Talley Tactical Scope Rings 34mm Medium Matte Black Tactical Rings US Specifications
Gun Scope Rings by Talley
|
Technical data & information: Heavy-duty scope rings are precision-machined from solid billet aluminum with dual recoil lugs to ensure your tactical scope won't budge under the heaviest recoil. Full-width ring caps are cut from the same billet as the bottom half of the ring for precise fit and held in place with four stainless steel allen head screws that won't work loose when properly tightened. Matching serial numbers ensure you always mate the cap with the bottom it came with. Locking bar, heavy-duty crossbolt and oversized, β½" hex nut locks the ring to any mil-std 1913 picatinny rail. Hard-anodized for extra surface strength, with a non-reflective matte black finish. Engraved front and back mfg: talley specs: 7075 t6 aluminum, hardcoat anodized, matte black, with 303 stainless steel screws, black finish. 1.9" (5cm) wide, .665" (16.8mm) thick. Models available for 1" (2.5cm) or 30mm o.D. Scope tubes. Heights measured from top of base to center of ring: low, 1" (2.5cm); high. US specification & reliable quality gun scope rings by Talley. Part Nr: BAT34M.
 Indicative Price: USD 179.99
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more high specification gun & shooting items : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Tps Products Tsr Picatinny Scope Rings Tsr Aluminum Rings 30mm Low US Specifications
USD 92.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Tsr series rings, precisely machined from an aluminum billet, with tolerances held to .0002", give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to mil-std 1913 (picatinny) bases. Mfg: tps products, llc. Specs: 7075-t651 aluminum alloy, matte black, hard anodized to mil-a-8625 standards. 5/8" (15.8mm) wide. Height measured from top of base to center of ring. 30mm, high: 1.225" (31.1mm). US specification & reliable quality gun scope rings by TPS. Part Nr: 30580.
More Details : click here
SEARCH this site : click here
|
|
|
Vortex Precision Matched Riflescope Rings 34mm 1.26" High Rings US Specifications
USD 149.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Vortex optics starts with certified usa 7075 t6 billet aluminum and hold it to an extremely tight tolerance of .0005 using their precision computer numeric controlled (cnc) mill. These precision matched rings are kept in pairs throughout the manufacturing process, ensuring perfection from one set to another. These vortex rings are then serialized, vibratory tumbled, hand-bead blasted and finished off with a type iii hard coat anodize. Rugged, lightweight, anti-snag design robust, grade 8 fasteners 100% made in usa guaranteed for life mfg: vortex optics specs: ring heights are measured from the base of the ring to the center of the riflescope tube. Picatinny style. US specification & reliable quality gun scope rings by Vortex. Part Nr: PMR34126.
More Details : click here
SEARCH this site : click here
|
|
|
Tps Products Tsr W Picatinny/Weaver Scope Rings Tsr W Aluminum Rings 1" Medium US Specifications
USD 86.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Tsr "w" series rings, precisely machined from an alloy steel billet, with tolerances held to .0002", give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to weaver-style or mil-std 1913 (picatinny) bases. Mfg: tps products, llc. Specs: alloy steel, black oxide finish to mil-c-13924 standards. 5/8" (15.8mm) wide. Height measured from top of base to center of ring. 30mm, low: .925" (23.5mm). US specification & reliable quality gun scope rings by TPS. Part Nr: 30621.
More Details : click here
SEARCH this site : click here
|
|
|
Talley Rimfire Scope Rings Anchutz Rings Low US Specifications
USD 48.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Machined from steel bar stock to provide a strong mounting system with a smooth profile. Precision cut dovetails have the correct angle for an exact fit. Torx clamp screws snug down tightly for maximum holding power. Mfg: talley specs: steel, blue, satin finish. Accept 1" scopes. Height from top of base to bottom of ring: low, 313" (8mm). High, .600" (15.2mm). Sold in pairs. T/c classic rings require talley bases. US specification & reliable quality gun scope rings by Talley. Part Nr: 22TRL.
More Details : click here
SEARCH this site : click here
|
|
|
Leupold Standard Rings 30mm High Matte Standard Rings US Specifications
USD 38.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Classic steel, holds scope tightly. Fits leupold std, one- and two-piece bases, plus bases from burris, millett and redfield. Mfg: leupold specs: steel 1" (2.5cm), 26mm (1.02") or 30mm (1.18") i.D. Gloss, polished blue. Matte, matte blue. Silver, satin nickel. Height measurements are from top of base to center of ring: 1", 26mm and 30mm: super low, .550" (13.9mm). Low, .650" (16.5mm). Medium, .770" (19.55mm). High, .900" (22. US specification & reliable quality gun scope rings by Leupold. Part Nr: 49959.
More Details : click here
SEARCH this site : click here
|
|
|
Nightforce 30mm Tactical Rings X Treme Duty Steel Rings 1.125" High US Specifications
USD 165
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Milled from barstock, these rings provide the solid strength required for harsh field and tactical use. With four torx screws per cap, the scope is securely locked into the ring to prevent recoil movement. Large, β½" hex nut lets you torque ring securely to any mil-std 1913 picatinny base, and helps achieve a consistent return to zero. Steel cross lug provides additional strength, prevents shifting caused by recoil. Mfg: nightforce specs: steel, parkerized, matte finish. 30mm i.D. 5/8" (15.9mm) wide. Height measured from top of base to bottom of scope body: low, .300" (7.6mm), high, .535" (13.6mm). Extra high, .782" (19.9mm). Fits picatinny bases. US specification & reliable quality gun scope rings by Nightforce. Part Nr: A104.
More Details : click here
SEARCH this site : click here
|
|
|
Badger Ordnance 34mm Usmc M40a3 Scope Rings 34mm Usmc M40a3 1 Scope Ring US Specifications
USD 189.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Badger ordnance usmc m40a3 34mm scope rings are the same rings issued by the marines for the m40a3 scout sniper rifle. To eliminate the damaging effects caused by mismatched rings, each badger ordnance usmc m40a3 34mm scope ring is precision-machined from barstock steel and serialized to ensure the pair of rings you purchase is as close to identical as possible. Sold in matched pairs robust hex-head clamping nuts torx-head ring cap screws durable black oxide finish nsn #5365-09-511-9954 badger ordnance usmc m40a3 34mm scope rings fit mil-std 1913 picatinny receiver rails and are compatible with any rifle that has such a receiver rail. Mfg: badger ordnance. US specification & reliable quality gun scope rings by Badger. Part Nr: 30675.
More Details : click here
SEARCH this site : click here
|
|
|
Leupold Standard Rings 1" Low Gloss Standard Rings US Specifications
USD 27.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Classic steel, holds scope tightly. Fits leupold std, one- and two-piece bases, plus bases from burris, millett and redfield. Mfg: leupold specs: steel 1" (2.5cm), 26mm (1.02") or 30mm (1.18") i.D. Gloss, polished blue. Matte, matte blue. Silver, satin nickel. Height measurements are from top of base to center of ring: 1", 26mm and 30mm: super low, .550" (13.9mm). Low, .650" (16.5mm). Medium, .770" (19.55mm). High, .900" (22. US specification & reliable quality gun scope rings by Leupold. Part Nr: 49897.
More Details : click here
SEARCH this site : click here
|
|
|
Nightforce Standard Duty Rings 30mm Extra High (1.50") Standard Duty Rings US Specifications
USD 77
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Nightforce standard duty rings provide an ideal combination of durability and value, ensuring that rifle owners looking to mount a quality optic can find a matching pair of scope rings that maintain zero and secure an optic. Available in .90", 1.00", 1.25" and 1.50" inch heights for 30mm tubes, the straightforward two-screw design of the nightforce standard duty rings require less front-to-back mounting space, ideal where installation choices are limited. Designed for use on picatinny bases machined from aluminum features matte-black finish the nightforce standard duty rings include a positive locking jaw design and machined recoil mfg: nightforce. US specification & reliable quality gun scope rings by Nightforce. Part Nr: A419.
More Details : click here
SEARCH this site : click here
|
|
|
Nightforce Ultralight Rings 34mm High 1.125" 6 Screw Ultralight Rings US Specifications
USD 209
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Designed to fit mil-std. 1913 scope bases, nightforce rings are precisely manufactured to match the machined recess of a nightforce mil-std. 1913 base, providing perfect alignment and accuracy. Nightforce rings are designed and produced in-house to exacting specifications entirely out of steel or from 7075-t6 aluminum with beta series titanium crossbolts and jaws. All nightforce rings are 100% micro-radiused and honed in pairs for perfect fit of 30mm scope tubes to prevent the possibility of the rings damaging your scope. Mfg: nightforce ring heights are measured from the top of the base to the center of the ring. US specification & reliable quality gun scope rings by Nightforce. Part Nr: A210.
More Details : click here
SEARCH this site : click here
|
|
|
Warne Mfg. Company Maxima Grooved Receiver Cz Rings Qd Grl Cz 550 Rings 1 Inch Medium Matte US Specifications
USD 90.79
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Maxima grooved receiver line of scope mounts are designed to fill the need of mounting scopes to rifles with an integrated receiver mounting rail. Because each manufacturer has their own proprietary mounting rail design, each ring model must be machined to exacting tolerances for proper fit and function. The maxima grooved receiver line fulfills that need. The precision cnc machined warne rings provide unsurpassed strength, durability and quality, and fit a variety of rifle models including cz 527 (16mm dovetail) and cz 550 (19mm dovetail) receivers. Available in both quick detach (qd) and fixed models for most cz firearms. Mfg: warne mfg. Company specs: mim steel, powder coated black, matte. Height measured from top of base (or integral dovetail) to the inside bottom of ring. US specification & reliable quality gun scope rings by Warne. Part Nr: 1BLM.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Talley Tactical Scope Rings 34mm Medium Matte Black Tactical Rings US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
