Rifle Recoil Buffers US Specifications
| Page 2
|
|
|
 Spikes Tactical Ar 15/M16 Carbine Recoil Buffers St T3 Extra Heavy Buffer US Specifications
USD 42.99
(Indicative price - actual current price possibly lower)
Technical data & information: Machined aluminum recoil buffer comes in three weights, so you can select the buffer that gives the best combination of recoil control and reliability in your carbine with an m4-type adjustable stock. All have a mil-spec polyurethane bumper, durable hard-anodized finish, and the spike's logo. St-t1 is a standard-weight (3 oz.) buffer filled with low-density tungsten powder (ldtp) that eliminates the noise and shock caused by the hard reciprocating weights found in the original-style factory buffer. Aids in smoother cycling and helps minimize bolt bounce. St-t2 is filled with high-density tungsten powder (hdtp) for extra weight (4.1 oz.) behind the carrier to reduce cycle rate. Help you mfg: spikes tactical specs: aluminum, hardcoat anodized, black. Polyurethane bumper. 3ß?" (8.2cm) long. St-t1 3 oz. (85g) wt.; st-t2, 4.1 oz. (117g) wt.; st-t3 5.4 oz. (153g) wt. Fits ar-15 carbines with m4-type collapsible stock only. US specification & reliable quality rifle recoil buffers by Spikes. Part Nr: SLA00T3.
More Details : click here
SEARCH this site : click here
|
|
|
Power Custom Ak 47 Recoil Buffer US Specifications
USD 12.99
(Indicative price - actual current price possibly lower)
Technical data & information: Polymer buffer fits on the bolt spring to reduce bolt slap, felt recoil, and overall wear and tear. Provides a cushion that prevents the bolt from making contact with the receiver to reduce wear on both components. Installs easily over rear of spring assembly; no permanent modifications to rifle required. Good for at least 5,000 firing cycles. Mfg: power custom specs: polymer, black. ß½" (1.3cm) long, 15⁄16" (2.4cm) wide, 1βό" (3. 2cm) high. Fits all models of ak-47, mak-90, galil, and valmet. US specification & reliable quality rifle recoil buffers by Power. Part Nr: BTBUF003.
More Details : click here
SEARCH this site : click here
|
|
|
Kyntec Corporation Ar 15/M16/308 Ar Recoil Buffer Ar 15 Fixed Stock Recoil Buffer US Specifications
USD 134.99
(Indicative price - actual current price possibly lower)
Technical data & information: Designed for law enforcement, sportsmen, and competitive shooters alike, these hydraulic buffers help reduce recoil, while diminishing wear and tear on parts. The sealed hydraulic cylinder is made of 17-4 stainless steel and features a nickel-plated cylinder rod with a high-impact striker cap. Hydraulic buffer easily replaces standard mass and spring buffer. Built to mil-spec standards, and u.S. Army tested, these buffers have been demonstrated to reduce cyclic rates, helping save ammunition and improve accuracy. Mfg: kyntec corporation specs: 17-4 stainless steel, sealed hydraulic cylinder. High-impact striker cap. Nickel-plated cylinder rod. Ar-15 carbine buffer, 3.75" oal. Ar-15 fixed stock buffer, 6.25" oal. Ar-.308 shorty collapsible stock buffer, 2.75" oal. Fits dpms and cmmg style m-4 .308. US specification & reliable quality rifle recoil buffers by Kyntec. Part Nr: RB5001.
More Details : click here
SEARCH this site : click here
|
|
|
Spikes Tactical Ar 15/M16 Carbine Recoil Buffers St T2 Heavy Buffer US Specifications
USD 35.99
(Indicative price - actual current price possibly lower)
Technical data & information: Machined aluminum recoil buffer comes in three weights, so you can select the buffer that gives the best combination of recoil control and reliability in your carbine with an m4-type adjustable stock. All have a mil-spec polyurethane bumper, durable hard-anodized finish, and the spike's logo. St-t1 is a standard-weight (3 oz.) buffer filled with low-density tungsten powder (ldtp) that eliminates the noise and shock caused by the hard reciprocating weights found in the original-style factory buffer. Aids in smoother cycling and helps minimize bolt bounce. St-t2 is filled with high-density tungsten powder (hdtp) for extra weight (4.1 oz.) behind the carrier to reduce cycle rate. Help you mfg: spikes tactical specs: aluminum, hardcoat anodized, black. Polyurethane bumper. 3ß?" (8.2cm) long. St-t1 3 oz. (85g) wt.; st-t2, 4.1 oz. (117g) wt.; st-t3 5.4 oz. (153g) wt. Fits ar-15 carbines with m4-type collapsible stock only. US specification & reliable quality rifle recoil buffers by Spikes. Part Nr: SLA00T2.
More Details : click here
SEARCH this site : click here
|
|
|
Kyntec Corporation Ar 15/M16/308 Ar Recoil Buffer Ar 308 Marksman (3.25") Collapsible Stock Recoil Buffer US Specifications
USD 129.99
(Indicative price - actual current price possibly lower)
Technical data & information: Designed for law enforcement, sportsmen, and competitive shooters alike, these hydraulic buffers help reduce recoil, while diminishing wear and tear on parts. The sealed hydraulic cylinder is made of 17-4 stainless steel and features a nickel-plated cylinder rod with a high-impact striker cap. Hydraulic buffer easily replaces standard mass and spring buffer. Built to mil-spec standards, and u.S. Army tested, these buffers have been demonstrated to reduce cyclic rates, helping save ammunition and improve accuracy. Mfg: kyntec corporation specs: 17-4 stainless steel, sealed hydraulic cylinder. High-impact striker cap. Nickel-plated cylinder rod. Ar-15 carbine buffer, 3.75" oal. Ar-15 fixed stock buffer, 6.25" oal. Ar-.308 shorty collapsible stock buffer, 2.75" oal. Fits dpms and cmmg style m-4 .308. US specification & reliable quality rifle recoil buffers by Kyntec. Part Nr: RB5005.
More Details : click here
SEARCH this site : click here
|
|
|
Geissele Automatics Super 42 Braided Wire Spring & Buffer US Specifications
USD 65
(Indicative price - actual current price possibly lower)
Technical data & information: The geissele super 42 spring was designed to improve the function and reliability of your ar-15 pattern rifle. Its unique spring design uses three independent strands of wire, just like the german mg42 machine gun. This concept acts as a harmonic damper and energy absorber by allowing the springs to flex separately from each other. This flex helps displace excess energy which decreases the chance of spring failure and assists with making your ar-15 more reliable. Mfg: geissele automatics llc. US specification & reliable quality rifle recoil buffers by Geissele. Part Nr: 5495.
More Details : click here
SEARCH this site : click here
|
|
|
Kyntec Corporation Ar 15/M16/308 Ar Recoil Buffer Ar 308 Fixed Stock Recoil Buffer US Specifications
USD 134.99
(Indicative price - actual current price possibly lower)
Technical data & information: Designed for law enforcement, sportsmen, and competitive shooters alike, these hydraulic buffers help reduce recoil, while diminishing wear and tear on parts. The sealed hydraulic cylinder is made of 17-4 stainless steel and features a nickel-plated cylinder rod with a high-impact striker cap. Hydraulic buffer easily replaces standard mass and spring buffer. Built to mil-spec standards, and u.S. Army tested, these buffers have been demonstrated to reduce cyclic rates, helping save ammunition and improve accuracy. Mfg: kyntec corporation specs: 17-4 stainless steel, sealed hydraulic cylinder. High-impact striker cap. Nickel-plated cylinder rod. Ar-15 carbine buffer, 3.75" oal. Ar-15 fixed stock buffer, 6.25" oal. Ar-.308 shorty collapsible stock buffer, 2.75" oal. Fits dpms and cmmg style m-4 .308. US specification & reliable quality rifle recoil buffers by Kyntec. Part Nr: RB5006.
More Details : click here
SEARCH this site : click here
|
|
|
Heavy Buffers 308 Ar Car 10 Buffer Car 10 308 Carbine Buffer US Specifications
USD 120.99
(Indicative price - actual current price possibly lower)
Technical data & information: Allows for installation of standard ar15 carbine stock on .308 ars ar-15 buffers are too long and restrict bolt movement on .308 ars with ar-15 stocks simple drop-in installation modified ar-10 buffer spring is recommended for maximum reliability reduces felt recoil compatible with .308 ars ranging from: armalite, dpms, remington, knight's, lmt, larue, pof, mega, fulton, and cmmg 5.5 ounces 303 stainless steel w/ a tungsten anti-bounce counterweight get the modified ar-10 buffer spring. Mfg: heavy buffers. US specification & reliable quality rifle recoil buffers by Heavy Buffers. Part Nr: 100-007-353.
More Details : click here
SEARCH this site : click here
|
|
|
Kyntec Corporation Ar 15/M16/308 Ar Recoil Buffer Ar 15 Carbine Stock Recoil Buffer US Specifications
USD 119.99
(Indicative price - actual current price possibly lower)
Technical data & information: Designed for law enforcement, sportsmen, and competitive shooters alike, these hydraulic buffers help reduce recoil, while diminishing wear and tear on parts. The sealed hydraulic cylinder is made of 17-4 stainless steel and features a nickel-plated cylinder rod with a high-impact striker cap. Hydraulic buffer easily replaces standard mass and spring buffer. Built to mil-spec standards, and u.S. Army tested, these buffers have been demonstrated to reduce cyclic rates, helping save ammunition and improve accuracy. Mfg: kyntec corporation specs: 17-4 stainless steel, sealed hydraulic cylinder. High-impact striker cap. Nickel-plated cylinder rod. Ar-15 carbine buffer, 3.75" oal. Ar-15 fixed stock buffer, 6.25" oal. Ar-.308 shorty collapsible stock buffer, 2.75" oal. Fits dpms and cmmg style m-4 .308. US specification & reliable quality rifle recoil buffers by Kyntec. Part Nr: RB5000.
More Details : click here
SEARCH this site : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Rifle Recoil Buffers US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
