Shooting Flashlight Mounts US Specifications
|
|
|
 Brownells Beretta 92/96 & 1911 Light Rail Mount Aluminum Light Rail Mount US Specifications
USD 49.99
(Indicative price - actual current price possibly lower)
Technical data & information: Add-on light rail makes it cost-effective to convert any 1911 auto-type pistol or early model beretta 92/96 pistol without an integral frame rail to accept a wide assortment of popular weapon lights and lasers. Rail attaches permanently with the supplied screws and acraglas gel to form a seamless mate with the dust cover. Aluminum model keeps aluminum-framed pistols lightweight and maneuverable. Steel version provides extra strength and added weight for improved balance and recoil control, plus it can be welded into place and finish-shaped for a "built-in" appearance on steel framed pistols. Installation requires permanent alteration of the frame and must be completed by a competent gunsmi mfg: brownells specs: aluminum or steel, matte black. 19/16" (4cm) long, 13⁄16" (2.1cm) wide, 3⁄8" (9.5mm) high. Weight: aluminum, .6 oz. (17g). Steel, 1.2 oz. (34g). Fits beretta 92/96 and 1911 auto-type pistols.Slot centers located .510" from each end. US specification & reliable quality shooting flashlight mounts by Brownells. Part Nr: 078-000-076.
More Details : click here
SEARCH this site : click here
|
|
|
Magpul Ar 15 Moe Scout Mount Left Side Model Black US Specifications
USD 9.45
(Indicative price - actual current price possibly lower)
Technical data & information: Clamps to the side slots of the moe forend to enable installation of a surefire scout light or other picatinny-mountable light. Positions light above the forend but as low as possible for easy access and to prevent altering weapon handling characteristics. Models available for right side (1 o'clock) or left side (11 o'clock). Mfg: magpul specs: reinforced, hard-molded polymer, black. Mounting hardware included. US specification & reliable quality shooting flashlight mounts by Magpul. Part Nr: MAG403LTBLK.
More Details : click here
SEARCH this site : click here
|
|
|
Corps Technology Group Benelli Blam Light Mounts Blam 1 Benelli M1 Light Mount US Specifications
USD 38.99
(Indicative price - actual current price possibly lower)
Technical data & information: Laser cut, low carbon steel with a black oxide coating magpul moe l1 3 slot durable polymer rail section maintains sling attachment point on left or right side of shotgun self installation in less than 5 minutes allows you to mount a 1913 picatinny rail compatible weapon light to your benelli m1 or m4 tactical shotgun installation instructions: remove sling from front sling retainer remove the sling plate retainer remove oem sling attachment plate install blam4-orient to preferred side (left or right) reinstall sling plate retainer reinstall sling on blam4 function check mfg: corps technology group. US specification & reliable quality shooting flashlight mounts by Corps. Part Nr: 100-009-756.
More Details : click here
SEARCH this site : click here
|
|
|
Corps Technology Group Benelli Blam Light Mounts Benelli M4 Blam 4 Light Mount US Specifications
USD 48.99
(Indicative price - actual current price possibly lower)
Technical data & information: Laser cut, low carbon steel with a black oxide coating magpul moe l1 3 slot durable polymer rail section maintains sling attachment point on left or right side of shotgun self installation in less than 5 minutes allows you to mount a 1913 picatinny rail compatible weapon light to your benelli m1 or m4 tactical shotgun installation instructions: remove sling from front sling retainer remove the sling plate retainer remove oem sling attachment plate install blam4-orient to preferred side (left or right) reinstall sling plate retainer reinstall sling on blam4 function check mfg: corps technology group. US specification & reliable quality shooting flashlight mounts by Corps. Part Nr: 100-007-661.
More Details : click here
SEARCH this site : click here
|
|
|
Arisaka Defense Inline Ring Mount Keymod Inline Ring Mount Black US Specifications
USD 45
(Indicative price - actual current price possibly lower)
Technical data & information: Securely attaching a 1" light to your handguard is a snap with the arisaka inline ring mount for keymod rails. Arisaka built three positions into the mount that allow you to position the light 0.24" from center in either direction or centered with the mount to clear other accessories. The arisaka inline ring mount is especially useful when you want to mount a 1" light at the 45-degree position on a keymod handguard in the lowest profile way possible thanks to the light being only 0.14" away form the mounting surface. Fits: keymod color: black compatible with any light that has a 1" outer diameter 6061-t6 a mfg: arisaka defense. US specification & reliable quality shooting flashlight mounts by Arisaka. Part Nr: IRMK1.
More Details : click here
SEARCH this site : click here
|
|
|
Wilson Combat Scope Accessory Mount Only US Specifications
USD 63.99
(Indicative price - actual current price possibly lower)
Technical data & information: Compact, rugged mount fully machined from 6061 t6 aluminum clamps directly to any 1" diameter scope tube and provides 13⁄16" of picatinny rail space for mounting a light, red dot sight, laser, or other accessory. Enables quick transition from long-range (scope) targeting to close-range (red dot) simply by shifting your eyes. Durable hardcoat anodized finish resists surface wear and matches most tactical scope finishes. Mfg: wilson combat specs: 6061 t6 aluminum, hardcoat anodized, matte black. 13/16" long rail. Fits 1" scope tube. US specification & reliable quality shooting flashlight mounts by Wilson. Part Nr: TRSAM.
More Details : click here
SEARCH this site : click here
|
|
|
Magpul Ar 15/M16 Moe Illumination Kit US Specifications
USD 18.95
(Indicative price - actual current price possibly lower)
Technical data & information: Easy-to-install kit contains everything you need to mount a picatinny rail-compatible weapon light on a moe handguard. Gives your rifle the versatility of onboard illumination with minimal sacrifice of handguard real estate. Kit includes a short rail section, optional cantilever rail mount, standard pressure switch mount, a mount for a surefire st pressure switch, and all required hardware. Also fits the handguard of a bushmaster acr (adaptive combat rifle). Mfg: magpul specs: reinforced injection-molded polymer, black. Instructions included. US specification & reliable quality shooting flashlight mounts by Magpul. Part Nr: MAG402BLK.
More Details : click here
SEARCH this site : click here
|
|
|
Magpul M Lok Cantilever Rail/Light Mount Black US Specifications
USD 33.2
(Indicative price - actual current price possibly lower)
Technical data & information: Designed for use with all m-lok mounting surfaces, the m-lok aluminum cantilever rail/light mount allows the attachment of various mil-std-1913 picatinny spec rail-mounted accessories such as lights and optics, and directly interfaces with the popular surefire m300/m600 series scout lights or magpul light mount v-block and rings. The cantilever rail/light mount has picatinny slots that extend forward .75"-1.5" past its mounting slot to improve ergonomics and optimize accessory positioning in a wide variety of uses, while keeping lights and accessories low to reduce the weapon's profile. Machined from milspec-anodized aluminum, the cantilever rail/light mount also fea mfg: magpul specs: made in u.S.A. 3 slots, max overall length of 3.15". US specification & reliable quality shooting flashlight mounts by Magpul. Part Nr: MAG588BLK.
More Details : click here
SEARCH this site : click here
|
|
|
Gg&G Mossberg Shockwave 20 Ga Flashlight Mount Mossberg Shockwave 20g Flashlight Mount US Specifications
USD 27.99
(Indicative price - actual current price possibly lower)
Technical data & information: Gg&g's mossberg shockwave flashlight mount is the convenient way to add an illuminator to your tactical / personal-defense shotgun for extra light when clearing a dark room or breeching doors at night. This fully ambidextrous mount fits on either side of the magazine tube to accommodate right- or left-handed shooters, plus the picatinny rail can be rotated to the front or rear for even more flexibility. Fully tested to withstand the rigors of professional law enforcement use sturdy 1-3/4" long picatinny accessory rail installs easily in a few minutes made of as-35 geneva steel & machined 6061 t6 billet aluminum fits 20 gauge mossberg mfg: gg&g, inc. US specification & reliable quality shooting flashlight mounts by GG&G. Part Nr: GGG2085.
More Details : click here
SEARCH this site : click here
|
|
|
Arisaka Defense Offset Scout Mount Mcx Virtus Offset Scout Mount Black US Specifications
USD 45
(Indicative price - actual current price possibly lower)
Technical data & information: Designed especially for the m300 and m600 surefire scout lights, the arisaka offset scout mount for keymod is perfect for mounting a light at the 45-degree position. The mount is also compatible with the arisaka 300 and 600 series lights as well as the streamlight protac rail mount 1, 2, and hl-x lights. The mount replaces the factory picatinny adaptor with a low profile offset mounting option. The arisaka offset scout mount uses bmc's patented inverted keymod screws to keep the mount to a very manageable 0.20" thick. Color: black fits: keymod 6061 t-6 aluminum construction length: 1.265" weight: 0.4 oz the ultra sli mfg: arisaka defense. US specification & reliable quality shooting flashlight mounts by Arisaka. Part Nr: OSMMCX.
More Details : click here
SEARCH this site : click here
|
|
|
Arisaka Defense Offset Picatinny Mount Keymod Offset Picatinny Mount Black US Specifications
USD 60
(Indicative price - actual current price possibly lower)
Technical data & information: Arisaka's offset picatinny mount for keymod is a combination of their well regarded offset scout mount and a picatinny adaptor that offers 4 mounting slots to mount your favorite picatinny based weapon light at the 1:30, 10:30, 4:30, or 6:30 positions. Like all other keymod accessories from arisaka, they use bcm's inverted keymod screws to keep the mount to a mere 0.165" thick. Arisaka builds in 6 lateral positions that give up to 0.5" in order to dial in the position of your accessory exactly. Color: black fits: keymod 6061 t-6 aluminum construction length: 1.77" weight: 1.0 oz the arisaka offset picatinny mo mfg: arisaka defense. US specification & reliable quality shooting flashlight mounts by Arisaka. Part Nr: OPMK.
More Details : click here
SEARCH this site : click here
|
|
|
Daniel Defense Offset Flashlight Mount Assembly Keymod US Specifications
USD 52
(Indicative price - actual current price possibly lower)
Technical data & information: The daniel defense offset flashlight mount is designed for use on the daniel defense slim rail and other keymod rail systems. It is designed so that as the shooters forward hand grips the rail or vertical foregrip, his thumb has quick and perfect access to the rear button of his flashlight. Because the action of activating the light is quick and natural but deliberate, this setup eliminates the chance of unintentional light discharges. This mount is compatible with most common flashlights which have a 1" diameter battery tube. The offset flashlight mount now utilizes keymod mounting system creating a robust and streamlined mount. 6061-t6 aluminum type mfg: daniel defense. US specification & reliable quality shooting flashlight mounts by Daniel. Part Nr: 302007128.
More Details : click here
SEARCH this site : click here
|
|
|
Novak 1911 Tactical Light Rail Stainless Steel Tactical Light Rail US Specifications
USD 59.99
(Indicative price - actual current price possibly lower)
Technical data & information: Low-profile accessory mount attaches to underside of receiver in front of triggerguard for ultra-secure mounting of tactical lights and laser aiming devices. Gets light/laser close to the bore axis for accurate aiming, with controls in easy reach of support hand. Four precision machined slots accept any accessory designed to fit a mil-std 1913 picatinny rail. Beveled and dehorned for snag-free operation; extends only " below frame to allow easy fit in any holster designed for use with light/laser-equipped pistols. Available in blued carbon steel, matte gray stainless steel, or extremely lightweight aluminum with matte black anodized finish. Mounts using three super-strong, heat-hardened hex mfg: novak specs: steel, carbon steel, blued, or stainless, matte gray finish. 1.3 oz. (36g) weight. Aluminum, anodized, matte black. .4 oz. (12g). All models 2.18" (5.5cm) long, .835" (2.1cm) wide. Extends approx. " (6.4mm) below frame when installed. Drilling and tapping of frame required. Includes mounti. US specification & reliable quality shooting flashlight mounts by Novak. Part Nr: 1911RAILSS.
More Details : click here
SEARCH this site : click here
|
|
|
Viking Tactics Light Mount Green Olive US Specifications
USD 24.99
(Indicative price - actual current price possibly lower)
Technical data & information: Consistent with the vtac mission, the viking tactics light mount was designed for today's modern warriors- providing a light-weight and versatile option to mount a flashlight onto any picatinny rail system. Made of a modified acrylic pvc alloy thermoplastic with high impact and abrasion resistant qualities which have been proven to withstand the harshest environments, the viking tactics light mount is designed so that you can mount your light so that it is out of your field of view and easily activated. This new and improved version of the original vtac light mount design gives you enormous flexibility. It will allow you to mount most lights with a .80 or 1" diameter and w mfg: viking tactics specs: pvc alloy themoplastic, black, coyote tan, or flat dark earth. 1ß½" (3.8cm) long, 2β½" (6.3cm) wide, 1βό" (3.2cm) high. 1.8 oz. (51g) weight. Fits .800" with spacer or 1" adaptable to the two different diameters. US specification & reliable quality shooting flashlight mounts by Viking. Part Nr: VTACMK4GO.
More Details : click here
SEARCH this site : click here
|
|
|
Viking Tactics Light Mount Flashlight/Laser Mount Coyote Tan US Specifications
USD 24.99
(Indicative price - actual current price possibly lower)
Technical data & information: Consistent with the vtac mission, the viking tactics light mount was designed for today's modern warriors- providing a light-weight and versatile option to mount a flashlight onto any picatinny rail system. Made of a modified acrylic pvc alloy thermoplastic with high impact and abrasion resistant qualities which have been proven to withstand the harshest environments, the viking tactics light mount is designed so that you can mount your light so that it is out of your field of view and easily activated. This new and improved version of the original vtac light mount design gives you enormous flexibility. It will allow you to mount most lights with a .80 or 1" diameter and w mfg: viking tactics specs: pvc alloy themoplastic, black, coyote tan, or flat dark earth. 1ß½" (3.8cm) long, 2β½" (6.3cm) wide, 1βό" (3.2cm) high. 1.8 oz. (51g) weight. Fits .800" with spacer or 1" adaptable to the two different diameters. US specification & reliable quality shooting flashlight mounts by Viking. Part Nr: VTACMK4COYOTE.
More Details : click here
SEARCH this site : click here
|
|
|
Haley Strategic By Impact Wc Ar 15/M16 Thorntail Keymod Light Mounts Thorntail Keymod 1.03" Offset Light Mount US Specifications
USD 69.99
(Indicative price - actual current price possibly lower)
Technical data & information: The proven thorntail adaptive light mount designs are now available in direct keymod attaching models. By attaching directly to a keymod handguard you can eliminate the need for a picatinny rail section allowing you to fully utilize the thorntail adaptive light mounts low profile design. The thorntail keymod picatinny offset adaptive light mount is designed to directly attach surefire's m300's, m600's mini-scout and any 1913 rail mounted weaponlights (inforce apl, wml's, surefire x300's, x400's, streamlight tlr's) to a keymod compatible forend, eliminating the need for separate bulky 1913 rail sections and a separate light mount. The thornt mfg: haley strategic by impact wc. US specification & reliable quality shooting flashlight mounts by Haley. Part Nr: LKEY103.
More Details : click here
SEARCH this site : click here
|
|
|
Bravo Company Bcmgunfighter Ring Light Mount 1" Mod O M Lok Ring Light Mount 1" Mod 0 M Lok US Specifications
USD 39.95
(Indicative price - actual current price possibly lower)
Technical data & information: The bravo company bcmgunfighter mod 0 m-lok light mount enables you to attach a compact handheld flashlight to any rifle, carbine, or shotgun with m-lok accessory slots on the handguard or forend. The bcm mod 0 m-lok mount accepts any flashlight with a 1" o.D. Barrel and converts it into a convenient weaponlight. The bcmgunfighter mod 0 m-lok light mount can be installed flush or offset to the right or left of the forend. Accepts most handheld tactical flashlights with a 1" o.D. Round body study all-aluminum construction matte black hardcoat anodized finish for installation on m-lok accessory-mounting slots only, a keymod& mfg: bravo company. US specification & reliable quality shooting flashlight mounts by Bravo. Part Nr: BCMLM1MOMCMR.
More Details : click here
SEARCH this site : click here
|
|
|
Tacstar Universal Flashlight Mount #4 Universal Flashlight Mount US Specifications
USD 18.99
(Indicative price - actual current price possibly lower)
Technical data & information: Made especially to mount flashlights to your shotguns and rifles without modifications to the barrel. This all-steel, two-piece light mount fastens securely to the barrel with two allen head screws. Allen wrench and two spare screws included. Mfg: tacstar specs: steel, gloss black finish. #4 mount attaches 1" light to βύ" to 1" barrel. Two extra allen head screws included. US specification & reliable quality shooting flashlight mounts by Tacstar. Part Nr: 1081114.
More Details : click here
SEARCH this site : click here
|
|
|
Haley Strategic By Impact Wc Ar 15/M16 Thorntail Keymod Light Mounts Thorntail Keymod Mil620 Offset Light Mount US Specifications
USD 49.99
(Indicative price - actual current price possibly lower)
Technical data & information: The proven thorntail adaptive light mount designs are now available in direct keymod attaching models. By attaching directly to a keymod handguard you can eliminate the need for a picatinny rail section allowing you to fully utilize the thorntail adaptive light mounts low profile design. The thorntail keymod picatinny offset adaptive light mount is designed to directly attach surefire's m300's, m600's mini-scout and any 1913 rail mounted weaponlights (inforce apl, wml's, surefire x300's, x400's, streamlight tlr's) to a keymod compatible forend, eliminating the need for separate bulky 1913 rail sections and a separate light mount. The thornt mfg: haley strategic by impact wc. US specification & reliable quality shooting flashlight mounts by Haley. Part Nr: LKEYMIL620.
More Details : click here
SEARCH this site : click here
|
|
|
Vltor Weapon Systems Scout Mount Sm E Scout Mount US Specifications
USD 34.99
(Indicative price - actual current price possibly lower)
Technical data & information: All-metal, low-profile mount converts a surefire or similar handheld tactical flashlight into a compact weaponlight that gives you the versatility of weapon-mounted illumination without the expense of a separate light. Quick-detach design lets you remove the light from the gun and return it to handheld use in seconds. Triple-function cross-bolt with large, easy-grasp thumbscrew tightens the mount around the light body to prevent slippage under recoil and clamps the mount to any mil-std 1913 picatinny or similar accessory rail. Also serves as a recoil lug to prevent unwanted movement of the mount on the rail. Retaining pin captures cross-bolt so it can't fall off when the mount is re mfg: vltor weapon systems specs: aluminum, hardcoat anodized, matte black. Steel cross-bolt, black. Sm-e fits lights with .810" to .826" o.D., including surefire executive series. Sm-ocg off-set mount fits flashlights with 1.010" to 1.040" o.D., including surefire g- and ck-series. Smq-ocg quick-rele. US specification & reliable quality shooting flashlight mounts by Vltor. Part Nr: SME.
More Details : click here
SEARCH this site : click here
|
|
|
Vltor Weapon Systems Scout Mount Sm Ocg Off Set Scout Mount US Specifications
USD 59.99
(Indicative price - actual current price possibly lower)
Technical data & information: All-metal, low-profile mount converts a surefire or similar handheld tactical flashlight into a compact weaponlight that gives you the versatility of weapon-mounted illumination without the expense of a separate light. Quick-detach design lets you remove the light from the gun and return it to handheld use in seconds. Triple-function cross-bolt with large, easy-grasp thumbscrew tightens the mount around the light body to prevent slippage under recoil and clamps the mount to any mil-std 1913 picatinny or similar accessory rail. Also serves as a recoil lug to prevent unwanted movement of the mount on the rail. Retaining pin captures cross-bolt so it can't fall off when the mount is re mfg: vltor weapon systems specs: aluminum, hardcoat anodized, matte black. Steel cross-bolt, black. Sm-e fits lights with .810" to .826" o.D., including surefire executive series. Sm-ocg off-set mount fits flashlights with 1.010" to 1.040" o.D., including surefire g- and ck-series. Smq-ocg quick-rele. US specification & reliable quality shooting flashlight mounts by Vltor. Part Nr: SMOCG.
More Details : click here
SEARCH this site : click here
|
|
|
Bravo Company Bcmgunfighter 1913 Light Mount Modular M Lok Surefire Scout Light Mount Modular M Lok US Specifications
USD 39.95
(Indicative price - actual current price possibly lower)
Technical data & information: The bravo company bcmgunfighter 1913 light mount m-lok is an adapter that lets you easily install a light (or other accessory) with a mil-std 1913 picatinny mount on your m-lok handguard. It will let you position the light flush or cantilevered on either side of the handguard, in the 3 or 9 o'clock position. With the bcmgunfighter 1913 light mount m-lok, you don't have to permanently change the light's built-in attachment system. Remove it from your m-lok handguard and quickly re-install it on your picatinny gear at anytime. Fits most common weaponlights designed for picatinny rail attachment multiple mounting holes allow you to choose p mfg: bravo company. US specification & reliable quality shooting flashlight mounts by Bravo. Part Nr: BCM1913LMMCMR.
More Details : click here
SEARCH this site : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Shooting Flashlight Mounts US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
