Nikon Ar 15/M16 M 223 Scope Mount Ar Style Mount Realtree Max 1 US Specifications
Gun Optics Mount Sets by Nikon
|
Technical data & information: The nikon p-series scope mount offers ar-15 owners a wide range of flexibility in their optics mounting, enabling them to select two different mounting points for front and rear rings, unlike one-piece optics mounts. The nikon p-series scope mount uses a two-piece reversible design, which allows for use with a wide range of optics. The mounts can also be positioned at different points on the rail for added flexibility. Features flat-dark earth finish or black finish height: 1.4 inches fits 1-inch diameter tubes designed for use with picatinny rails the nikon p-series scope mount also allows the charging handle on ar rifles to remain accessible. Mfg: nikon specs: aluminum, hardcoat anodized, matte black (mb), realtree max-1 (max) or mossy oak brush (brush) camouflage. Steel mounting hardware, black oxide finish. 5" (12.7cm) o.A.L. 3ß½" (8.9cm) center-to-center ring spacing; 3.125" (8cm) between ring edges. Requir. US specification & reliable quality gun optics mount sets by Nikon. Part Nr: 837.
 Indicative Price: USD 119.95
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more high specification gun & shooting items : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Zro Delta Dloc M2 Scope Mount 30mm Dloc M2 Scope Mount US Specifications
USD 152.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: With three steel crossbolts for recoil lugs and a spring-loaded side-clamping bar, zrodelta's dloc-m2 30mm optic mount grips your picatinny rail like a kid squeezing your hand on the first day of kindergarten. It's easy to attach: just loosen the nut and push out the clamping bar, position the mount and let it snap down tightly on your rifle's top rail. Then just tighten the screw by hand for a solid retention with qd like flexibility, or grab a wrench and tighten it to spec for a non-qd installation. The dloc-m2's single integral scope ring makes it ideal for mounting short tactical optics with 30mm tubes. It has an extra-wide contact area and four cap screws mfg: zro delta. US specification & reliable quality gun optics mount sets by ZRO Delta. Part Nr: 7.024E+11.
More Details : click here
SEARCH this site : click here
|
|
|
Talley Encore Rings & Base Tc Encore Omega/Triumph/Pro Hunter 1" Medium Scope Mount US Specifications
USD 52.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: One-piece ring and base eliminates the joint between the ring and base to provide a rigid mounting platform that reduces ring alignment problems and prevents kinking a scope. Surprisingly lightweight yet durable, machined from high-grade aluminum, these rings won't add a lot of extra weight that can bog you down at the range or in the field. Accepts 1" diameter scope tubes. Mfg: talley specs: extruded, cnc machined 7000 series aluminum, black. Fits scopes with 1" diameter tubes. Low, fits scopes up to 44 mm objective with standard barrel contour. Medium, fits scopes up to 50 mm objective with standard barrel contour. High, fits scopes with a 56 mm objective with standar. US specification & reliable quality gun optics mount sets by Talley. Part Nr: 940724.
More Details : click here
SEARCH this site : click here
|
|
|
Warne Mfg. Company Ar 15/M16 R.A.M.P. Tactical Mount Tactical R.A.M.P Mount 34mm Black US Specifications
USD 175.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: The rapid acquisition multisight platform (r.A.M.P.) is a one-piece cantilever mount with integral scope rings that positions optics farther forward to provide 1" of extra space at the rear for mounting a long eye relief scope, night vision device, or magnifier. Features removable mil-std 1913 picatinny rails on the left and right sides that let you mount secondary sights 45 off-axis from the main optic. Each top ring strap is secured with four torx screws for recoil-proof holding power. Two large hex nuts and 3" long steel clamping bar lock the mount to a picatinny receiver rail. Smooth contours and radiused edges give a streamlined appearance, reduce weight, and prevent snagging. Model mfg: warne mfg. Company specs: 6061 t6 aluminum, hardcoat anodized, and steel hardware, magnesium phosphate finish, matte black. 71/8" (18.1cm) long, 23⁄8" (6cm) wide, 2βό" (5.7cm) high. Height measured from top of rail to bottom of ring: .75" (1.9cm). Approximately 9.7 oz. (275g) wei. US specification & reliable quality gun optics mount sets by Warne. Part Nr: RAMP34.
More Details : click here
SEARCH this site : click here
|
|
|
Spuhr Accuracy International Isms Direct Mounts 34mm Isms Direct Mount 121mm Mounting Length 20.6 Moa US Specifications
USD 410
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: This version of the spuhr isms scope mount attaches directly to the scope rails on accuracy international rifle chassis systems, no need for drilling, tapping, or separate rings-and-base. The ideal scope mount system is a revolutionary scope mount with multiple attachment points for accessories like red dot sights, angle / cosine indicators, and other add-ons needed by precision rifle shooters. The built-in level helps prevent you from canting the rifle and compromising accuracy. The entire isms is machined from a single piece of aluminum billet, ensuring it will not flex under heavy recoil. This sturdiness protects the scope from slipping out of alignment under recoil or, worse, be mfg: spuhr. US specification & reliable quality gun optics mount sets by Spuhr. Part Nr: SA4601.
More Details : click here
SEARCH this site : click here
|
|
|
American Defense Manufacturing Ad Scout Optics Mount 30mm Scout Mount No Offset US Specifications
USD 142.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: One-piece integral base and rings designed for traditional optics or similar sights that require two, 30mm rings for additional support. Available in three different lengths for proper eye relief adjustment. Ad-scout-s is standard length for mounting traditional optics. Ad-scout cantilever positions optics farther forward to provide 1" of extra space at the rear for mounting night-vision devices or when additional eye-relief is needed. Ad-scout-x uses the same great cantilever design as the ad-scout cantilever, but position's optics 2" farther forward for maximum room at the rear for mounting night-vision devices or making eye-relief adjustments. Mfg: american defense manufacturing specs: 6061 t6 aluminum, hardcoat t3 mil-spec anodized, matte black. Height measured from top of rail to bottom of scope body, .87" (2.2cm) high. Distance between rings, 2" (6.3cm.) high. 7.1 ounces (201g) weight. Ad-scout, s, 4" (11.4 cm) oal. Ad-scout cantilever, 6" (15.2cm) oal. Ad-scout -. US specification & reliable quality gun optics mount sets by American Defense. Part Nr: ADSCOUTS30STD.
More Details : click here
SEARCH this site : click here
|
|
|
Talley Light Weight Scope Mount Remington 700/725 Sa Low 1" Scope Mounts 20 Moa US Specifications
USD 69.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: One-piece construction blends the ring and base into a single unit. Eliminating the ring/base joint not only keeps weight to a minimum, it provides a stronger mount. Each ring cap is 5⁄8" wide, with four, torx screws, to keep large scopes from slipping or shifting. Designed by mel forbes of new ultralight arms. Mfg: talley specs: 7000 series aluminum, black, anodized, matte finish. Accepts 1" dia. Scopes, unless otherwise listed in fits column for 30mm dia. Scopes. Height from bottom of ring to top of receiver: low, .400" (10.1mm), med, .500" (12.7mm). High, .640" (16.3mm), x‑high, .740" (18.8mm). Approx. We. US specification & reliable quality gun optics mount sets by Talley. Part Nr: 930700SM.
More Details : click here
SEARCH this site : click here
|
|
|
Spuhr Quick Detach Isms Qdp Mount 36mm 1.5" 0 Moa Qdp Mount US Specifications
USD 495
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: The spuhr qdp mount is an extremely sturdy one-piece scope mount that clamps directly to any mil-std 1913 picatinny receiver rail or base. It combines the rock-solid stability of spuhr's proven ideal scope mounting system (isms) with easy-to-operate quick-release levers that let you attach and remove the spuhr qdp mount from your rifle with the mount and the scope as a single unit. The spuhr qdp mount has 45-degree split rings designed so the bulkiest part of the rings is not in your line of sight of the scope turrets. Another innovation is a bubble level built into the base to help you make sure the rifle is perfectly level, helping you control another important variable in lo mfg: spuhr. US specification & reliable quality gun optics mount sets by Spuhr. Part Nr: QDP6002.
More Details : click here
SEARCH this site : click here
|
|
|
Spuhr Isms Quick Detach Qdp Cantilever Mounts 34mm 1.35" 0 Moa Qdp Cantilever Mount US Specifications
USD 495
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: An extremely sturdy mount, the quick detach spuhr qdp cantilever mount clamps directly to any mil-std 1913 picatinny top rail or base, ensuring correct eye relief for your optic. Machined from a single billet of aluminum to resist flexing under recoil, mount has 45β° split rings to eliminate the bulkiest part of the rings from your line of sight with the scope turrets. Includes 10β° wedge to properly align the scope in the rings allows scope to be mounted 1.57" farther forward 1.5" high, 5.94" oal easy-to-operate quick-release levers let you attach and remove the spuhr qdp cantilever mount from your rifle with the mount and the scope as a sin mfg: spuhr. US specification & reliable quality gun optics mount sets by Spuhr. Part Nr: QDP4046.
More Details : click here
SEARCH this site : click here
|
|
|
Warne Mfg. Company Ar 15/M16 R.A.M.P. Tactical Mount Tactical R.A.M.P Mount 34mm Green US Specifications
USD 186.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: The rapid acquisition multisight platform (r.A.M.P.) is a one-piece cantilever mount with integral scope rings that positions optics farther forward to provide 1" of extra space at the rear for mounting a long eye relief scope, night vision device, or magnifier. Features removable mil-std 1913 picatinny rails on the left and right sides that let you mount secondary sights 45 off-axis from the main optic. Each top ring strap is secured with four torx screws for recoil-proof holding power. Two large hex nuts and 3" long steel clamping bar lock the mount to a picatinny receiver rail. Smooth contours and radiused edges give a streamlined appearance, reduce weight, and prevent snagging. Model mfg: warne mfg. Company specs: 6061 t6 aluminum, hardcoat anodized, and steel hardware, magnesium phosphate finish, matte black. 71/8" (18.1cm) long, 23⁄8" (6cm) wide, 2βό" (5.7cm) high. Height measured from top of rail to bottom of ring: .75" (1.9cm). Approximately 9.7 oz. (275g) wei. US specification & reliable quality gun optics mount sets by Warne. Part Nr: RAMP34Z.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells 30mm Ar Style Rifle Cantilever Scope Mount 30mm Cantilever Scope Mount 0 Moa Matte Black US Specifications
USD 119.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: The brownells ar-15 cantilever scope mount is a true one-piece scope mounting solution for your ar-type "modern sporting rifle." it positions the scope forward to give you plenty of eye relief, while it elevates the scope high enough for a comfortable head position and plenty of clearance for the objective bell. Machined from a solid billet of 6061 t6 aluminum, our ar-15 cantilever scope mount is lightweight, strong, and rigid. A pair of hardened steel 1/2" hex nuts provide tremendous locking force to ensure your mount, and the scope attached to it, stays in place. Remove the mount/scope unit from the rifle and reinstall it with little-to-no shift in the scope' mfg: brownells. US specification & reliable quality gun optics mount sets by Brownells. Part Nr: AR30MM0MOA.
More Details : click here
SEARCH this site : click here
|
|
|
Spuhr Isms Picatinny Mounts 36mm 1.18" 0 Moa Unimount US Specifications
USD 410
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: The isms (ideal scope mount system) is an extremely sturdy scope mount, with the possibility to attach multiple optical accessories directly to the mount. Built-in scope level and 45-degree split of the rings provides unobstructed view of your optics knobs. The durable design of the mounts prevents damage to the scope due to flexing during heavy recoil. The rings are grooved on the inside for better grip and the mount base is milled from a sinlge billet of aluminum. Mounts include an innovative tool to index your scope properly to the mount and gun. Mounts have a minimum of 7 interfaces for accessories to be mounted. The rings are cut at a 45 degree angle instead of horizontally, prov mfg: spuhr. US specification & reliable quality gun optics mount sets by Spuhr. Part Nr: SP6001.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Nikon Ar 15/M16 M 223 Scope Mount Ar Style Mount Realtree Max 1 US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
