Heckler & Koch P9s Disconnector P9s 9mm US Specifications
Handgun Disconnectors by Heckler & Koch
|
 Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Egw Hd Ball Head Disconnector US Specifications
USD 34.99
(Indicative price - actual current price possibly lower)
Handgun Disconnectors US Specifications
Technical data & information: Egw's 1911 hd ball head disconnector installs to tighten tolerances in your 1911. The top of the disconnector is taller so that it does not drag on the sear pin. This is important when you are doing trigger work under 2 1/4 lbs. Since you can feel the slightest drag. The ball head has been designed to get rid of the click usually found on 1911s caused by the head moving back and forth in the frame hole. The geometry of the disconnector has been altered so that it is not tripped when inserting a loaded magazine. The bottom spade incorporates a small .006 corner radius so that the disconnector does not dig into the trigger bow and it improves functionality. Mfg: egw specs: machined from: american-made 4140 chrome molly steel hardened 48 to 49 rc. US specification & reliable quality handgun disconnectors by EGW. Part Nr: 10050.
More Details : click here
SEARCH this site : click here
|
|
|
Sti 1911 Disconnector US Specifications
USD 16.99
(Indicative price - actual current price possibly lower)
Handgun Disconnectors US Specifications
Technical data & information: A malfunctioning disconnector can cause your 1911 to unexpectedly double or even go full auto, risking your safety and those of others around you. Replace a worn or damaged disconnector with this replacement precision formed from exceptionally strong fn 0205 nickel-steel alloy. Heat-treated to rc 61 to resist surface wear, and given a tough, long-lasting black oxide finish. Factory original part for sti pistols; will also fit most other 1911s. Gunsmith fitting may be required. Mfg: sti specs: steel, blued. 1.304" (33.1mm) oal. Fits all 1911 pistols. US specification & reliable quality handgun disconnectors by STI. Part Nr: 5000100.
More Details : click here
SEARCH this site : click here
|
|
|
Volquartsen Ruger Mark Ii & Mark Iii Disconnector US Specifications
USD 32.99
(Indicative price - actual current price possibly lower)
Handgun Disconnectors US Specifications
Technical data & information: Volquartsen cnc-machined disconnector is machined from 416 stainless steel. The machining process allows for several design changes to the the way the disconnector functions. Volquartsen has added material that increases rigidity over the previous design. This increased rigidity not only improves trigger pull but also will improve overall functioning as it will prevent any binding or interference that can be found on the prior design and factory design. This is due, in part, to variances in the factory frame tolerances. The cnc-machined design also features an integral pin without the step found on the factory design. Also included is a pin that comes in contact with the trigger plung mfg: volquartsen specs: fits ruger mkii, mkiii and 22/45. US specification & reliable quality handgun disconnectors by Volquartsen. Part Nr: VC2DN.
More Details : click here
SEARCH this site : click here
|
|
|
Wilson Combat 1911 Bullet Proof Disconnector US Specifications
USD 26.99
(Indicative price - actual current price possibly lower)
Handgun Disconnectors US Specifications
Technical data & information: Designed to meet or exceed factory specifications, with lapped and polished engagement surfaces to reduce friction for a smooth, clean trigger pull. Cnc machined from solid billet steel and heat-treated for hardness to help ensure precise contact between critical parts. For building custom pistols or just getting a good pistol back to original specs. Gunsmith installation recommended. Mfg: wilson combat specs: 1045 carbon steel, in-the-white. US specification & reliable quality handgun disconnectors by Wilson. Part Nr: 573.
More Details : click here
SEARCH this site : click here
|
|
|
Harrison Design & Consulting 1911 Auto Hd 120 Extreme Service Ignition Components Extreme Service Disconnector US Specifications
USD 29.99
(Indicative price - actual current price possibly lower)
Handgun Disconnectors US Specifications
Technical data & information: Critical ignition parts are machined from high-grade tool steel for precise fit and reliable, consistent function under the most demanding operating conditions. Each component is wire-edm cut, cnc machined and honed to final dimensions with /-.005" tolerances for drop-in fit on many 1911s, then heat-treated to rc 53-56 to maintain those dimensions through thousands of firing cycles. Hammer hooks are pre-prepped and sear nose polished for precise contact and crisp, clean letoff. Commander-style hammer has elongated spur with deep serrations to provide extra-secure thumb purchase. Beveled edges resist snagging on clothing and protect the thumb from abrasion, and slightly narrower hamm mfg: harrison design & consulting specs: hardened tool steel, in-the-white. Hardened to rc 53-56. Hd-120b set's sear has a black ionbond dlc finish. Some fitting may be required. US specification & reliable quality handgun disconnectors by Harrison. Part Nr: HD123.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Heckler & Koch P9s Disconnector P9s 9mm US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
