Tempilaq 2 Oz. 650Β° F. US Specifications
Gunsmith Heat Treating Accessories by Tempilaq
|
Technical data & information: Laboratory control, minimum cost. For furnace or open flame hardening and tempering of steel parts. Apply thin smear to surface to be treated. When desired temperature is reached, tempilaq melts sharply. Disregard color changes, when templiaq melts, quench! mfg: tempilaq specs: 2 fl. Oz. (59 ml) in brush top bottle. US specification & reliable quality gunsmith heat treating accessories by Tempilaq. Part Nr: 24421.
 Indicative Price: USD 26.99
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more high specification gun & shooting items : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Brownells Tough Quench ing Oil 1 Gal. Tough Quench US Specifications
USD 59.99
(Indicative price - actual current price possibly lower)
Gunsmith Heat Treating Accessories US Specifications
Technical data & information: Developed specifically for predictable, controlled, fast quenching speed to consistently give a uniform, high. Oil quenching hardness. Oil soluble agents wet out work rapidly, prevents formation of gas pockets. Less smoke, low rate of heat transfer to minimize distortion and cracking of the steel. Can be shipped ups. Mfg: brownells specs: 1 qt. (16 fl. Oz./946 ml), 1 gal. (128 fl. Oz./3.8 l) in cans. Flash point is 355° f. (179.4° c.); fire point is 410° f. (210° c.). US specification & reliable quality gunsmith heat treating accessories by Brownells. Part Nr: 083-027-128.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Heat Stop Heat Control Paste Heat Stop US Specifications
USD 16.99
(Indicative price - actual current price possibly lower)
Gunsmith Heat Treating Accessories US Specifications
Technical data & information: Fantastic compound prevents heat transfer so effectively you can heat one end of a steel bar red hot, while holding the other end in your bare hand! absorbs heat that would cause adjacent parts damage during welding, brazing, heat-treating and soldering. One of the greatest chemical developments ever for the gunsmith. For welding bolt knobs, shortening actions, installing ramps and sights, plus all milling and grinding operations where it protects expensive, hard-to-replace drill bits and cutters, as well as the gun. Odorless, non-toxic, no fumes, won't harm skin, won't stain surfaces applied to, won't melt or run, and cleans up easily with water. Mfg: brownells specs: 1 lb. (453.6g) net weight. US specification & reliable quality gunsmith heat treating accessories by Brownells. Part Nr: 083-012-100.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Tough Quench ing Oil 1 Qt. Tough Quench US Specifications
USD 18.99
(Indicative price - actual current price possibly lower)
Gunsmith Heat Treating Accessories US Specifications
Technical data & information: Developed specifically for predictable, controlled, fast quenching speed to consistently give a uniform, high. Oil quenching hardness. Oil soluble agents wet out work rapidly, prevents formation of gas pockets. Less smoke, low rate of heat transfer to minimize distortion and cracking of the steel. Can be shipped ups. Mfg: brownells specs: 1 qt. (16 fl. Oz./946 ml), 1 gal. (128 fl. Oz./3.8 l) in cans. Flash point is 355° f. (179.4° c.); fire point is 410° f. (210° c.). US specification & reliable quality gunsmith heat treating accessories by Brownells. Part Nr: 083-027-032.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Non Scaling Compound US Specifications
USD 24.99
(Indicative price - actual current price possibly lower)
Gunsmith Heat Treating Accessories US Specifications
Technical data & information: Saves hours of polishing, grinding, shaping, parts can be made to exact dimensions before heat treating without fear of dimension change from scaling, pitting, decarb loss. Extremely simple to use, for both hardening or annealing. Heat the work piece to about 500 f., coat with the dry compound powder, finish heating to temperature, and quench/cool as required. Parts come clean in boiling water. Mfg: brownells specs: 1 lb. (454 g). Not for steels that harden above 1650 f. US specification & reliable quality gunsmith heat treating accessories by Brownells. Part Nr: 083-015-100.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Tempilaq 2 Oz. 650Β° F. US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
