Spuhr Isms Red Dot Interface Mounts Aimpoint Micro Isms Interface US Specifications
Gun Optics Mount Sets by Spuhr
|
Technical data & information: The "ideal scope mount system" have interface surfaces directly on the mount, making it possible to mount accessories either by picatinny rails or as direct interfaces. Direct interfaces allow you to mount a red dot sight directly to your spuhr mounts or rings. Mfg: spuhr. US specification & reliable quality gun optics mount sets by Spuhr. Part Nr: A0025.
 Indicative Price: USD 73
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more high specification gun & shooting items : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Zro Delta Dloc Hamr Optic Mount US Specifications
USD 121.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: Sporting a spring-loaded clamping side bar and three crossbolts that also serve as recoil lugs, the zrodelta's dloc mount for the leupold hamr grabs on to your flattop receiver like a long lost lover. The dloc-hamr is simple to attach: just loosen the large hex nut, push the clamping bar out, and since it's under spring tension, let it snap on your top rail. Then just tighten the screw by hand for a solid yet quick-detachable installation, or grab a wrench and tighten the nut to spec for a non-qd installation. Quick attach/detach without loss of optic's zero positions bottom of hamr .222" above rail adjustment knob permits hand-tightening wi mfg: zro delta. US specification & reliable quality gun optics mount sets by ZRO Delta. Part Nr: 7.023E+11.
More Details : click here
SEARCH this site : click here
|
|
|
Badger Ordnance 30mm Recon Unimounts Ex High 1.54 0 Moa US Specifications
USD 229.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: The badger ordnance 30mm recon unimount is designed specifically to co-witness your scope with clip-on night vision and thermal/fusion devices. The 30mm recon unimount has extra forward offset to make it easy for you to use it with low-magnification and long eye relief optics. Clamps to any mil-std 1913 picatinny rail 0 moa, no built-in elevation machined 6061 t6 aluminum, mil-spec hardcoat anodized, matte black hardened steel crossbolts & hex nuts for an extra-secure installation the badger ordnance 30mm recon unimount is a sturdy, one-piece mounting solution built to withstand heavy recoil and hand the knocks and bruises of tactical operations. Mfg: badger ordnance. US specification & reliable quality gun optics mount sets by Badger. Part Nr: 306317.
More Details : click here
SEARCH this site : click here
|
|
|
Talley Light Weight Scope Mount Remington 700/725 La Low 1" Scope Mounts 20 Moa US Specifications
USD 69.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: One-piece construction blends the ring and base into a single unit. Eliminating the ring/base joint not only keeps weight to a minimum, it provides a stronger mount. Each ring cap is 5⁄8" wide, with four, torx screws, to keep large scopes from slipping or shifting. Designed by mel forbes of new ultralight arms. Mfg: talley specs: 7000 series aluminum, black, anodized, matte finish. Accepts 1" dia. Scopes, unless otherwise listed in fits column for 30mm dia. Scopes. Height from bottom of ring to top of receiver: low, .400" (10.1mm), med, .500" (12.7mm). High, .640" (16.3mm), x‑high, .740" (18.8mm). Approx. We. US specification & reliable quality gun optics mount sets by Talley. Part Nr: 930700LM.
More Details : click here
SEARCH this site : click here
|
|
|
Talley Light Weight Scope Mount Winchester Model 70 Post 64 Medium 30mm Scope Mounts US Specifications
USD 46.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: One-piece construction blends the ring and base into a single unit. Eliminating the ring/base joint not only keeps weight to a minimum, it provides a stronger mount. Each ring cap is 5⁄8" wide, with four, torx screws, to keep large scopes from slipping or shifting. Designed by mel forbes of new ultralight arms. Mfg: talley specs: 7000 series aluminum, black, anodized, matte finish. Accepts 1" dia. Scopes, unless otherwise listed in fits column for 30mm dia. Scopes. Height from bottom of ring to top of receiver: low, .400" (10.1mm), med, .500" (12.7mm). High, .640" (16.3mm), x‑high, .740" (18.8mm). Approx. We. US specification & reliable quality gun optics mount sets by Talley. Part Nr: 740702.
More Details : click here
SEARCH this site : click here
|
|
|
Spuhr Isms Picatinny Mounts 35mm Isms Mount 139mm Mounting Length 20.6 Moa US Specifications
USD 410
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: The isms (ideal scope mount system) is an extremely sturdy scope mount, with the possibility to attach multiple optical accessories directly to the mount. Built-in scope level and 45-degree split of the rings provides unobstructed view of your optics knobs. The durable design of the mounts prevents damage to the scope due to flexing during heavy recoil. The rings are grooved on the inside for better grip and the mount base is milled from a sinlge billet of aluminum. Mounts include an innovative tool to index your scope properly to the mount and gun. Mounts have a minimum of 7 interfaces for accessories to be mounted. The rings are cut at a 45 degree angle instead of horizontally, prov mfg: spuhr. US specification & reliable quality gun optics mount sets by Spuhr. Part Nr: SP5601.
More Details : click here
SEARCH this site : click here
|
|
|
Warne Mfg. Company Ar 15/M16 R.A.M.P. Tactical Mount Tactical R.A.M.P Mount 1 Inch Green US Specifications
USD 161.49
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: The rapid acquisition multisight platform (r.A.M.P.) is a one-piece cantilever mount with integral scope rings that positions optics farther forward to provide 1" of extra space at the rear for mounting a long eye relief scope, night vision device, or magnifier. Features removable mil-std 1913 picatinny rails on the left and right sides that let you mount secondary sights 45 off-axis from the main optic. Each top ring strap is secured with four torx screws for recoil-proof holding power. Two large hex nuts and 3" long steel clamping bar lock the mount to a picatinny receiver rail. Smooth contours and radiused edges give a streamlined appearance, reduce weight, and prevent snagging. Model mfg: warne mfg. Company specs: 6061 t6 aluminum, hardcoat anodized, and steel hardware, magnesium phosphate finish, matte black. 71/8" (18.1cm) long, 23⁄8" (6cm) wide, 2βό" (5.7cm) high. Height measured from top of rail to bottom of ring: .75" (1.9cm). Approximately 9.7 oz. (275g) wei. US specification & reliable quality gun optics mount sets by Warne. Part Nr: RAMP1Z.
More Details : click here
SEARCH this site : click here
|
|
|
Talley Light Weight Scope Mount Ruger 10/22 1" Medium Scope Mount US Specifications
USD 46.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: One-piece construction blends the ring and base into a single unit. Eliminating the ring/base joint not only keeps weight to a minimum, it provides a stronger mount. Each ring cap is 5⁄8" wide, with four, torx screws, to keep large scopes from slipping or shifting. Designed by mel forbes of new ultralight arms. Mfg: talley specs: 7000 series aluminum, black, anodized, matte finish. Accepts 1" dia. Scopes, unless otherwise listed in fits column for 30mm dia. Scopes. Height from bottom of ring to top of receiver: low, .400" (10.1mm), med, .500" (12.7mm). High, .640" (16.3mm), x‑high, .740" (18.8mm). Approx. We. US specification & reliable quality gun optics mount sets by Talley. Part Nr: 940707.
More Details : click here
SEARCH this site : click here
|
|
|
Talley Light Weight Scope Mount Kimber 8400 Medium 1" Scope Mounts US Specifications
USD 46.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: One-piece construction blends the ring and base into a single unit. Eliminating the ring/base joint not only keeps weight to a minimum, it provides a stronger mount. Each ring cap is 5⁄8" wide, with four, torx screws, to keep large scopes from slipping or shifting. Designed by mel forbes of new ultralight arms. Mfg: talley specs: 7000 series aluminum, black, anodized, matte finish. Accepts 1" dia. Scopes, unless otherwise listed in fits column for 30mm dia. Scopes. Height from bottom of ring to top of receiver: low, .400" (10.1mm), med, .500" (12.7mm). High, .640" (16.3mm), x‑high, .740" (18.8mm). Approx. We. US specification & reliable quality gun optics mount sets by Talley. Part Nr: 940840.
More Details : click here
SEARCH this site : click here
|
|
|
Leupold Dual Dovetail Rifle Bases Dual Dovetail Base Winchester 70 2 Pc Matte US Specifications
USD 27.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: Leupold's famous rotary dovetail rings in both front and rear bases; there's no way a ring can shoot off its base. Ideal for large caliber, heavy kicking rifles that can throw a scope off easily, plus light caliber varmint rifles that need an absolutely rigid scope mount to make full use of the gun's accuracy potential. Dual dovetail bases and rings must be used together; will not interchange with other leupold rings and bases. Rings and bases sold separately; select the correct base set for your rifle, then choose rings.Those marked "rev. Frt." have reversible front base to help get correct ring spacing. Mfg: leupold specs: steel. Finish: standard std. And pb, polished, blue; matte, matte, blue; silver, matte. US specification & reliable quality gun optics mount sets by Leupold. Part Nr: 50046.
More Details : click here
SEARCH this site : click here
|
|
|
Spuhr Accuracy International Isms Direct Mounts 34mm Isms Direct Mount 121mm Mounting Length 44.4 Moa US Specifications
USD 410
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: This version of the spuhr isms scope mount attaches directly to the scope rails on accuracy international rifle chassis systems, no need for drilling, tapping, or separate rings-and-base. The ideal scope mount system is a revolutionary scope mount with multiple attachment points for accessories like red dot sights, angle / cosine indicators, and other add-ons needed by precision rifle shooters. The built-in level helps prevent you from canting the rifle and compromising accuracy. The entire isms is machined from a single piece of aluminum billet, ensuring it will not flex under heavy recoil. This sturdiness protects the scope from slipping out of alignment under recoil or, worse, be mfg: spuhr. US specification & reliable quality gun optics mount sets by Spuhr. Part Nr: SA4801.
More Details : click here
SEARCH this site : click here
|
|
|
Badger Ordnance 30mm Coaxial Rangefinder Mount 30mm 4 Screw Coaxial Range Finder Mount US Specifications
USD 158.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: The badger ordnance coaxial laser range finder 30mm mount provides a stable platform for attaching a picatinny rail mounted range finder on your rifle's scope. The coaxial laser range finder 30mm mount bolts onto the bottom scope ring. The range finder will be positioned at the optimum height for easy reading, yet it won't interfere with the scope objective lens. Fits 4-screw 30mm badger rings & unimounts only (screw holes are on .355" centers) 9-slot picatinny rail positions rail approx. 1.325" above tube machined from strong, lightweight 6061 t6 aluminum matte black military type iii hardcoat anodized finish the badger ordn mfg: badger ordnance. US specification & reliable quality gun optics mount sets by Badger. Part Nr: 306165.
More Details : click here
SEARCH this site : click here
|
|
|
Warne Mfg. Company X Skel Mounts 30mm Dark Earth US Specifications
USD 109.19
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: Warne scope mounts is excited to introduce their second generation skel mount, the x-skel. This new msr mount offers an additional 1" of forward cantilever, and 1 piece clamp design for added strength. The rugged, lightweight design of the x-skel maintains our famous return to zero capability, and utilizes β½" hex nuts for rock solid attachment. It features a skeletonized ring body and caps for reduced weight and steel threaded cap inserts for maximum durability. The x-skel places your optic at the ideal height with a generous cantilever for proper eye relief, it will easily accommodate the longer eyepieces found on many of today's scopes. Lightweight mfg: warne mfg. Company. US specification & reliable quality gun optics mount sets by Warne. Part Nr: XSKEL30DE.
More Details : click here
SEARCH this site : click here
|
|
|
Spuhr Isms Picatinny Mounts 30mm 1.89" 0 Moa Unimount US Specifications
USD 410
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: The isms (ideal scope mount system) is an extremely sturdy scope mount, with the possibility to attach multiple optical accessories directly to the mount. Built-in scope level and 45-degree split of the rings provides unobstructed view of your optics knobs. The durable design of the mounts prevents damage to the scope due to flexing during heavy recoil. The rings are grooved on the inside for better grip and the mount base is milled from a sinlge billet of aluminum. Mounts include an innovative tool to index your scope properly to the mount and gun. Mounts have a minimum of 7 interfaces for accessories to be mounted. The rings are cut at a 45 degree angle instead of horizontally, prov mfg: spuhr. US specification & reliable quality gun optics mount sets by Spuhr. Part Nr: SP3004.
More Details : click here
SEARCH this site : click here
|
|
|
Spuhr Isms Picatinny Mounts 35mm Isms Mount 126mm Mounting Length 0 Moa US Specifications
USD 410
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: The isms (ideal scope mount system) is an extremely sturdy scope mount, with the possibility to attach multiple optical accessories directly to the mount. Built-in scope level and 45-degree split of the rings provides unobstructed view of your optics knobs. The durable design of the mounts prevents damage to the scope due to flexing during heavy recoil. The rings are grooved on the inside for better grip and the mount base is milled from a sinlge billet of aluminum. Mounts include an innovative tool to index your scope properly to the mount and gun. Mounts have a minimum of 7 interfaces for accessories to be mounted. The rings are cut at a 45 degree angle instead of horizontally, prov mfg: spuhr. US specification & reliable quality gun optics mount sets by Spuhr. Part Nr: SP5001SHORT.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Spuhr Isms Red Dot Interface Mounts Aimpoint Micro Isms Interface US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
