Leupold Quick Release Mounting System Rings Quick Release Rings 1 In Medium Ext Matte US Specifications
Gun Scope Rings by Leupold
|
Technical data & information: Leupold's quick release mounting system allows the shooter to remove the scope with just a twist of the levers and reinstall it in only seconds with no loss of zero. Rings are made of steel and sold in pairs. Extension rings include one standard ring and one that is extended 5/8" to allow mounting of a wide variety of scopes. Mfg: leupold ring heights measured from top of base to center of ring. Super low; .550" (14mm). Low; .650" (16.5mm). Medium; .770" (19.5mm). High .900" (22.8mm), super high; 1.0" (2.5cm). US specification & reliable quality gun scope rings by Leupold. Part Nr: 49976.
 Indicative Price: USD 32.99
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more high specification gun & shooting items : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Burris Signature Double Dovetail Rings 1 High Matte US Specifications
USD 32.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: These rings fit the popular "twist-and-lock" bases by burris, leupold, and millett. The ring has a dovetail that fits in the slot in the base, then must be turned 90β° to lock it in. One of the strongest scope mounting systems ever devised, these rings will not shoot off their bases, even on the hardest-kicking, large caliber magnum rifles. Mfg: burris measurements are from the bottom of the scope tube to the bottom of the ring: med .270", high .390". US specification & reliable quality gun scope rings by Burris. Part Nr: 420571.
More Details : click here
SEARCH this site : click here
|
|
|
Nikon A Series Aluminum Rings A Series Rings 1" Low Matte US Specifications
USD 19.95
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Engineered specifically for lighter-weight rifles, the lightweight and economical a-series rings are designed for an incredible strength-to-weight ratio. The a-series rings incorporate an integral steel recoil bolt in both the fron and rear rings. This ensures a positive recoil surface across the entire slot of the base that is capable of withstanding heavy recoil. Strong, lightweight aluminum alloy construction with matte black finish fits all a-series/weaver/warne/picatinny style bases (except a-series rimfire) a-series rimfire 3/8" & 11mm base rails mfg: nikon. US specification & reliable quality gun scope rings by Nikon. Part Nr: 16166.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Picatinny Scope Rings 1" Medium (1.0") Steel Rings US Specifications
USD 89.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: These rings are precision machined to true mil-std 1913 specs to fit picatinny-type bases such as brownells modular flattop riser mount and picatinny scope bases. No special wrenches needed for installation. Underside of ring is undercut with a rounded radius that offers extra clearance for finger tightening the nut and for final tightening with a standard socket or flat-blade screwdriver. Extra-strong u.S.-size hex nuts have a deep slot that provides maximum engagement of screwdriver blade to help prevent slippage and slot damage-you can even use a u.S. Quarter in a pinch. Crossbolt has a square shank that serves as a recoil lug to solidly engage scope base when properly installed mfg: brownells specs: rings sold in pairs. Models available to fit 1" and 30mm scope bodies. Steel, 4140 billet steel, black, matte, oxide finish. Aluminum, 6061 t6 aluminum billet, hardcoat anodized black, matte. Heights measured from top of base to center of ring: low, .825" (2.1cm); med., 1&quo. US specification & reliable quality gun scope rings by Brownells. Part Nr: 1001805.
More Details : click here
SEARCH this site : click here
|
|
|
Weaver Top Mount Rings 1" High Satin Blue US Specifications
USD 25.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Heights: low and medium for scopes w/objective diameters to approximately 1.75"(44.45mm). High for objectives above 1.75". Extra high for scopes with objectives up to 60mm. Mfg: weaver specs: aluminum lower; steel cap, screws, crossbolt and nut. Satin blue, matte blue or brushed stainless finish. Height (above base): 1" diameter, low, .090" (2.28mm); med., .164" (4.16mm); high, .332" (8.43mm); x-high, .560" (14.2mm). 30mm diameter, low, .290" (7.3mm); high, .485" (12mm. US specification & reliable quality gun scope rings by Weaver. Part Nr: 49050.
More Details : click here
SEARCH this site : click here
|
|
|
Talley Rimfire Scope Rings Anchutz Rings Low US Specifications
USD 48.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Machined from steel bar stock to provide a strong mounting system with a smooth profile. Precision cut dovetails have the correct angle for an exact fit. Torx clamp screws snug down tightly for maximum holding power. Mfg: talley specs: steel, blue, satin finish. Accept 1" scopes. Height from top of base to bottom of ring: low, 313" (8mm). High, .600" (15.2mm). Sold in pairs. T/c classic rings require talley bases. US specification & reliable quality gun scope rings by Talley. Part Nr: 22TRL.
More Details : click here
SEARCH this site : click here
|
|
|
Burris Xtr Signature Rings 30mm High (1.25") Xtr Rings US Specifications
USD 99.95
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Unique, self-centering, dual steel clamps with full cross-through connection assure proper center on any width picatinny rail, while adding extra strength. Burris xtr rings only fit a picatinny style rail. Revolutionary pos-align inserts technology, in a tactical ring configuration pos-align inserts guarantee perfect centering and maximum scope-to-ring contact for tremendous gripping power without damaging the scope finish. Lets you virtually sight in your gun without moving the scope adjustments. Corrects misalignment caused by off-center receiver holes corrects for bases or rings being slightly off-center no need for expensive tapered bases or shimming for thous mfg: burris. US specification & reliable quality gun scope rings by Burris. Part Nr: 420222.
More Details : click here
SEARCH this site : click here
|
|
|
Talley Tactical Scope Rings 1" High Matte Black Tactical Rings US Specifications
USD 176.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Heavy-duty scope rings are precision-machined from solid billet aluminum with dual recoil lugs to ensure your tactical scope won't budge under the heaviest recoil. Full-width ring caps are cut from the same billet as the bottom half of the ring for precise fit and held in place with four stainless steel allen head screws that won't work loose when properly tightened. Matching serial numbers ensure you always mate the cap with the bottom it came with. Locking bar, heavy-duty crossbolt and oversized, β½" hex nut locks the ring to any mil-std 1913 picatinny rail. Hard-anodized for extra surface strength, with a non-reflective matte black finish. Engraved front and back mfg: talley specs: 7075 t6 aluminum, hardcoat anodized, matte black, with 303 stainless steel screws, black finish. 1.9" (5cm) wide, .665" (16.8mm) thick. Models available for 1" (2.5cm) or 30mm o.D. Scope tubes. Heights measured from top of base to center of ring: low, 1" (2.5cm); high. US specification & reliable quality gun scope rings by Talley. Part Nr: BAT10H.
More Details : click here
SEARCH this site : click here
|
|
|
Weaver Sure Grip Rings 1" High Matte Rings US Specifications
USD 21.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Steel caps with two screws per side provide extra strong, 4-screw, clamping power. Helps ensure that reticle stays square while tightening top screws. Large clamp nut locks rings to base, provides easy scope installation, removal; and accurate return to zero after re-installation. Mfg: weaver specs: aluminum lower; steel cap, screws, crossbolt and nut. Black, gloss or matte finish. Heights (above base): 1 (2.5cm) diameter, med., .164" (4.16mm); high, .332" (8.43mm); x-high, .560" (14.2mm). US specification & reliable quality gun scope rings by Weaver. Part Nr: 49164.
More Details : click here
SEARCH this site : click here
|
|
|
Leupold Quick Release Mounting System Rings 34mm High Matte Qr Rings US Specifications
USD 50.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Leupold's quick release mounting system allows the shooter to remove the scope with just a twist of the levers and reinstall it in only seconds with no loss of zero. Rings are made of steel and sold in pairs. Extension rings include one standard ring and one that is extended 5/8" to allow mounting of a wide variety of scopes. Mfg: leupold ring heights measured from top of base to center of ring. Super low; .550" (14mm). Low; .650" (16.5mm). Medium; .770" (19.5mm). High .900" (22.8mm), super high; 1.0" (2.5cm). US specification & reliable quality gun scope rings by Leupold. Part Nr: 118285.
More Details : click here
SEARCH this site : click here
|
|
|
Warne Mfg. Company Tactical Rings 30mm Medium Matte US Specifications
USD 111.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Maxima tactical rings and bases are engineered to withstand the most demanding conditions and situations of tactical shooting applications. Precision cnc machined from sintered steel technology provides strength, ductility and the durability you have come to expect from warne scope mounts. The maxima tactical rings have three primary differences from the rest of the warne line of rings; a 22% wider body for additional clamping around the scope tube and the mounting base; a 1/2" hex nut for clamping the ring to the base that easily accepts the mil-spec 65in/lb of torque; and lastly, the addition of up to eight t-15 torx style body screws, depending on the ring model, for superior hol mfg: warne mfg. Company specs: rings: steel, matte black, powder coat finish. Height is measured from top of base to inside bottom of the ring. Medium, .375" (9.5mm) high. High, .525" (13.3mm) high. Extra-high, .650" (16.5mm) high. Ultra-high, .935" (23.7mm) high. US specification & reliable quality gun scope rings by Warne. Part Nr: 614M.
More Details : click here
SEARCH this site : click here
|
|
|
Leupold Mark 4 Rings 1" Medium Matte Aluminum Mark 4 Rings US Specifications
USD 149.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Heavy-duty rings and bases are built to withstand extreme service without movement or loss of zero. Larger contact area between the scope/rings and base/receiver for less chance of movement. Large hex nuts on rings allow fast torquing of cross bolts for easy adjustment. Non reflective, matte finish. Mounting screws and torx head wrench included. Steel rings, cnc machined from solid 11l17 cold-rolled bar stock, then blued. Aluminum rings x"x cnc machined from 7075 t651 aluminum alloy and hardcoat anodized for maximum strength and wear resistance. Mfg: leupold specs: steel or aluminum, matte black finish rings, 1" (2.5cm) or 30mm (1.18in) inside diameter. Height from top of base to center of ring for both 1" and 30mm: med., .84" (2.1cm); high, 1.06" (2.7cm); super high, 1.4" (3.5cm). US specification & reliable quality gun scope rings by Leupold. Part Nr: 57524.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Leupold Quick Release Mounting System Rings Quick Release Rings 1 In Medium Ext Matte US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
