Redding Body Dies 338 Lapua Mag US Specifications
Rifle Dies by Redding
|
Technical data & information: Body dies are designed to full length resize the case body, bump the shoulder position for proper chambering, but not size the neck at all. They are made without internal parts and are intended for resizing cases which have become increasingly difficult to chamber after repeated firing. After using a body die, the case should be run through the neck die to achieve proper neck tension. Sold separately or as part of a set. Mfg: redding. US specification & reliable quality rifle dies by Redding. Part Nr: 75594.
 Indicative Price: USD 49.99
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more high specification gun & shooting items : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Forster Bench Rest Seater Dies 257 Ackley (40) US Specifications
USD 66.99
(Indicative price - actual current price possibly lower)
Rifle Dies US Specifications
Technical data & information: Forster bench rest reloading dies are of excellent quality and provide the reloader with the ability to produce concentric rounds time and time again. Each die is manufactured from the finest quality steel carefully machined to very tight tolerances. Dies are hand polished both before and after the heat-treating process to guarantee an extra fine finish. All forster reloading dies feature their forster cross bolt die locking ring that tightens the two ends of the split ring instead of tightening a screw directly into the threads of the die. Forster bench rest seater dies were the first of their kind to utilize a close fitting chamber that holds the case, the bullet and the seating stem mfg: forster. US specification & reliable quality rifle dies by Forster. Part Nr: 23921.
More Details : click here
SEARCH this site : click here
|
|
|
L.E. Wilson Stainless Nk Dies Stainless Neck Die 30 Ihmsa US Specifications
USD 51.99
(Indicative price - actual current price possibly lower)
Rifle Dies US Specifications
Technical data & information: These stainless steel neck dies from l.E. Wilson are the most accurate and easiest to use straight line dies on the market. These companion stainless steel neck dies are identical to standard wilson neck dies except the body and decap pin are stainless. Neck dies accept wilson, redding, or our carbide bushing. These dies are beautifully made, accurate and will never rust or corrode. Be sure to order the sinclair neck die base (apb) for arbor press use. Mfg: l.E. Wilson, inc. US specification & reliable quality rifle dies by L.E. Wilson. Part Nr: SNDIMS.
More Details : click here
SEARCH this site : click here
|
|
|
Redding Body Dies 243 Wssm US Specifications
USD 49.99
(Indicative price - actual current price possibly lower)
Rifle Dies US Specifications
Technical data & information: Body dies are designed to full length resize the case body, bump the shoulder position for proper chambering, but not size the neck at all. They are made without internal parts and are intended for resizing cases which have become increasingly difficult to chamber after repeated firing. After using a body die, the case should be run through the neck die to achieve proper neck tension. Sold separately or as part of a set. Mfg: redding. US specification & reliable quality rifle dies by Redding. Part Nr: 75270.
More Details : click here
SEARCH this site : click here
|
|
|
Lee Precision Rifle Factory Crimp Dies 22 Hornet Factory Crimp Die US Specifications
USD 13.99
(Indicative price - actual current price possibly lower)
Rifle Dies US Specifications
Technical data & information: Lee factory crimp die crimps the bullet in place more firmly than any other tool tests demonstrate that even bullets which have no crimp groove will shoot more accurately a firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation features a collet that squeezes the case mouth into the crimping groove for a firm hold shellholder not included fits all 7/8"-14 reloading presses mfg: lee precision. US specification & reliable quality rifle dies by Lee. Part Nr: 90829.
More Details : click here
SEARCH this site : click here
|
|
|
Redding Case Forming Dies 17 Ackley Hornet From 22 Hornet Form #1 US Specifications
USD 87.99
(Indicative price - actual current price possibly lower)
Rifle Dies US Specifications
Technical data & information: Case forming dies are for those who wish to form brass cases from one caliber to another. Most case forming is done to produce ammunition that is not factory available. All wildcat cartridges and many obsolete calibers fall into this category. Case forming dies are designed to change the shape of the original parent case in small increments to avoid overworking the brass and to prolong case life. After using the proper form dies and/or form & trim die, full length resizing is required. Mfg: redding. US specification & reliable quality rifle dies by Redding. Part Nr: 90500.
More Details : click here
SEARCH this site : click here
|
|
|
Redding Neck Sizing Dies 370 Sako Mag US Specifications
USD 107.99
(Indicative price - actual current price possibly lower)
Rifle Dies US Specifications
Technical data & information: The redding neck sizing dies size only the necks of your bottleneck cases to prolong brass like and improve accuracy. It is important that fired cases should never be interchanged between rifles since the neck sizing dies do not size the shoulder or body. Ideal for cartridges used in bolt action rifles. All dies are made using the finest alloy steels obtainable and machined on hardinge super-precision lathes capable of holding the tightest tolerances in the industry. Heat treated in atmospherically controlled furnaces and hand polished for smooth, flawless functioning, these dies will maintain tolerances and last a lifetime. Inspected and ultrasonically cleaned before packaging. Mfg: redding. US specification & reliable quality rifle dies by Redding. Part Nr: 81456.
More Details : click here
SEARCH this site : click here
|
|
|
Redding Seater Dies 30 Rem US Specifications
USD 63.99
(Indicative price - actual current price possibly lower)
Rifle Dies US Specifications
Technical data & information: The redding seating die includes bullet guide, built-in crimp ring and the proper seating plug. All dies are made using the finest alloy steels obtainable and machined on hardinge super-precision lathes capable of holding the tightest tolerances in the industry. Heat treated in atmospherically controlled furnaces and hand polished for smooth, flawless functioning, these dies will maintain tolerances and last a lifetime. Inspected and ultrasonically cleaned before packaging. Mfg: redding. US specification & reliable quality rifle dies by Redding. Part Nr: 92392.
More Details : click here
SEARCH this site : click here
|
|
|
Rcbs Bullet Seater Dies 325 Wsm US Specifications
USD 26.99
(Indicative price - actual current price possibly lower)
Rifle Dies US Specifications
Technical data & information: Rcbs bullet seaters may also be purchased separately. Some reloaders like to have a separate seater die adjusted for each different bullet they shoot, or for different rifles of the same cartridge. Rcbs seater dies have built-in taper or roll crimp ring appropriate for the cartridge. Seater dies are packed in an rcbs plastic die box and will fit any 7/8 to 14 reloading press. Mfg: rcbs. US specification & reliable quality rifle dies by RCBS. Part Nr: 31638.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Redding Body Dies 338 Lapua Mag US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
