Leupold Mark 6 Ims Integral Mounting System 34mm Mark 6 Ims US Specifications
Gun Optics Mount Sets by Leupold
|
Technical data & information: The leupold integral mounting systems (ims) family quickly and easily eliminates the two most common issues faced when mounting standard riflescopes to ar-style rifles; scope height and eye relief. From the mark 1 to the mark 4, each aluminum ims cantilever design mounts directly to the firearm's mil-spec 1913/picatinny to raise the scope and push it forward, eliminating the need for risers or specialized optics with shortened eye relief. Mfg: leupold. US specification & reliable quality gun optics mount sets by Leupold. Part Nr: 115836.
 Indicative Price: USD 243.99
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more high specification gun & shooting items : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
American Defense Manufacturing Ad Scout Optics Mount 30mm Scout Mount No Offset US Specifications
USD 142.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: One-piece integral base and rings designed for traditional optics or similar sights that require two, 30mm rings for additional support. Available in three different lengths for proper eye relief adjustment. Ad-scout-s is standard length for mounting traditional optics. Ad-scout cantilever positions optics farther forward to provide 1" of extra space at the rear for mounting night-vision devices or when additional eye-relief is needed. Ad-scout-x uses the same great cantilever design as the ad-scout cantilever, but position's optics 2" farther forward for maximum room at the rear for mounting night-vision devices or making eye-relief adjustments. Mfg: american defense manufacturing specs: 6061 t6 aluminum, hardcoat t3 mil-spec anodized, matte black. Height measured from top of rail to bottom of scope body, .87" (2.2cm) high. Distance between rings, 2" (6.3cm.) high. 7.1 ounces (201g) weight. Ad-scout, s, 4" (11.4 cm) oal. Ad-scout cantilever, 6" (15.2cm) oal. Ad-scout -. US specification & reliable quality gun optics mount sets by American Defense. Part Nr: ADSCOUTS30STD.
More Details : click here
SEARCH this site : click here
|
|
|
Spuhr Isms Picatinny Mounts 34mm Isms Mount 147mm Mounting Length 40 Moa US Specifications
USD 410
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: The isms (ideal scope mount system) is an extremely sturdy scope mount, with the possibility to attach multiple optical accessories directly to the mount. Built-in scope level and 45-degree split of the rings provides unobstructed view of your optics knobs. The durable design of the mounts prevents damage to the scope due to flexing during heavy recoil. The rings are grooved on the inside for better grip and the mount base is milled from a sinlge billet of aluminum. Mounts include an innovative tool to index your scope properly to the mount and gun. Mounts have a minimum of 7 interfaces for accessories to be mounted. The rings are cut at a 45 degree angle instead of horizontally, prov mfg: spuhr. US specification & reliable quality gun optics mount sets by Spuhr. Part Nr: SP4803B.
More Details : click here
SEARCH this site : click here
|
|
|
Spuhr Quick Detach Isms Qdp Mount 34mm 1.5" 0 Moa Quick Detach Isms US Specifications
USD 495
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: The spuhr qdp mount is an extremely sturdy one-piece scope mount that clamps directly to any mil-std 1913 picatinny receiver rail or base. It combines the rock-solid stability of spuhr's proven ideal scope mounting system (isms) with easy-to-operate quick-release levers that let you attach and remove the spuhr qdp mount from your rifle with the mount and the scope as a single unit. The spuhr qdp mount has 45-degree split rings designed so the bulkiest part of the rings is not in your line of sight of the scope turrets. Another innovation is a bubble level built into the base to help you make sure the rifle is perfectly level, helping you control another important variable in lo mfg: spuhr. US specification & reliable quality gun optics mount sets by Spuhr. Part Nr: QDP4002.
More Details : click here
SEARCH this site : click here
|
|
|
Talley Light Weight Scope Mount Remington 700 1" Low Scope Mount US Specifications
USD 46.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: One-piece construction blends the ring and base into a single unit. Eliminating the ring/base joint not only keeps weight to a minimum, it provides a stronger mount. Each ring cap is 5⁄8" wide, with four, torx screws, to keep large scopes from slipping or shifting. Designed by mel forbes of new ultralight arms. Mfg: talley specs: 7000 series aluminum, black, anodized, matte finish. Accepts 1" dia. Scopes, unless otherwise listed in fits column for 30mm dia. Scopes. Height from bottom of ring to top of receiver: low, .400" (10.1mm), med, .500" (12.7mm). High, .640" (16.3mm), x‑high, .740" (18.8mm). Approx. We. US specification & reliable quality gun optics mount sets by Talley. Part Nr: 930700.
More Details : click here
SEARCH this site : click here
|
|
|
Spuhr Isms Picatinny Mounts 30mm Isms Mount 126mm Mounting Length 20.6 Moa US Specifications
USD 410
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: The isms (ideal scope mount system) is an extremely sturdy scope mount, with the possibility to attach multiple optical accessories directly to the mount. Built-in scope level and 45-degree split of the rings provides unobstructed view of your optics knobs. The durable design of the mounts prevents damage to the scope due to flexing during heavy recoil. The rings are grooved on the inside for better grip and the mount base is milled from a sinlge billet of aluminum. Mounts include an innovative tool to index your scope properly to the mount and gun. Mounts have a minimum of 7 interfaces for accessories to be mounted. The rings are cut at a 45 degree angle instead of horizontally, prov mfg: spuhr. US specification & reliable quality gun optics mount sets by Spuhr. Part Nr: SP3601.
More Details : click here
SEARCH this site : click here
|
|
|
Talley Light Weight Scope Mount Remington 700/725 La Low 30mm Scope Mounts 20 Moa US Specifications
USD 69.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: One-piece construction blends the ring and base into a single unit. Eliminating the ring/base joint not only keeps weight to a minimum, it provides a stronger mount. Each ring cap is 5⁄8" wide, with four, torx screws, to keep large scopes from slipping or shifting. Designed by mel forbes of new ultralight arms. Mfg: talley specs: 7000 series aluminum, black, anodized, matte finish. Accepts 1" dia. Scopes, unless otherwise listed in fits column for 30mm dia. Scopes. Height from bottom of ring to top of receiver: low, .400" (10.1mm), med, .500" (12.7mm). High, .640" (16.3mm), x‑high, .740" (18.8mm). Approx. We. US specification & reliable quality gun optics mount sets by Talley. Part Nr: 730700LM.
More Details : click here
SEARCH this site : click here
|
|
|
Nikon P Tactical 1 Piece Scope Mount 1" Rings 1 20 Moa 1 Piece Scope Mount US Specifications
USD 74.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: Nikon's p-tactical scope mount is essentially their m-tactical one-piece mount configured to accept the 1" tubes of their p-tactical line of ar-15 / msr scopes. Like its 30mm friendly cousin, the p-tactical mount is available in standard, dead-flat (0 moa) configuration or with built-in 20 moa elevation that helps you land accurate long-range shots without exceeding your scope's elevation adjustment. Of course, the p-tactical mount clamps to any ar-15 flattop receiver and provides optimum height and eye relief for your nikon p-tactical scope. It's geared for ar-15 installations, but can easily be used with a wide variety of other optics with 1" o.D. Tubes mfg: nikon. US specification & reliable quality gun optics mount sets by Nikon. Part Nr: 16561.
More Details : click here
SEARCH this site : click here
|
|
|
Talley Light Weight Scope Mount Remington 700 1" Medium Scope Mount US Specifications
USD 46.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: One-piece construction blends the ring and base into a single unit. Eliminating the ring/base joint not only keeps weight to a minimum, it provides a stronger mount. Each ring cap is 5⁄8" wide, with four, torx screws, to keep large scopes from slipping or shifting. Designed by mel forbes of new ultralight arms. Mfg: talley specs: 7000 series aluminum, black, anodized, matte finish. Accepts 1" dia. Scopes, unless otherwise listed in fits column for 30mm dia. Scopes. Height from bottom of ring to top of receiver: low, .400" (10.1mm), med, .500" (12.7mm). High, .640" (16.3mm), x‑high, .740" (18.8mm). Approx. We. US specification & reliable quality gun optics mount sets by Talley. Part Nr: 940700.
More Details : click here
SEARCH this site : click here
|
|
|
Aimpoint Twistmount For 3x Magnifier Twistmount Ring & Base Fits 3x Magnifier US Specifications
USD 200
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: Quick-detach mount for aimpoint 3x magnifier lets you change instantly from long-range to cqb shooting modes. Simply depress the release lever, twist the magnifier, and lift it off for an unencumbered close-range sight picture. Low-profile base clamps picatinny-style rail; extra-long scope ring provides ample surface contact area for a no-slip grasp on the magnifier body. May also be used as a quick-detach mount for other 30mm optics. Extra twistmount bases sold separately, so you can quickly move your magnifier from one rifle to another. Co-witness spacer (available separately) raises sight axis for proper co-witnessing with factory-height backup iron sights. Blends smoothly into contours o mfg: aimpoint specs: aluminum, hardcoat anodized, matte black. US specification & reliable quality gun optics mount sets by Aimpoint. Part Nr: 12234.
More Details : click here
SEARCH this site : click here
|
|
|
Warne Mfg. Company X Skel Mounts 1 Inch Red US Specifications
USD 109.19
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: Warne scope mounts is excited to introduce their second generation skel mount, the x-skel. This new msr mount offers an additional 1" of forward cantilever, and 1 piece clamp design for added strength. The rugged, lightweight design of the x-skel maintains our famous return to zero capability, and utilizes β½" hex nuts for rock solid attachment. It features a skeletonized ring body and caps for reduced weight and steel threaded cap inserts for maximum durability. The x-skel places your optic at the ideal height with a generous cantilever for proper eye relief, it will easily accommodate the longer eyepieces found on many of today's scopes. Lightweight mfg: warne mfg. Company. US specification & reliable quality gun optics mount sets by Warne. Part Nr: XSKEL1R.
More Details : click here
SEARCH this site : click here
|
|
|
Bobro Engineering Scar Dual Lever Mounts 35mm Right Side Levers Scar Mount US Specifications
USD 273.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: Dual lever mount that was initially engineered for the fn scar weapon family. We also use this mount on ar10/sr25 type weapons as the upper receiver is long enough to establish proper eye relief with most scopes. Levers can be configured on left or right side. We recommend levers on opposite side of cocking handle. If cocking handle is on the left for example, then order mount with "rr" suffix, meaning levers on the right. Left side levers will have the "ll" suffix. Can be configured with 30mm/34mm/35mm rings. Height- 1.5′ from top of rail to optic centerline. Weight 8.9 ounces. Ring spacing- 2.980′ inside to inside. Mfg: bobro engineering specs: height measured from top of rail to center of scope ring. US specification & reliable quality gun optics mount sets by Bobro. Part Nr: B17187350RR.
More Details : click here
SEARCH this site : click here
|
|
|
Zro Delta Dloc Micro T1 45 Degree Mount US Specifications
USD 134.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: Go from a primary, magnified optic to red dot action- with just a twist of your rifle- using the zrodelta dloc- micro 45 degree mount. Heavy duty springs in the side bar clamp down the instant you drop the mount on the rail, making installation hassle-free! sporting three recoil lugs, with six engagement points, the dloc system bites down on the rail like a snapping turtle, and it won't shake loose under heavy recoil or abuse in the field. Retention knob lets you hand tightening the mount to rail without worrying about stability. Fits the trijicon micro slim enough to fit under most magnified optics mount's extreme grip allows user to just hand mfg: zro delta. US specification & reliable quality gun optics mount sets by ZRO Delta. Part Nr: 7.023E+11.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Leupold Mark 6 Ims Integral Mounting System 34mm Mark 6 Ims US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
