Handgun Barrels US Specifications
|
|
|
 Kart Precision Barrel 1911 Precision Quality Barrel 5" Kart 1911 Auto Barrel .38 Super C/P US Specifications
USD 196.99
(Indicative price - actual current price possibly lower)
Technical data & information: Forged from ordnance steel to strict, national match specs; rifled by a proprietary technique that holds lands and grooves to exceptionally close tolerances and leaves the surface finish mirror smooth. Air gauged to maintain .0002" tolerance through the bore. Feed ramps are throated for wadcutter ammo. Standard barrel, non-ramped, oversize hood, top and bottom lugs to achieve an exact fit for optimum match accuracy. Ramped barrel, fully supports the case head; gives direct feeding from magazine to chamber. Requires machining of frame. Gunsmithing fitting required. Std, standard barrel, non-ramped. W/n, wilson/nowlin ramp. C/p, clark/para ordnance ramp mfg: kart precision barrel specs: 4150 ordnance steel, in-the-white. Available in 5" (12.7cm), 6" (15.2cm), or commander 4.25" (10.8cm) lengths. US specification & reliable quality handgun barrels by Kart. Part Nr: 472-020-138.
More Details : click here
SEARCH this site : click here
|
|
|
Faxon Firearms Sig Sauer P320 Fullsize 9mm Luger Flame Fluted Barrel Sig Sauer P320 Fullsize Nitride 9mm Luger Threaded Barrel US Specifications
USD 204.25
(Indicative price - actual current price possibly lower)
Technical data & information: Upgrade your full size sig sauer p320 with a faxon flame fluted match grade barrel. The barrel is made from the finest 416-r stainless steel with conventional 1:10 twist rifling and an 11-degree target crown. Faxon also coated the barrel with a salt bath nitride finish that is highly resistant to wear as well as their distinctive flame fluting. Flame fluted barrel caliber: 9mm luger 11-degree target crown 416-r stainless steel construction black finish this barrel for the sig sauer p320 full size 9mm from faxon is the non-threaded model with a 11-degree target crown. Faxon does offer a threaded model if that is desired. Mfg: faxon firearms. US specification & reliable quality handgun barrels by Faxon. Part Nr: 320B910NFLOQT.
More Details : click here
SEARCH this site : click here
|
|
|
Kart Precision Barrel 1911 Xact Fit Barrel Kit 5" Barrel .40 S&W Fits C/P US Specifications
USD 252.99
(Indicative price - actual current price possibly lower)
Technical data & information: Install a precision quality barrel using just four small hand tools. The only fitting required is to adjust lockup with the two raised pads located on either side of the rear locking groove, cut the barrel hood to correct length and fit the bushing to the slide. A national match bushing is pre-fit to the barrel; has oversize o.D. For precise fitting to slide. Bottom lugs are fully finished and the correct length link installed to save hours of work. Mfg: kart precision barrel specs: 4150 ordnance steel, in-the-white. Available in 5" (12.7cm), 6" (15.2cm), or commander 4.25" (10.8cm) lengths. (n/r) non-ramped. (w/n) wilson/nowlin ramp. (c/p) clark/para ramp. Ramped barrels require machining of frame. Requires gunsmith fitting. Includes instructions. US specification & reliable quality handgun barrels by Kart. Part Nr: 472-003-040.
More Details : click here
SEARCH this site : click here
|
|
|
Faxon Firearms Threaded Compact Barrel For Glock19 Gen 1 4 G19 Gen 1 4 Compact Threaded Barrel Saami 9mm Black US Specifications
USD 132.05
(Indicative price - actual current price possibly lower)
Technical data & information: Faxon's threaded barrels for glock 19 have been described as "fastidiously engineered, meticulously machined, and exhaustively tested." we concur. These barrels are machined from triple stress-relieved, 4150 carbon steel for a tighter fit than the oem barrel. As a result, the faxon threaded barrel for glock 19 gives a more precise lockup for greater accuracy potential. The faxon g19 threaded barrel has 1-10" twist conventional rifling that'll stabilize all 9mm projectiles, including heavy subsonic ammunition, as well as cast lead bullets (a no-no in factory glock barrels!). Universal fit, compatible with g19 gen1-4 9mm saami-spec ch mfg: faxon firearms. US specification & reliable quality handgun barrels by Faxon. Part Nr: GA910N19NGQT.
More Details : click here
SEARCH this site : click here
|
|
|
Storm Lake Threaded Barrels For Glock 45acp 5.30" For Glock 21 .578 28 Black US Specifications
USD 235.99
(Indicative price - actual current price possibly lower)
Technical data & information: Features: machined 416 stainless steel glock barrels black isonite qpq finish held to tolerances of .001" cut-broach rifling 1-16 twist include thread protector rc 40-42 may require minor fitting available for glock 17, 19, and 21 glock 17 & 19 barrels have β½-28 threading (for suppressor without o-ring) glock 21 barrel has .578"-28 threading (for suppressor without o-ring) benefits: cut-broach rifling allows for cast bullets, as well as jacket bullets to be used tight tolerances maximize accuracy threading allows for attachment of suppressors or other muzzle mfg: storm lake. US specification & reliable quality handgun barrels by Storm Lake. Part Nr: 34022.
More Details : click here
SEARCH this site : click here
|
|
|
Zev Technologies Match Barrels For G17 & G19 Match G19 Barrel Stainless US Specifications
USD 237.5
(Indicative price - actual current price possibly lower)
Technical data & information: Zev technologies match grade drop-in glock replacement barrels feature extremely tight tolerances and are manufactured with pre-hardened chromium stainless steel (416r) that was originally designed for use in match grade rifle barrels. This material provides high tensile strength and toughness to withstand typical chamber pressures while still being highly corrosion resistant. Zev match grade barrel bores are some of the most precise in the industry. Every barrel is double honed (rough and finish) until a minimum surface finish of 16 ra is reached. During this process the barrels are held to a final dimension of /- 0.0002" for consistency and accuracy. The barr mfg: zev technologies. US specification & reliable quality handgun barrels by ZEV. Part Nr: BBL19D.
More Details : click here
SEARCH this site : click here
|
|
|
Us Armament Corporation Colt 1903 Barrel .32 Acp Colt 1903 Barrel Threaded For Suppressor.32 Acp US Specifications
USD 128.99
(Indicative price - actual current price possibly lower)
Technical data & information: Built to original factory specifications, this reproduction colt 1903 replacement barrel will fit all late-production types 3-5 and u.S. Armament's reproduction 1903 general officer's pocket pistol. These barrels are machined from high-grade ordnance steel using the latest technology and come in-the-white, with no markings. Even better, the colt 1903 replacement barrel is also available in a threaded model, ready to accept the latest sound suppressor, so you can enjoy shooting your classic without creating "noise pollution!" correct, original .32 acp chambering helps you preserve, or regain, your 1903's superb accuracy 6 lugs at rear, mfg: us armament corporation. US specification & reliable quality handgun barrels by US Armament. Part Nr: 19032A.
More Details : click here
SEARCH this site : click here
|
|
|
Ed Brown 1911 Drop In Match Barrels 1911 45acp Commander Barrel US Specifications
USD 179.99
(Indicative price - actual current price possibly lower)
Technical data & information: Cnc machined with slightly oversized dimensions for tighter barrel lockup and a "match quality", drop-in fit. Premium stainless steel bar stock is machined, heat treated and cryo stress relieved before final rifling to improve accuracy and barrel life. Precision, broach cut rifling gives outstanding accuracy with all bullet types, including lead. Complete kit includes pre-fit, match-grade barrel, bushing, link and pin for faster installation. May require minor fitting. Mfg: ed brown specs: t-416 ss, cut rifled, rc 38-42. 3.5" (8.89 cm), commander (co), 4.25" (10.8cm), government model (gm), 5" (12.7cm) long. US specification & reliable quality handgun barrels by Ed Brown. Part Nr: 924345.
More Details : click here
SEARCH this site : click here
|
|
|
Agency Arms Threaded Standard Line Barrel G43 Titanium Nitride US Specifications
USD 170
(Indicative price - actual current price possibly lower)
Technical data & information: The agency arms threaded standard line barrel is a perfect option for those looking to join the growing cadre of gun owners who incorporate a sound suppressor into their pistol platform. The agency arms threaded standard line barrel features a barrel makeup using 416r stainless, which provides a number of anti-corrosive and anti-wear properties, ensuring a long-lasting barrel life. Pulled broach used in rifling 1:10 twist rate threaded for suppression with 1/2"x28 tpi pitch titanium nitride finish the agency arms threaded standard line barrel uses subtle machined markings on the backside of the lockup, ensuring a slick, minimalist look. Mfg: agency arms llc. US specification & reliable quality handgun barrels by Agency. Part Nr: T1G43TN.
More Details : click here
SEARCH this site : click here
|
|
|
Zev Technologies Match Barrels For G17 & G19 Match G17 Barrel Bronze US Specifications
USD 237.5
(Indicative price - actual current price possibly lower)
Technical data & information: Zev technologies match grade drop-in glock replacement barrels feature extremely tight tolerances and are manufactured with pre-hardened chromium stainless steel (416r) that was originally designed for use in match grade rifle barrels. This material provides high tensile strength and toughness to withstand typical chamber pressures while still being highly corrosion resistant. Zev match grade barrel bores are some of the most precise in the industry. Every barrel is double honed (rough and finish) until a minimum surface finish of 16 ra is reached. During this process the barrels are held to a final dimension of /- 0.0002" for consistency and accuracy. The barr mfg: zev technologies. US specification & reliable quality handgun barrels by ZEV. Part Nr: BBL17DBRZ.
More Details : click here
SEARCH this site : click here
|
|
|
Nowlin 9mm Stainless Steel 1911 Pre Fit Match Grade Barrel 5" Ramped 9mm Ramped 5" US Specifications
USD 242.99
(Indicative price - actual current price possibly lower)
Technical data & information: The easiest way to install the superb performance of nowlin's ecm match-grade barrels in your 1911 auto. Barrel kit comes complete with a pre-fitted, stainless steel bushing, barrel link and pin with little-to-no fitting required for installation. Barrels feature pre-fitted hood, top lugs and bottom feet that give a very close fit for increased accuracy in most 1911 autos. Includes factory-standard link and hardened, oversize pin. Mfg: nowlin. US specification & reliable quality handgun barrels by Nowlin. Part Nr: R5PF9.
More Details : click here
SEARCH this site : click here
|
|
|
Fusion Firearms 1911 9mm Commander 4.25" Wilson/Nowlin Ramp Barrel 1911 9mm Commander 4.25" Wilson/Nowlin Ramp Thrd Barrel US Specifications
USD 189.99
(Indicative price - actual current price possibly lower)
Technical data & information: 1911 barrel, fusion firearms "ultra match grade(umg)" 1911 4.25" commander length 1911 colt style wilson/nowlin ramped barrel chambered in 9mm. 416r certified stainless steel(eddystone verified, rifle grade), precision button rifled, hand honed and air-gauged bore, accu-bored chambers, precision broached, all precision cnc machined and manufactured with basic fitting points on the back of the hood and bottom of feet, so that most folks with a hand file or emory cloth precision fit for outstanding lock-up and superior match accuracy. 1:10 twist ratio. These will drop in tightly on many production manufactured 1911's, helping with a consistent tight lock-up and mfg: fusion firearms. US specification & reliable quality handgun barrels by Fusion. Part Nr: 1911BBL150.
More Details : click here
SEARCH this site : click here
|
|
|
Nowlin Officers Model 3.5" 45acp Nr Gunmith Fit Barrel Officers Model 3.5" 45acp Nr Gunsmith Fit Barrel US Specifications
USD 237.99
(Indicative price - actual current price possibly lower)
Technical data & information: Triple heat treated, highest quality, super match-grade barrels deliver maximum accuracy. Groove and bore tolerances held to an amazing .0002" by electro-discharge cathode machining (ecm). Unique, pre-cut design of the top lugs requires only minor fitting to achieve maximum lug engagement. Rifling is ultra-smooth, uniform, and precise. Smoother bore boosts velocity with all barrel lengths. Angled edge on the driving band increases gas seal for reduced fouling with all types of bullets, plus longer barrel life. Chamber may require finish reaming, check with headspace gauge before firing. Does not include link pin or link. Mfg: nowlin. US specification & reliable quality handgun barrels by Nowlin. Part Nr: SB3BBGO45.
More Details : click here
SEARCH this site : click here
|
|
|
Apex Tactical Specialties Inc Smith & Wesson M2.0 Semi Drop In Barrel US Specifications
USD 189.95
(Indicative price - actual current price possibly lower)
Technical data & information: The apex tactical semi drop-in 9mm barrel for the smith & wesson m&p m2.0 compact can dramatically improves the accuracy of your pistol. Accuracy tests with the semi drop-in 9mm barrel for the smith & wesson m&p m2.0 compact have achieved groups as small as 1-1/2" at 25 yards. Your performance may vary depending on ammunition, variations in factory firearms tolerances, and your skill. Precision-machined stainless steel 1-10" rifling best performance with 115 to 147 grain jacketed bullets the apex tactical semi drop-in 9mm barrel for the smith & wesson m&p m2.0 compact should, as the name indicates, drop right into most pistols mfg: apex tactical specialties inc. US specification & reliable quality handgun barrels by Apex. Part Nr: 105049.
More Details : click here
SEARCH this site : click here
|
|
|
Agency Arms Non Threaded Standard Line Barrel G34 Stainless Steel US Specifications
USD 160
(Indicative price - actual current price possibly lower)
Technical data & information: The agency arms non-threaded standard line barrel provides several clear benefits over the oem glock 34 barrel, ensuring that users can easily upgrade their pistols with a simple drop-in component. The agency arms non-threaded standard line barrel is constructed using 416r stainless, increasing a gun's ability to fight off corrosion and environmental wear. Rifling performed using a pulled broach barrel twist rate is 1:10 total barrel length is 5.32 inches stainless steel finish fits: glock34 gen 1-4 the agency arms non-threaded standard line barrel looks clean with a natural finish and minimal machining marks indicating the company and t mfg: agency arms llc. US specification & reliable quality handgun barrels by Agency. Part Nr: NT1G34SS.
More Details : click here
SEARCH this site : click here
|
|
|
Bar Sto Precision Machine 1911 Semi Fit Barrels 1911 Govt 5" Semi Fit 45acp Barrel US Specifications
USD 255.99
(Indicative price - actual current price possibly lower)
Technical data & information: These 1911 government 5" barrels are "semi fit", meaning they general require little to no fitting. Barrels may drop-in, but expect some fitting to be necessary. Barrels come with barrel link, bushing, & link pin. 45acp barrel is non-ramped. 9mm barrels are available with a wilson/nowlin (w/n) or para/clark (p/c) ramp. Bar-sto precision machine has been making some of the finest auto-pistol barrels since 1971. Bar-sto barrels have been used by the u.S. Marine corps marksman unit since 1977. All bar-sto pistol barrels are machined from solid 416 stainless steel bar stock which has been heat treated 39 to 43 rc and 180,000 psi tensile str mfg: bar-sto precision machine specs: fits, 1911 government with a 5" slide. Construction, stainless steel, hardened to 39 to 43 rc. Includes, barrel, bushing, link & link pin. US specification & reliable quality handgun barrels by Bar-Sto. Part Nr: 100-015-617.
More Details : click here
SEARCH this site : click here
|
|
|
Agency Arms Non Threaded Mid Line Barrel G19 Black Nitride US Specifications
USD 200
(Indicative price - actual current price possibly lower)
Technical data & information: The agency arms non-threaded mid line barrel is designed to offer improvement to any glock g19 pistol, giving users several upgraded highlights. The agency arms non-threaded mid line barrel improves barrel life by combating surface erosion and degradation, with 416r stainless-steel materials. Features pulled-broach rifling twist rate: 1:10 total barrel length is 4.02 inches black nitride finish other features of the agency arms non-threaded mid line barrel include machined gear flutes, as well as machined caliber and company information. Mfg: agency arms llc. US specification & reliable quality handgun barrels by Agency. Part Nr: NT2G19BN.
More Details : click here
SEARCH this site : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Handgun Barrels US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
