Both contain the same basic resins and polymers. The sealer penetrates deeper into the wood, while the finish does a better job of filling pores in open-grained woods. Mfg: laurel mountain forge specs: 4 fl. Oz. (118 ml) or 1 qt. (32 fl. Oz./946 ml) cans. US specification & reliable quality gunsmith stock wood finishes by Laurel. Part Nr: 519-300-004.
More Details : click here
SEARCH this site : click here
|
|
|
Chem Pak Gun Sav'R Custom Oil Gunstock Finish Satin Gloss 14 Oz. US Specifications
USD 19.99
(Indicative price - actual current price possibly lower)
Technical data & information: Our tech department gave this aerosol finish five stars. A super-tough, professional-looking stock finish applied in only hours without runs or sags. Fills as it coats so you won't spend extra time cutting-back or sanding in. Dries to the touch in only 45 minutes and can be recoated in as little as six hours. Specially formulated, oil-modified urethanes resist scuffs and scratches but provide the look and feel of traditional, hand-rubbed oil finishes, without all the hard work. Will not cloud or discolor with age; dries to a uniform satin finish without the aggravating splotches so common in many aerosol "furniture" finishes. Mfg: chem-pak specs: satin gloss. 14 oz./397g aerosol cans. US specification & reliable quality gunsmith stock wood finishes by Chem-Pak. Part Nr: 64120.
More Details : click here
SEARCH this site : click here
|
|
|
Birchwood Casey Tru Oil Stock Finish 3 Oz. Tru Oil US Specifications
USD 7.99
(Indicative price - actual current price possibly lower)
Technical data & information: Easy-to-use tru-oil brings out the warm, natural beauty of a wood stock and gives it the look of a deep, rich, hand-rubbed finish without the hassle. It requires an average of only three coats and dries so fast, 90 to 120 minutes per coat, that a stock can be finished in one day! tru-oil is a purified triple-processed blend of all-natural oils that penetrates into the grain to seal out moisture. Won't yellow or cloud the grain, and the surface becomes harder and tougher. Apply multiple coats to produce a high-gloss finish, or for a more subdued satin finish, cut back the gloss with fine steel wool or rubbing compound, then apply birchwood casey stock sheen & conditioner (sold sep mfg: birchwood casey specs: available in 3 fl. Oz. (90 ml) and 8 fl. Oz. (237 ml) bottles, or 11 fl. Oz. (325 ml) aerosol can. Dries in 90 to 120 minutes; cures in 48 hours. US specification & reliable quality gunsmith stock wood finishes by Birchwood Casey. Part Nr: 23123.
More Details : click here
SEARCH this site : click here
|
|
|
Blue Wonder Wood Shine US Specifications
USD 7.99
(Indicative price - actual current price possibly lower)
Technical data & information: Simple wipe on/wipe off formula penetrates deep into wood to restore the original luster of your valuable wood stocks, handgun grips, gun cases, or presentation cases. Blended formula with natural oils covers minor scratches, returns moisture to dried out wood and protects against damage from uv light. Doesn't leave behind a slippery residue. Mfg: blue wonder specs: 4 fl. Oz. (118 ml) squeeze bottle. US specification & reliable quality gunsmith stock wood finishes by Blue Wonder. Part Nr: BWWS4OZS.
More Details : click here
SEARCH this site : click here
|
|
|
Birchwood Casey Tru Oil Stock Finish 8 Oz. Tru Oil US Specifications
USD 10.99
(Indicative price - actual current price possibly lower)
Technical data & information: Easy-to-use tru-oil brings out the warm, natural beauty of a wood stock and gives it the look of a deep, rich, hand-rubbed finish without the hassle. It requires an average of only three coats and dries so fast, 90 to 120 minutes per coat, that a stock can be finished in one day! tru-oil is a purified triple-processed blend of all-natural oils that penetrates into the grain to seal out moisture. Won't yellow or cloud the grain, and the surface becomes harder and tougher. Apply multiple coats to produce a high-gloss finish, or for a more subdued satin finish, cut back the gloss with fine steel wool or rubbing compound, then apply birchwood casey stock sheen & conditioner (sold sep mfg: birchwood casey specs: available in 3 fl. Oz. (90 ml) and 8 fl. Oz. (237 ml) bottles, or 11 fl. Oz. (325 ml) aerosol can. Dries in 90 to 120 minutes; cures in 48 hours. US specification & reliable quality gunsmith stock wood finishes by Birchwood Casey. Part Nr: 23035.
More Details : click here
SEARCH this site : click here
|
|
|
Velvit Oil #420 Deep Walnut 1/2 Pint US Specifications
USD 18.99
(Indicative price - actual current price possibly lower)
Technical data & information: A wood finish that stains, fills, seals, protects, and beautifies all in one coat. Apply velvit oil to the wood surfaces, leave it penetrate 30 to 45 minutes. If it starts to dry out, apply more velvit oil, but keep the surface wet at least 30 minutes. Once it has penetrated for at least 30 minutes, start to wet sand using 320 to 400 grit wet/dry sandpaper. The sanding action creates a paste that fills the pores of the wood. Take a soft cloth and wipe off the excess. Leave it dry 24 hours. Nothing else need be applied over it. Mfg: velvit products co. US specification & reliable quality gunsmith stock wood finishes by Velvit. Part Nr: 42012PINT.
More Details : click here
SEARCH this site : click here
|
|
|
Laurel Mountain Forge Permalyn Stock Finish & Sealer 4 Oz. Stock Sealer US Specifications
USD 15.99
(Indicative price - actual current price possibly lower)
Technical data & information: Developed by rick schrieber, used and recommended by john bivins and joe balickie in their stockmaking video (also rifle #87 and may '84 muzzle blasts). Made with oil-modified polyurethanes that give the superior water resistance of the plastics without the brittleness, temperature sensitivity and later touch-up problems. Produce high-quality, "in-the-wood" or "built-up" finishes to delight even the pickiest pro. Both contain the same basic resins and polymers. The sealer penetrates deeper into the wood, while the finish does a better job of filling pores in open-grained woods. Mfg: laurel mountain forge specs: 4 fl. Oz. (118 ml) or 1 qt. (32 fl. Oz./946 ml) cans. US specification & reliable quality gunsmith stock wood finishes by Laurel. Part Nr: 519-301-004.
More Details : click here
SEARCH this site : click here
|
|
|
Laurel Mountain Forge Permalyn Stock Finish & Sealer 1 Qt. Stock Finish US Specifications
USD 49.99
(Indicative price - actual current price possibly lower)
Technical data & information: Developed by rick schrieber, used and recommended by john bivins and joe balickie in their stockmaking video (also rifle #87 and may '84 muzzle blasts). Made with oil-modified polyurethanes that give the superior water resistance of the plastics without the brittleness, temperature sensitivity and later touch-up problems. Produce high-quality, "in-the-wood" or "built-up" finishes to delight even the pickiest pro. Both contain the same basic resins and polymers. The sealer penetrates deeper into the wood, while the finish does a better job of filling pores in open-grained woods. Mfg: laurel mountain forge specs: 4 fl. Oz. (118 ml) or 1 qt. (32 fl. Oz./946 ml) cans. US specification & reliable quality gunsmith stock wood finishes by Laurel. Part Nr: 519-300-032.
More Details : click here
SEARCH this site : click here
|
|
|
Chem Pak Pro Custom Oil Gunstock Finish Pro Custom Oil Finish US Specifications
USD 18.99
(Indicative price - actual current price possibly lower)
Technical data & information: Penetrates wood to seal out moisture and quickly fill the grain. Produces a hard, tough finish that dries tack-free in as little as 2-3 hours; dries to full cure in 48 hours. Tung oil-modified urethanes resist scuffing, marring and will not chip, crack or peel. Dries to a soft gloss; can be polished to a high gloss or cut to a satin finish. Mfg: chem-pak specs: 9 fl. Oz. (267ml). US specification & reliable quality gunsmith stock wood finishes by Chem-Pak. Part Nr: 642A.
More Details : click here
SEARCH this site : click here
|
|
|
Gb Lin Speed Gunstock Oil Half Pint Lin Speed Finish Oil US Specifications
USD 29.99
(Indicative price - actual current price possibly lower)
Technical data & information: Pure linseed oil, specially refined to dry in just 2 to 3 hours to a tough, hard, easy-to-touch-up finish. So simple to use, you can even leave sanding dust to help fill pores. Apply stain (if desired) and follow with finger-dunks of lin-speed. Smooth out with the heel of your hand and set aside to dry. First coat will "freeze" sanding whiskers for easy removal, ending time consuming steaming and de-whiskering. Stop working so hard at your stock finishing! sand it well, then apply lin-speed and let dry! starter kit: get started right away with the lin-speed gunstock and fine woodwork starter kit. The kit contains the familiar 2 ounce jar of "gb" lin-speed, 3 pad mfg: gb lin-speed specs: 2 fl. Oz. (59.1ml) net contents jar. US specification & reliable quality gunsmith stock wood finishes by GB Lin-Speed. Part Nr: HALFPINT.
More Details : click here
SEARCH this site : click here
|
|
|
Velvit Oil #200 Natural 1/2 Pint US Specifications
USD 17.99
(Indicative price - actual current price possibly lower)
Technical data & information: A wood finish that stains, fills, seals, protects, and beautifies all in one coat. Apply velvit oil to the wood surfaces, leave it penetrate 30 to 45 minutes. If it starts to dry out, apply more velvit oil, but keep the surface wet at least 30 minutes. Once it has penetrated for at least 30 minutes, start to wet sand using 320 to 400 grit wet/dry sandpaper. The sanding action creates a paste that fills the pores of the wood. Take a soft cloth and wipe off the excess. Leave it dry 24 hours. Nothing else need be applied over it. Mfg: velvit products co. US specification & reliable quality gunsmith stock wood finishes by Velvit. Part Nr: 20012PINT.
More Details : click here
SEARCH this site : click here
|
|
|
|
Velvit Oil #420 Deep Walnut Pint US Specifications
USD 21.99
(Indicative price - actual current price possibly lower)
Technical data & information: A wood finish that stains, fills, seals, protects, and beautifies all in one coat. Apply velvit oil to the wood surfaces, leave it penetrate 30 to 45 minutes. If it starts to dry out, apply more velvit oil, but keep the surface wet at least 30 minutes. Once it has penetrated for at least 30 minutes, start to wet sand using 320 to 400 grit wet/dry sandpaper. The sanding action creates a paste that fills the pores of the wood. Take a soft cloth and wipe off the excess. Leave it dry 24 hours. Nothing else need be applied over it. Mfg: velvit products co. US specification & reliable quality gunsmith stock wood finishes by Velvit. Part Nr: 420PINT.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Acra Coat Wood Matte Clear US Specifications
USD 3.99
(Indicative price - actual current price possibly lower)
Technical data & information: Gives wood and plastic stocks a durable, weather-proof finish. Not a one-shot wonder finish, but one you apply in multiple, thin coats until you reach the desired luster. Resists all but the most aggressive bore solvents. Normal cure time, one week, shortened by warming stock to 90 f. Replacement nozzle, the easy solution for clogged nozzles. Clean out nozzle, use only to clear a plugged pickup tube. Mfg: brownells specs: aerosol. 12 oz. (340 g). Clear matte or gloss finish. Nozzles are correct size for acra-coat, wood, sold in paks of 12. Clean out nozzle not intended for spraying. US specification & reliable quality gunsmith stock wood finishes by Brownells. Part Nr: 1A29S022.
More Details : click here
SEARCH this site : click here
|
|
|
Herters Stock Filler French Red 8 Oz. US Specifications
USD 17.99
(Indicative price - actual current price possibly lower)
Technical data & information: A combination of the finest oils, ultra-fine stock filler and the traditional herter's stains bring out the warmth and hidden beauty of any gunstock. Quickly fills the pores and seals the wood with natural oils and preservatives. French red, a rich walnut color with just a hint of red; closely matches pre-'64 winchesters and older brownings. Walnut, a vivid, rich brown enhances real walnut and darkens lighter hardwoods. Clear, no stains included, intended to enrichen and enhance the grain on birdseye maple, myrtle or other fancy-grained, light-colored woods. Mfg: herters specs: oil base filler and stain. 16 fl. Oz. (473 ml), 8 fl. Oz. (237 ml). US specification & reliable quality gunsmith stock wood finishes by Herters. Part Nr: 464-101-008.
More Details : click here
SEARCH this site : click here
|
|
|
Laurel Mountain Forge Permalyn Stock Finish & Sealer 1 Qt. Stock Sealer US Specifications
USD 41.99
(Indicative price - actual current price possibly lower)
Technical data & information: Developed by rick schrieber, used and recommended by john bivins and joe balickie in their stockmaking video (also rifle #87 and may '84 muzzle blasts). Made with oil-modified polyurethanes that give the superior water resistance of the plastics without the brittleness, temperature sensitivity and later touch-up problems. Produce high-quality, "in-the-wood" or "built-up" finishes to delight even the pickiest pro. Both contain the same basic resins and polymers. The sealer penetrates deeper into the wood, while the finish does a better job of filling pores in open-grained woods. Mfg: laurel mountain forge specs: 4 fl. Oz. (118 ml) or 1 qt. (32 fl. Oz./946 ml) cans. US specification & reliable quality gunsmith stock wood finishes by Laurel. Part Nr: 519-301-032.
More Details : click here
SEARCH this site : click here
|
|
|
Gb Lin Speed Gunstock Oil 2 Oz. Lin Speed US Specifications
USD 13.99
(Indicative price - actual current price possibly lower)
Technical data & information: Pure linseed oil, specially refined to dry in just 2 to 3 hours to a tough, hard, easy-to-touch-up finish. So simple to use, you can even leave sanding dust to help fill pores. Apply stain (if desired) and follow with finger-dunks of lin-speed. Smooth out with the heel of your hand and set aside to dry. First coat will "freeze" sanding whiskers for easy removal, ending time consuming steaming and de-whiskering. Stop working so hard at your stock finishing! sand it well, then apply lin-speed and let dry! starter kit: get started right away with the lin-speed gunstock and fine woodwork starter kit. The kit contains the familiar 2 ounce jar of "gb" lin-speed, 3 pad mfg: gb lin-speed specs: 2 fl. Oz. (59.1ml) net contents jar. US specification & reliable quality gunsmith stock wood finishes by GB Lin-Speed. Part Nr: 543-100-002.
More Details : click here
SEARCH this site : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Gunsmith Stock Wood Finishes US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
