Redding Body Dies 300 H&H Mag US Specifications
Rifle Dies by Redding
|
Technical data & information: Body dies are designed to full length resize the case body, bump the shoulder position for proper chambering, but not size the neck at all. They are made without internal parts and are intended for resizing cases which have become increasingly difficult to chamber after repeated firing. After using a body die, the case should be run through the neck die to achieve proper neck tension. Sold separately or as part of a set. Mfg: redding. US specification & reliable quality rifle dies by Redding. Part Nr: 75150.
 Indicative Price: USD 84.99
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more high specification gun & shooting items : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Rcbs X Die Mandrel Assembly .223 Rem US Specifications
USD 11.99
(Indicative price - actual current price possibly lower)
Rifle Dies US Specifications
Technical data & information: Trim the case once-never trim again! the x-sizer die looks like a regular full length sizer die. Inside, the die features a specially designed mandrel with an expander ball and decapping pin attached. The mandrel is what the x-die is all about. The patented x-sizer die eliminates the need for repeated trimming after an initial trim of .020" off the maximum case length to standardize the case. The x-die doesn't shorten the length of the case: the mandrel reduces the growth rate as the case grows as a result of the case mouth-contacting the mandrel during sizing. Because of an extremely close tolerance between the mandrel and die neck wall, the neck wall of the case d mfg: rcbs. US specification & reliable quality rifle dies by RCBS. Part Nr: 37214.
More Details : click here
SEARCH this site : click here
|
|
|
Rcbs 30 06 Springfield Neck Die Set US Specifications
USD 39.99
(Indicative price - actual current price possibly lower)
Rifle Dies US Specifications
Technical data & information: For bottleneck cases to be fired in bolt-action rifles only-specifically, cases fired out of a specific rifle and neck-sized to go back into the same rifle. The set consists of a neck sizer die with an expander-decapping unit, and a seater die with bullet seater plug. The neck sizer die resizes the neck only (it doesn't touch the shoulder or body) and de-primes. The included seater die has a built-in roll crimper to secure the bullet at the same time it's seated. Mfg: rcbs. US specification & reliable quality rifle dies by RCBS. Part Nr: 14802.
More Details : click here
SEARCH this site : click here
|
|
|
Redding Neck Sizing Dies 6mm/22 250 Rem US Specifications
USD 123.99
(Indicative price - actual current price possibly lower)
Rifle Dies US Specifications
Technical data & information: The redding neck sizing dies size only the necks of your bottleneck cases to prolong brass like and improve accuracy. It is important that fired cases should never be interchanged between rifles since the neck sizing dies do not size the shoulder or body. Ideal for cartridges used in bolt action rifles. All dies are made using the finest alloy steels obtainable and machined on hardinge super-precision lathes capable of holding the tightest tolerances in the industry. Heat treated in atmospherically controlled furnaces and hand polished for smooth, flawless functioning, these dies will maintain tolerances and last a lifetime. Inspected and ultrasonically cleaned before packaging. Mfg: redding. US specification & reliable quality rifle dies by Redding. Part Nr: 81516.
More Details : click here
SEARCH this site : click here
|
|
|
Redding Seater Dies 30 338 Win Mag US Specifications
USD 50.99
(Indicative price - actual current price possibly lower)
Rifle Dies US Specifications
Technical data & information: The redding seating die includes bullet guide, built-in crimp ring and the proper seating plug. All dies are made using the finest alloy steels obtainable and machined on hardinge super-precision lathes capable of holding the tightest tolerances in the industry. Heat treated in atmospherically controlled furnaces and hand polished for smooth, flawless functioning, these dies will maintain tolerances and last a lifetime. Inspected and ultrasonically cleaned before packaging. Mfg: redding. US specification & reliable quality rifle dies by Redding. Part Nr: 92394.
More Details : click here
SEARCH this site : click here
|
|
|
Lee Precision Rifle Factory Crimp Dies 458 Win Mag Factory Crimp Die US Specifications
USD 13.99
(Indicative price - actual current price possibly lower)
Rifle Dies US Specifications
Technical data & information: Lee factory crimp die crimps the bullet in place more firmly than any other tool tests demonstrate that even bullets which have no crimp groove will shoot more accurately a firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation features a collet that squeezes the case mouth into the crimping groove for a firm hold shellholder not included fits all 7/8"-14 reloading presses mfg: lee precision. US specification & reliable quality rifle dies by Lee. Part Nr: 90969.
More Details : click here
SEARCH this site : click here
|
|
|
Rcbs 7mm 08 Remington Gold Medal Match Bushing Full Length Die 7mm 08 Remington Bushing Full Length Die US Specifications
USD 56.99
(Indicative price - actual current price possibly lower)
Rifle Dies US Specifications
Technical data & information: The 7mm-08 remington gold medal match series comprises the finest reloading dies built by rcbs. The full-length sizer die features a self-centering changeable neck bushing that lets reloaders precisely set the amount of case neck tension on the bullet. This reduces work hardening of the case neck brass, prolonging case life and increasing accuracy. However, getting these benefits requires the use of high-end brass with consistent neck thicknesses. By removing the neck bushing, the full length sizing die can also be used as a bump die to set headspace back the desired amount. Neck bushings (sold separately) are required and are available in .001-inch increments from .189-inch to .365-inch. Mfg: rcbs. US specification & reliable quality rifle dies by RCBS. Part Nr: 13934.
More Details : click here
SEARCH this site : click here
|
|
|
Whidden Gunworks Full Length Sizer And Seater Dies Sets Full Length Sizer And Seater Set 6.5x47mm Lapua US Specifications
USD 197.99
(Indicative price - actual current price possibly lower)
Rifle Dies US Specifications
Technical data & information: Whiddens' hand-polished bushing sizer dies have a shorter overall length for better shoulder bump back, a smaller base and tighter internal tolerances. All of the sizer dies include a shoulder datum collar to measure shoulder bump and headspace. The sizing dies also include a pin retainer should you chose to use the sizer without the expander. Wide knurling on the die make small adjustments simple while the 6-32 machine screw on the lock ring secures the die once the final adjustment is made. The full length bushing die does not include the required bushing. The sizer will accept redding or l.E. Wilson bushings. Mfg: whidden gunworks. US specification & reliable quality rifle dies by Whidden. Part Nr: SETSN06547L000.
More Details : click here
SEARCH this site : click here
|
|
|
Redding Deluxe 3 Die Sets 223 Rem US Specifications
USD 81.99
(Indicative price - actual current price possibly lower)
Rifle Dies US Specifications
Technical data & information: The redding deluxe die sets include the full length sizing die, standard seating die and the neck sizing die. All dies are made using the finest alloy steels obtainable and machined on hardinge super-precision lathes capable of holding the tightest tolerances in the industry. Guaranteed to produce ammunition that will properly fit any standard (saami) chamber. Heat treated in atmospherically controlled furnaces and hand polished for smooth, flawless functioning, these dies will maintain tolerances and last a lifetime. Inspected and ultrasonically cleaned before packaging, the come in a handy die box with a spare decapping pin, hex wrench and a place for your shellholder (sold separately). Mfg: redding. US specification & reliable quality rifle dies by Redding. Part Nr: 84111.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Redding Body Dies 300 H&H Mag US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
