Rifle Rail Covers US Specifications
| Page 2
|
|
|
 Magpul Ar 15 Picatinny Xtm Enhanced Rail Panel Polymer Xtm Enhanced Rail Panel Picatinny Polymer Black 1.5" US Specifications
USD 7.55
(Indicative price - actual current price possibly lower)
Technical data & information: The xtm enhanced rail panels are low-profile, two-piece covers that attach anywhere on a 1913 picatinny rail without having to remove previously mounted accessories. Replacing the original xtm panels, the enhanced xtm panels feature an aggressive anti-slip texture and dual-side routing clips for retention of light/laser cables. The design and reinforced material construction ensure the panels will remain in place under all operating conditions, but allows for easy removal using the tips of two rounds when necessary. Eight section will make four panels that cover one side of a carbine-length rail. Available in black, flat dark earth, and od green. Mfg: magpul specs: fits 1913 picatinny rails. US specification & reliable quality rifle rail covers by Magpul. Part Nr: MAG510BLK.
More Details : click here
SEARCH this site : click here
|
|
|
Magpul Ar 15 Direct Thread Xtm Handstop Kit Polymer Flat Dark Earth US Specifications
USD 18.95
(Indicative price - actual current price possibly lower)
Technical data & information: The 4-piece xtm hand stop kit serves as a lightweight, low-profile rail mounted index point for improved weapon control, or as a forward stop to prevent the shooter's hand from reaching the hot front sight assembly or muzzle. The kit includes one hand stop, one index panel, one full xtm enhanced panel, and one xtm enhanced half panel. Available in black, flat dark earth or od green. Mfg: magpul. US specification & reliable quality rifle rail covers by Magpul. Part Nr: MAG511FDE.
More Details : click here
SEARCH this site : click here
|
|
|
Bravo Company Ar 15 Keymod Rail Panel Kit 5 Pack Rubber Rail Panel Kit 5 Pack Keymod Rubber Black 5.5" US Specifications
USD 9.95
(Indicative price - actual current price possibly lower)
Technical data & information: Made to fit all keymod mounting surfaces with seven (7) consecutive keymod slots. Ultra-slim and radiused surface to allows a "round" handguard feeling, from an octagonal profile. Aggressive non-slip or non-reflective surface. Ventilated for cooling. Bi-directional. Locking tabs on either end, depending which direction they are installed. Measurements: length 5.550", width 0.625 ", thickness 0.100" can be cut to any length, depending on users requirements. Made in the u.S.A. Of a high-strength polymer material. Each kit contains five (5) matching color keymod p mfg: bravo company specs: length: 5.550", width: .625", thickness: .100", 5 pack. US specification & reliable quality rifle rail covers by Bravo. Part Nr: BCMKMRRPBLK5.
More Details : click here
SEARCH this site : click here
|
|
|
Tangodown Fn Scar Picatinny Battle Rail Cover Polymer Battle Rail Cover Picatinny Polymer Dark Earth 4" US Specifications
USD 16.99
(Indicative price - actual current price possibly lower)
Technical data & information: Dual-purpose cover slides on and snaps into place on any picatinny handguard rail. Protects the machined surfaces while offering a secure, non-slip gripping surface for maximum weapon control. Impact and heat resistant for years of rugged use. Scar is based on feedback from special forces operators using the new fn scar rifle, with a lower profile and more aggressive texture than bgr models. Available in 4" lengths. Mfg: tangodown specs: injection-molded polymer resin, black or dark earth. 1-3/8" (3.5cm) wide. Lengths as indicated in table. Bgrp accepts surefire, insight technologies, and similar pressure switches measuring approx. 3-1/8" (7.9cm) long x 7⁄8" (2.2cm) wide or 2-5&fr. US specification & reliable quality rifle rail covers by Tangodown. Part Nr: SC004FDE.
More Details : click here
SEARCH this site : click here
|
|
|
Magpul Ar 15 M Lok Rail Cover Type 2 Polymer Rail Cover Type 2 M Lok Polymer Flat Dark Earth 1.5" US Specifications
USD 12.3
(Indicative price - actual current price possibly lower)
Technical data & information: M-lok type 2 rail covers are low-profile, two-piece covers that install directly onto m-lok compatible systems. These m-lok covers are non-orientation specific which allow the user to mount them in any direction desired without affecting function. The contact surfaces on these covers are textured using the magpul tsp texture for additional grip, adding slightly more than 1/8" from the mounting surface, these covers also feature a beveled contour to minimize potential snagging. The locking tab is pre-scored down the center to allow the user to snap off sections and mix and match colors for a more custom look. Includes six panels. Each covering one m-lok slot. Mfg: magpul specs: fits- m-lok handguards. US specification & reliable quality rifle rail covers by Magpul. Part Nr: MAG603FDE.
More Details : click here
SEARCH this site : click here
|
|
|
Magpul Ar 15 Picatinny Xtm Enhanced Rail Panel Polymer Xtm Enhanced Rail Panel Picatinny Polymer Gray 1.5" US Specifications
USD 7.55
(Indicative price - actual current price possibly lower)
Technical data & information: The xtm enhanced rail panels are low-profile, two-piece covers that attach anywhere on a 1913 picatinny rail without having to remove previously mounted accessories. Replacing the original xtm panels, the enhanced xtm panels feature an aggressive anti-slip texture and dual-side routing clips for retention of light/laser cables. The design and reinforced material construction ensure the panels will remain in place under all operating conditions, but allows for easy removal using the tips of two rounds when necessary. Eight section will make four panels that cover one side of a carbine-length rail. Available in black, flat dark earth, and od green. Mfg: magpul specs: fits 1913 picatinny rails. US specification & reliable quality rifle rail covers by Magpul. Part Nr: MAG510GRY.
More Details : click here
SEARCH this site : click here
|
|
|
Tangodown Fn Scar Picatinny Battle Rail Cover Polymer Battle Rail Cover Picatinny Polymer Black 6" US Specifications
USD 16.99
(Indicative price - actual current price possibly lower)
Technical data & information: Dual-purpose cover slides on and snaps into place on any picatinny handguard rail. Protects the machined surfaces while offering a secure, non-slip gripping surface for maximum weapon control. Impact and heat resistant for years of rugged use. Scar is based on feedback from special forces operators using the new fn scar rifle, with a lower profile and more aggressive texture than bgr models. Available in 6" length. Mfg: tangodown specs: injection-molded polymer resin, black or dark earth. 1-3/8" (3.5cm) wide. US specification & reliable quality rifle rail covers by Tangodown. Part Nr: SC006BLK.
More Details : click here
SEARCH this site : click here
|
|
|
Ergo Grips Ar 15 M Lok Wedgelock Rail Cover Polymer Dark Earth 6.25" US Specifications
USD 19.95
(Indicative price - actual current price possibly lower)
Technical data & information: The ergo m-lok wedgelok slot cover grips are made to fit the mlok hand guards. They are made of santoprene rubber and provide a non-slip gripping surface. They are low profile with an aggressive texture. Each slot cover grip will cover 4 mlok slots. There are 4 covers per package. Mfg: ergo grips specs: santoprene construction, heat resistant, positive non slip gripping surface, low profile with aggressive texture, covers 4 mlok slots, 6 1/4" long and 5/8' wide. US specification & reliable quality rifle rail covers by Ergo. Part Nr: 43324PKDE.
More Details : click here
SEARCH this site : click here
|
|
|
Ergo Grips Ar 15 Ergo Surestop Picatinny Handstop Polymer Black US Specifications
USD 12.99
(Indicative price - actual current price possibly lower)
Technical data & information: During competition or a tactical situation, you can't afford to lose time fumbling to position your hand on the forearm, or, worse yet, have it slide off when racking a pump action shotgun. These ergonomically shaped handstops attach to a picatinny rail forend to provide precise, tactile indexing of the support hand, so you keep your eyes on the target while mounting the weapon. Helps keep hand in position during recoil, too, for fast follow-up shots. Molded-polymer snap-on stop snaps securely into a single rail slot. Rubber-coated surestop protects the hand and resists snagging on other gear. Dual cross-bolts clamp the stop tightly to the rail for a solid, movement-free installatio mfg: ergo grips specs: snap-on, molded polymer, black. 1ß?" (3.2cm) wide, β½" (1.2cm) thick. Sold in 2-pak. Surestop, synthetic-rubber coated molded polymer, black. Steel cross-bolts, oxide finish, matte black. 1ß?" long x 1βό" wide at base. Extends 1βύ" (. US specification & reliable quality rifle rail covers by Ergo. Part Nr: 4201SSBK.
More Details : click here
SEARCH this site : click here
|
|
|
Magpul Ar 15 Direct Thread Xtm Handstop Kit Polymer O.D. Green US Specifications
USD 18.95
(Indicative price - actual current price possibly lower)
Technical data & information: The 4-piece xtm hand stop kit serves as a lightweight, low-profile rail mounted index point for improved weapon control, or as a forward stop to prevent the shooter's hand from reaching the hot front sight assembly or muzzle. The kit includes one hand stop, one index panel, one full xtm enhanced panel, and one xtm enhanced half panel. Available in black, flat dark earth or od green. Mfg: magpul. US specification & reliable quality rifle rail covers by Magpul. Part Nr: MAG511ODG.
More Details : click here
SEARCH this site : click here
|
|
|
Troy Industries Ar 15 Squid Grip Alpha & Delta Rail Cover Rubber Black 4.5" US Specifications
USD 27.99
(Indicative price - actual current price possibly lower)
Technical data & information: Heat-resistant rubber rail covers quickly snap into the circular cooling holes on troy modular rail-and-chassis systems to provide you with a extra-comfortable, greatly improved grip while keeping added bulk to an absolute minimum. Each cover fills 6 holes and may be cut down to shorter lengths or installed end-to-end for longer lengths. Mfg: troy industries, inc. Specs: heat-resistant rubber, black. One strip measures 4.5" (11.4cm) long. Fits troy trx-extreme, alpha, and delta rails. 7 strips per pak. US specification & reliable quality rifle rail covers by Troy. Part Nr: SSQD7PK00BT00.
More Details : click here
SEARCH this site : click here
|
|
|
Troy Industries Ar 15 Picatinny Battle Rail Cover 3 Pk Polymer Battle Rail Cover 3 Pk Picatinny Polymer Black 6" US Specifications
USD 21.99
(Indicative price - actual current price possibly lower)
Technical data & information: Molded polymer cover slides over any picatinny handguard rail to provide a comfortable, secure grasping surface. Protects the hand from sharp rail edges and barrel heat during long shooting sessions. Molded-in knurled bands enhance your grip, especially when hand is wet, and match the troy modular combat grip to give your rifle a neat, unified appearance. No struggling to stretch the cover over the rail: simply pop up the retaining clip, slide on rail, and close the positive-locking clip to keep the cover firmly in place. Sold in 3-paks. Mfg: troy industries, inc. Specs: polymer, black. 6-1/8" (15. 6cm) long, 17⁄16" (2.6cm) wide. 1 oz. (28.3g) weight. Sold in 3-paks. US specification & reliable quality rifle rail covers by Troy. Part Nr: SCOVBRC36BT00.
More Details : click here
SEARCH this site : click here
|
|
|
Bravo Company Ar 15 Keymod Rail Panel Kit 5 Pack Rubber Rail Panel Kit 5 Pack Keymod Rubber Flat Dark Earth 5.5" US Specifications
USD 9.95
(Indicative price - actual current price possibly lower)
Technical data & information: Made to fit all keymod mounting surfaces with seven (7) consecutive keymod slots. Ultra-slim and radiused surface to allows a "round" handguard feeling, from an octagonal profile. Aggressive non-slip or non-reflective surface. Ventilated for cooling. Bi-directional. Locking tabs on either end, depending which direction they are installed. Measurements: length 5.550", width 0.625 ", thickness 0.100" can be cut to any length, depending on users requirements. Made in the u.S.A. Of a high-strength polymer material. Each kit contains five (5) matching color keymod p mfg: bravo company specs: length: 5.550", width: .625", thickness: .100", 5 pack. US specification & reliable quality rifle rail covers by Bravo. Part Nr: BCMKMRRPFDE5.
More Details : click here
SEARCH this site : click here
|
|
|
Magpul Ar 15 Picatinny Rail Cover Polymer Rail Cover Picatinny Polymer O.D. Green 6.25" US Specifications
USD 11.35
(Indicative price - actual current price possibly lower)
Technical data & information: Tough, polymer cover slides over picatinny rails to protect shooter's hand from sharp edges of unused rails, and shield exposed rails from damage during rough tactical operations. Makes rail less likely to snag clothing and equipment and gives the rounded contour of a smooth, circular handguard with the freedom to reconfigure accessories whenever you need to. Rubber-like, pebble-texture grip surface helps shooter maintain better weapon control. Each panel covers 15 rail slots-the correct length to fit many carbine-length handguards without modification. Pre-segmented construction for ease in cutting to length to custom fit on other handguards. Multiple sections can be mounted one mfg: magpul specs: synthetic polymer, matte black pebble finish. 6ß?" (15.9cm) long x 1-3⁄8" (3.5cm) wide. Fits picatinny and weaver-style accessory rails. Covers 15 rail slots. US specification & reliable quality rifle rail covers by Magpul. Part Nr: MAG012ODG.
More Details : click here
SEARCH this site : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Rifle Rail Covers US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
