Magpul Ar 15 Bev Block Ar15/M4 US Specifications
Rifle Bench & Vise Blocks by Magpul
|
Technical data & information: The bev block (barrel extension vise) is an all-in-one, compact vise block tool for ar assembly operations of barrel nuts, flash hiders, etc. Mounts securely in a vise and provides support for both billet and forged upper receivers. Engages barrel extension with solid steel lugs and full length support shank to prevent flexing. Steel hardness is optimized for durability yet won't damage barrel extension, and magpul polymer is used for all other engagement surfaces to protect aluminum receiver. O-ring post uses bolt carrier for additional stability adn included pin keeps upper in proper position. The bev can also be turned over and used as a mag well vise block to support t mfg: magpul. US specification & reliable quality rifle bench & vise blocks by Magpul. Part Nr: MAG536.
 Indicative Price: USD 47.45
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more high specification gun & shooting items : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Brownells Mauser Receiver Holding Fixture Mauser Receiver Fixture US Specifications
USD 89.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks US Specifications
Technical data & information: Provides complete access to these hard-to-hold receivers, without the worry of crushing or damage. Securely holds mauser receivers and barreled actions in a bench vise, drill press or milling machine when drilling and tapping for scope bases, polishing, bolt lapping, milling or other modifications. The receiver is rigidly clamped to the fixture using a plate inside the frame rails and/or the stock mounting screws. Fits military and commercial m98 actions. Mfg: brownells specs: steel, blued. 9" (22.8cm) long, 1" (2.5cm) wide. Includes clamp plate and bolt. US specification & reliable quality rifle bench & vise blocks by Brownells. Part Nr: 080-919-000.
More Details : click here
SEARCH this site : click here
|
|
|
Daguanno Customs Ar 15 Receiver Raceway Fixture Ar 15/M16 Rrf US Specifications
USD 122.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks US Specifications
Technical data & information: Unlike typical vice-block type tools, the d'aguanno custom receiver raceway fixture provides a precision fit inside the receiver raceway to accurately fit all forged and machined receivers cut to mil-spec bolt carrier dimensions. The receiver raceway fixture is designed to allow the user to use the fixture for multiple assembly operations. Use to torque the barrel nut on the receiver as well as the muzzle device to the barrel the slot in the locating pin allows the installation of the gas tube without removing the upper from the fixture. Works great for multiple task like installing the forward assist, handguards, dustcovers, optics, and other tactical acces mfg: daguanno customs. US specification & reliable quality rifle bench & vise blocks by Daguanno. Part Nr: RRF.
More Details : click here
SEARCH this site : click here
|
|
|
Ergo Grips Ar 15/M16 Spike's Block Ar 15 Spike's Block US Specifications
USD 25.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks US Specifications
Technical data & information: One-piece, molded polymer stand securely supports the lower receiver for cleaning, maintenance or storage. Base has a small footprint and clamps to your workbench, while the top fits in the magwell of any ar-15 pattern rifle. Grooves in both sides of insert accept the mag catch to lock your rifle on the block. Can also be used as a wall mount for your rifle. Mfg: ergo grips specs: molded, glass-filled resin, black. 4-5/8" (11cm) long, 2" (5.1cm) wide, 6-1⁄8" (15.5cm) tall. 4.3 oz. (122g) wt. Permanent installation requires four βό" bolts or screws, not included. Assembly includes one block only. US specification & reliable quality rifle bench & vise blocks by Ergo. Part Nr: 4996.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Ar 15/M16 Upper Receiver Action Block US Specifications
USD 59.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks US Specifications
Technical data & information: Heavy-duty blocks allow you to firmly clamp ar-15/m16 receiver halves in a vise without risk of crushing, twisting, or otherwise distorting them when applying vise pressure or torquing the barrel nut. Keeps your rifle secure for safe, effective cleaning, assembly, and repair. High pressure, solvent resistant, structural rynite block and insert surround the entire upper receiver and support it inside and out to make rebarreling the ar-15/m16 an easy, one-man job. Lets you firmly secure a mil-spec carry handle receiver or mil-spec flattop receiver in a large bench vise for barrel removal/installation. Torque generated while tightening the barrel nut is transmitted to the block and insert, n mfg: brownells specs: injection-molded rynite, black. Fits a1, a2, and standard flattop receivers. Block, 2.5" (6.3cm) thick, 3.5" (8.8cm) wide, 4.5" (11.4cm) high. Insert, 8" (20cm) long, 1" (2.5cm) diameter. Torque tested to 200 ft. Lbs. US specification & reliable quality rifle bench & vise blocks by Brownells. Part Nr: 080-000-661.
More Details : click here
SEARCH this site : click here
|
|
|
Geissele Automatics Ar 15/M4 Reaction Block (Mil Spec Buffer Tube Only) US Specifications
USD 87.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks US Specifications
Technical data & information: The geissele reaction block is designed to aid in the assembly of lower receivers. Once the armorer has installed the buffer tube onto the lower; the buffer tube and lower receiver assembly can be slid into the reaction block at the 12, 3, 6 and 9 o'clock positions. This allows the armorer to rotate the lower in 90 degree increments in the block simply by loosening the provided nylon screws, removing the lower, and sliding it back in at the desired orientation. The reaction block provides an ultra-stable platform for performing an array of lower receiver operations, as well as making the installation of the buffer retainer nut quick and easy. All while keeping both hands of the armo mfg: geissele automatics llc. US specification & reliable quality rifle bench & vise blocks by Geissele. Part Nr: 5314.
More Details : click here
SEARCH this site : click here
|
|
|
The Device Manufacturing Ar 15/M16 Upper Receiver Fixture Mk1mod0 Device US Specifications
USD 299.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks US Specifications
Technical data & information: Professional grade ar upper receiver fixture. Robust fixture designed for years of hard use. Quick, intuitive interface that allows rapid building/rebuilding and repair of the entire upper receiver of the ar15/m16/m4 family of rifles/carbines/pistols. Designed to allow all upper receiver parts to be installed or removed without interference. Designed with rail systems in mind, the device has clearance for most rail systems to allow installation and removal while the upper is securely held. Holds receiver from the inside via the bolt carrier raceway and charging handle raceway by way of a "t" interface. Front and rear lugs are controlled along with the entire bottom receiver flat mfg: the device manufacturing llc. US specification & reliable quality rifle bench & vise blocks by Device. Part Nr: MK1MOD0DEVICE.
More Details : click here
SEARCH this site : click here
|
|
|
Tangodown Armorer's Blocks Scar Armorer's Block Set US Specifications
USD 181.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks US Specifications
Technical data & information: High-density polymer blocks allow critical subassemblies of the sof command assault rifle (scar) to be tightly clamped in a vise without danger of crushing, twisting, or otherwise distorting them. Provides secure support for safe, effective cleaning, adjustment, maintenance, and repair without marring or scratching the finish. Available as a complete set or separate components. Upper receiver/barrel block surrounds the front sight/gas block to securely hold the barrel module while also protecting the exposed portion of the gas system leaving your upper free to be worked on. Lower receiver/trigger module block locks into the magazine well and absorbs all the clamping force to protect the s mfg: tangodown specs: high-density, injection-molded polymer. US specification & reliable quality rifle bench & vise blocks by Tangodown. Part Nr: ABSFNSCAR001.
More Details : click here
SEARCH this site : click here
|
|
|
Sinclair International Ar 15/Ar 10 Ar Vise Blocks Sinclair Ar 10 Vise Block US Specifications
USD 26.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks US Specifications
Technical data & information: The sinclair vise block is the perfect tool for securely holding your ar-15/ar-10 in a bench vise. The vise block inserts into your magazine well just like a magazine and the bottom half of the block can be clamped into a vise. You can tilt the block in the vise to work at a different angle if desired. You can also insert the vise block into the top of the lower assembly allowing you to work on the bottom side. The vise block is made of machined high density polyethylene, so it is extremely solid. Great workbench tool. Ar-10 model only fits armalite ar-10 pattern rifles, does not fit dpms/sr25 pattern rifles. Mfg: sinclair international. US specification & reliable quality rifle bench & vise blocks by Sinclair. Part Nr: 23150.
More Details : click here
SEARCH this site : click here
|
|
|
Sinclair Ar 15 Bolt Vise US Specifications
USD 18.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks US Specifications
Technical data & information: Our bolt vise helps you disassemble your ar-15 bolt easily and without losing any parts. The main function of the tool is to compress the ejector so you can remove the spring pin easily. This enables you to release the pressure on the ejector slowly so the ejector and spring don't go flying off your workbench. The ejector and spring can be replaced if needed and the bolt reassembled easily. The tool cradles the bolt and holds it firmly in place while the screw assembly compresses the ejector. A hole in the vise allows the pin to drop free. The tool can also be used to hold the bolt securely while replacing gas rings and replacing the extractor. Note: we recommend you replace the ejecto mfg: sinclair international. US specification & reliable quality rifle bench & vise blocks by Sinclair. Part Nr: 14950.
More Details : click here
SEARCH this site : click here
|
|
|
Ergo Grips 308 Ar morers Block US Specifications
USD 21.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks US Specifications
Technical data & information: This is one of the most useful maintenance accessories available for an ar-10. Simply bolt or clamp securely to a bench or other work surface, place an ar 308 rifle onto the block inside the magazine well, and the rifle is held in place for cleaning, maintenance, or storage. 1-piece glass filled polymer design fits rifles that use sr-25 pattern magazines weight: .7oz 6-1/8" tall x 2" long(at the base) x 4-1/4" wide (at the base) 1/4" mounting holes mfg: ergo grips. US specification & reliable quality rifle bench & vise blocks by Ergo. Part Nr: 4989.
More Details : click here
SEARCH this site : click here
|
|
|
Precision Reflex Ar 15/M16 Upper Receiver Vise Block US Specifications
USD 57.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks US Specifications
Technical data & information: Heavy duty, machined aluminum vise block lets you clamp an ar-15/m16 upper receiver in a bench vise without risk of marring the finish or distorting the receiver from over-tightening. Dual-use design allows the receiver to be positioned top side up or, if it's a flattop, upside down; either way, the vise grasps the block and never touches the receiver. One side of the block fits in the underside of the receiver and is held securely in place with two, steel, t-pins inserted through the takedown pin holes, so you can install optics, perform thorough cleaning, and do other work on the exterior. Or, slide a flattop receiver rail into the grooves on the other side of the block and tighten t mfg: precision reflex, inc. Specs: body, aluminum, hardcoat anodized, matte black. 7" (17.8cm) long, 1βό" (3.2cm) wide, 1βό" high. Pins steel, black oxide finish. Fits ar-15/m16/m4 and clones with .250" diameter takedown pin holes. US specification & reliable quality rifle bench & vise blocks by Precision. Part Nr: 50083.
More Details : click here
SEARCH this site : click here
|
|
|
Dpms Ar 15 Upper Receiver Block Dpms .308 Upper Receiver Block US Specifications
USD 71.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks US Specifications
Technical data & information: Machined from tough, long-wearing nylon to hold upper receiver in a bench vise without fear of crushing, marking or scratching the finish. Fits inside stripped or barreled, carry handle and flattop receivers with .250" diameter pivot pins. Holds receivers at any angle for cleaning, or fitting sights and accessories. Models to fit standard ar-15 and dpms ar-style .308 receivers. Mfg: dpms specs: nylon, white. Ar-15, 7" (17.8cm) long, 1" (4.5cm) wide, 2-7⁄8" (7.3cm) high. Dpms .308, 7-3⁄8" (18.7cm) long, 1-7⁄8" (4.8cm) wide, 3" (7.6cm) high. Fits dpms panther ar-style .308 receivers. US specification & reliable quality rifle bench & vise blocks by DPMS. Part Nr: F414637.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Magpul Ar 15 Bev Block Ar15/M4 US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
