Tactical Operations Rifle Stock Packs Black Nylon US Specifications
Rifle Stock Cheek Pieces by Tactical Operations
|
Technical data & information: Made for the rifle shooter who requires a lot from a cheek pad, the tac ops pad offers a soft, synthetic suede cheek rest for increased shooting comfort with minimal increase in comb height. Stitched and reinforced nylon body has a zippered pocket for carrying little necessities like a windage and elevation card, cleaning gear, or small shooting accessories. Heavy, reinforced elastic cartridge carrier outside the pocket securely holds up to 8 rounds at your fingertips, ready to load. Three hook-and-loop cinch straps provide fast, secure installation, adjustment, and removal. Rear strap includes a hook-and-loop lined drag handle. Mfg: tactical operations specs: cordura nylon shell, black, o.D. Green, or multi-camo. 7ß?" (19.6cm) long, 4" (12.7cm) tall at buttplate end, 3" (7.6cm) wide. Adds approximately .35" (8.9mm) to cheek height. 7 oz. (198g) wt. US specification & reliable quality rifle stock cheek pieces by Tactical Operations. Part Nr: 100-004-629.
 Indicative Price: USD 60.99
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more high specification gun & shooting items : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Magpul Ar 15 Ctr/Moe Cheek Riser 1/4" Gray US Specifications
USD 18.95
(Indicative price - actual current price possibly lower)
Rifle Stock Cheek Pieces US Specifications
Technical data & information: Molded polymer cheek riser snaps onto magpul ctr and moe buttstocks to provide added support and ensure correct eye alignment with open sights or optics for fast target acquisition. Creates a stable platform for accurate, long-range shooting. Three models let you to raise the cheekweld by βό", β½", or βύ" for a personalized fit. No stock modification required. Designed for non-ar installations of ctr/moe stocks; if installed on ar-15, stock must be left fully extended to allow operation of charging handle. Mfg: magpul specs: fiber-filled polymer composite, black. Fits all magpul ctr and moe buttstocks. US specification & reliable quality rifle stock cheek pieces by Magpul. Part Nr: MAG325GRY.
More Details : click here
SEARCH this site : click here
|
|
|
Ruger Stock Module For High Comb/Compact Pull US Specifications
USD 25.99
(Indicative price - actual current price possibly lower)
Rifle Stock Cheek Pieces US Specifications
Technical data & information: If you've added an aftermarket scope or mounted sight to your rifle and find your cheek needing a boost up, this ruger stock module is just the ticket. The genuine ruger factory accessory features a high comb and compact pull. 1.84" comb 12.50" length of pull fits any ruger modular stock system the high comb of the ruger stock module raises the shooter's cheek placement, putting the user's eyes in line with the mounted optics. It also features a shorter length of pull, ideal for shooters with that preference. Mfg: ruger. US specification & reliable quality rifle stock cheek pieces by Ruger. Part Nr: 90434.
More Details : click here
SEARCH this site : click here
|
|
|
The Original D&E Cheekeeze Rifle Stick On Scope Eze 5/8" 1" Stick On Scope Eze Black Polymer US Specifications
USD 39.99
(Indicative price - actual current price possibly lower)
Rifle Stock Cheek Pieces US Specifications
Technical data & information: Recoil-absorbing, rubber pad raises the line of sight. Cushions the cheek from recoil for faster, more comfortable shooting. Works for both scope-mounted and open-sight-equipped rifles and shotguns. Made from extra-dense, polymer-foam rubber. Stick-on, peel-off adhesive backing won't shoot loose or shift position. Caution: installation considered permanent. Adhesive may damage some stock finishes. Mfg: the original d&e cheekeeze specs: polymer foam, black. 6" (15cm) long. 1.3 oz. (37g) wt. Height tapers above factory; drop at comb shown in chart. ß?" slimside, 1⁄16" (1.6mm) thick sides with βό" (6.3mm) thick, parallel top. 3/8" slimside, 1⁄16" (1.6mm) thick si. US specification & reliable quality rifle stock cheek pieces by D&E Cheekeeze. Part Nr: 30581.
More Details : click here
SEARCH this site : click here
|
|
|
Command Arms Acc Ar 15 Standard M4 Stock Saddle Black Plastic US Specifications
USD 16.99
(Indicative price - actual current price possibly lower)
Rifle Stock Cheek Pieces US Specifications
Technical data & information: Provides added cheek support for increased comfort and shooting accuracy to ar-type rifles equipped with m4-style collapsible stocks. Plus, gives an advanced tactical appearance similar to the sopmod stock. Made from a very lightweight, fiberglass reinforced plastic that's as strong as it is functional. Waterproof, sealed compartments on each side will hold four "aa" or six cr123 cell batteries. No gunsmithing required for installation; saddle locks onto stock with accessory sling loop hardware that's provided. Rubberized model includes all the features of the standard model and adds a rubberized, no-slip coating that gives an exceptionally solid cheekweld for even greater shooter comfort an mfg: command arms acc specs: injection molded plastic, black, matte finish,53⁄4" (14.5cm) long, 23⁄4" (6.9cm) wide. Fits m4-style stocks only. US specification & reliable quality rifle stock cheek pieces by Command. Part Nr: SST1ASSEMBLY.
More Details : click here
SEARCH this site : click here
|
|
|
Magpul Ar 15 Ctr/Moe Cheek Riser 3/4" Ctr/Moe Cheek Riser Black Polymer US Specifications
USD 18.95
(Indicative price - actual current price possibly lower)
Rifle Stock Cheek Pieces US Specifications
Technical data & information: Molded polymer cheek riser snaps onto magpul ctr and moe buttstocks to provide added support and ensure correct eye alignment with open sights or optics for fast target acquisition. Creates a stable platform for accurate, long-range shooting. Three models let you to raise the cheekweld by βό", β½", or βύ" for a personalized fit. No stock modification required. Designed for non-ar installations of ctr/moe stocks; if installed on ar-15, stock must be left fully extended to allow operation of charging handle. Mfg: magpul specs: fiber-filled polymer composite, black. Fits all magpul ctr and moe buttstocks. US specification & reliable quality rifle stock cheek pieces by Magpul. Part Nr: MAG327BLK.
More Details : click here
SEARCH this site : click here
|
|
|
Magpul Ar 15 Ctr/Moe Cheek Riser 3/4" Od Green US Specifications
USD 18.95
(Indicative price - actual current price possibly lower)
Rifle Stock Cheek Pieces US Specifications
Technical data & information: Molded polymer cheek riser snaps onto magpul ctr and moe buttstocks to provide added support and ensure correct eye alignment with open sights or optics for fast target acquisition. Creates a stable platform for accurate, long-range shooting. Three models let you to raise the cheekweld by βό", β½", or βύ" for a personalized fit. No stock modification required. Designed for non-ar installations of ctr/moe stocks; if installed on ar-15, stock must be left fully extended to allow operation of charging handle. Mfg: magpul specs: fiber-filled polymer composite, black. Fits all magpul ctr and moe buttstocks. US specification & reliable quality rifle stock cheek pieces by Magpul. Part Nr: MAG327ODG.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Tactical Operations Rifle Stock Packs Black Nylon US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
