Tps Products Tsr W Picatinny/Weaver Scope Rings Tsr W Aluminum Rings 30mm Medium US Specifications
Gun Scope Rings by TPS
|
Technical data & information: Tsr "w" series rings, precisely machined from an alloy steel billet, with tolerances held to .0002", give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to weaver-style or mil-std 1913 (picatinny) bases. Mfg: tps products, llc. Specs: alloy steel, black oxide finish to mil-c-13924 standards. 5/8" (15.8mm) wide. Height measured from top of base to center of ring. 30mm, low: .925" (23.5mm). US specification & reliable quality gun scope rings by TPS. Part Nr: 30681.
 Indicative Price: USD 92.99
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more high specification gun & shooting items : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Ruger 1" Scope Ring 30mm Scope Ring 6b30 X High Blue US Specifications
USD 34.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: High-quality ruger factory rings install easily and provide solid, zero-movement scope attachment to ruger rifles and handguns with integral bases, no. 1 rifles with factory base, and no. 3 rifles with special factory bases available separately. Low, medium, high, and extra-high heights in blued carbon steel, natural stainless steel, or stainless with ruger's proprietary matte target grey finish. Sold as single rings. Mfg: ruger specs: carbon steel, polished blue finish (bl), stainless steel, natural (ss), or target grey (tg) finish. Ring heights measured from top of base to bottom of scope tube. Low, .325". Medium (med.), .435". High, .565". Extra-high (x-high), .680". Offset ring availa. US specification & reliable quality gun scope rings by Ruger. Part Nr: 90275.
More Details : click here
SEARCH this site : click here
|
|
|
Leupold Dual Dovetail Rings 1 In Medium Matte US Specifications
USD 25.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Leupold's famous rotary dovetail rings in both front and rear bases; there's no way a ring can shoot off its base. Ideal for large caliber, heavy kicking rifles that can throw a scope off easily, plus light caliber varmint rifles that need an absolutely rigid scope mount to make full use of the gun's accuracy potential. Dual dovetail rings must be used together; will not interchange with other leupold rings. Heights from low for small scopes to super high for giant objective bells. Sold in pairs. Mfg: leupold specs: steel. Finish: pb, polished, blue; matte, matte, blue; silver, matte. Height is from top of base to center of rings. US specification & reliable quality gun scope rings by Leupold. Part Nr: 49916.
More Details : click here
SEARCH this site : click here
|
|
|
Precision Reflex 30mm Steel Rings 30mm Intermediate Height Steel Rings US Specifications
USD 129.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Precision reflex's steel 30mm scope rings are built to handle heavy recoil and the inevitable knocks and dings of extreme service. They are machined from tough 4140 carbon steel, not a fancy alloy but one with plenty of strength to handle even the oomph of a .50 caliber, and given a durable, non-reflective black parkerized finish. Pri steel 30mm scope rings have four robust torx-head screws anchoring the ring caps, while a hardened steel crossbolt secured by a hefty 1/2" diameter steel hex nut fixes the ring to the scope base. Sold in pairs mounts to standard picatinny scope bases fits 30mm scope tubes pri steel 30mm scope rings are an excellent mfg: precision reflex, inc. US specification & reliable quality gun scope rings by Precision. Part Nr: 103007.
More Details : click here
SEARCH this site : click here
|
|
|
Warne Mfg. Company Maxima Quick Detach Rings Maxima Qd Rings 34mm Medium Gloss US Specifications
USD 103.69
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Maxima quick detach rings are the most durable and versatile quick detachable mounting system available. Each ring is precision cnc machined from sintered steel technology, a process that allows intricate steel parts to be formed and then fired retaining the strength properties of steel while adding the necessary ductility that scope mounts require for perfect grip contact around the circumference of the scope. The maxima qd rings sport the unique warne indexable lever system which allows the user to remove the optics from the rifle then reattach it without the loss of zero, as well as allowing the location of the lever to be indexed once the rings are affixed to the bases. After mfg: warne mfg. Company specs: steel, powder-coated black or nickel plated. All available in polished (reg.), matte finish or silver, matte finish. Height measured from top of base to inside bottom of ring. Available in low, .250" (6.35mm), medium, .375" (9.5mm), high, .525" (13.3mm). US specification & reliable quality gun scope rings by Warne. Part Nr: 221LG.
More Details : click here
SEARCH this site : click here
|
|
|
Warne Mfg. Company 7.3/22 Rings 30mm Medium Matte 7.3/22 Quick Detach Rings US Specifications
USD 61.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: The strongest small bore scope rings available. Designed to fit a very wide selection of rifles and fit both 3/8" and 11mm dovetails. This is made possible by using a solid steel asymmetrical reversible clamp that can be flipped 180β° and used on wider or narrower dovetails for best fit. Features a 70/30 horizontal construction and are only 1/2" wide. Attachment is made to the dovetail using a single t-15 torx style fastener and have 2 of the same fasteners for the ring top strap holding the entire package together securely. Mfg: warne mfg. Company specs: steel, powder coated, black, matte or gloss finish. Height measured from top of base to inside, bottom of ring. Medium .406" (10.3mm) nominal high. High, .525" (13.3mm) nominal high. US specification & reliable quality gun scope rings by Warne. Part Nr: 314LM.
More Details : click here
SEARCH this site : click here
|
|
|
Weaver Sure Grip Rings 1" X High Matte Rings US Specifications
USD 25.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Steel caps with two screws per side provide extra strong, 4-screw, clamping power. Helps ensure that reticle stays square while tightening top screws. Large clamp nut locks rings to base, provides easy scope installation, removal; and accurate return to zero after re-installation. Mfg: weaver specs: aluminum lower; steel cap, screws, crossbolt and nut. Black, gloss or matte finish. Heights (above base): 1" (2.5cm) diameter, med., .164" (4.16mm); high, .332" (8.43mm); x-high, .560" (14.2mm). US specification & reliable quality gun scope rings by Weaver. Part Nr: 49165.
More Details : click here
SEARCH this site : click here
|
|
|
Badger Ordnance 30mm Usmc M40a3 Scope Rings .886" W/1" Inserts US Specifications
USD 200.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Badger ordnance's usmc m40a3 30mm scope rings were originally designed for the m40a3 scout sniper rifle and the unertl 10x scope. These solid, secure all-steel rings will work on any rifle with a mil-std 1913 picatinny receiver rail. Badger machines each usmc m40a3 30mm scope ring from steel barstock and serializes them as matched pairs, eliminating the damaging effects of mismatched rings. Sold in matched pairs includes ring inserts so they can be used with 1" scope tubes hard black oxide finish torx-head ring cap screws nsn #5365-09-511-9954 badger ordnance usmc m40a3 30mm scope rings provide the solidity and strength required to sta mfg: badger ordnance. US specification & reliable quality gun scope rings by Badger. Part Nr: 30624.
More Details : click here
SEARCH this site : click here
|
|
|
Warne Mfg. Company 35mm Mountain Tech Rings 35mm Ultra High Matte Black Rings US Specifications
USD 119.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Building a backcountry rifle that's easily packable requires examining every aspect of the gun to shave off ounces, and the warne 35mm mountain tech rings are one solid product designed to help hunters lighten their field rig. The warne 35mm mountain tech rings are precision-machined to exact tolerances at the company's factory and are made from 7075-t6 aluminum, which is designed to both save weight while providing enhanced strength. Each ring is finished with a hard coat-anodized treatment that helps it withstand the scratches, knocks and corrosion encountered in the woods. Matte-black finish available in low, medium, high and ultra high heights fits 35m mfg: warne mfg. Company. US specification & reliable quality gun scope rings by Warne. Part Nr: 7244M.
More Details : click here
SEARCH this site : click here
|
|
|
Alaska Arms Ruger Quick Detach Rings Standard Qd Ruger Rings 1 Inch Medium US Specifications
USD 109.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Alaska arms quick release scope rings are exactly that-"quick release". A simple βό turn is all it takes to securely lock or to release the scope from the bases. This style of ring assures irons sights are reliably and quickly accessible for dangerous game rifles. Enables multiple scope setups for an individual rifle that can be quickly and reliably interchanged. American made on cnc machines using american steel to ensure precision for a lifetime of reliability and service. Standard qd rings fit ruger models no.1, 10/22 mag, 96/44, 77/22, 77/17, single six hunter, redhawk, mini-14, mini-30 ranch, mark ii pistol mfg: alaska arms, llc specs: scope objective diameter fitment: low, 32mm objective, med, 42mm objective, high, 52mm objective, extra high, 62mm objective. Finish: satin black. US specification & reliable quality gun scope rings by Alaska. Part Nr: R41LR41L.
More Details : click here
SEARCH this site : click here
|
|
|
Ruger 1" Scope Ring 3ktg Low Target Gray US Specifications
USD 34.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: High-quality ruger factory rings install easily and provide solid, zero-movement scope attachment to ruger rifles and handguns with integral bases, no. 1 rifles with factory base, and no. 3 rifles with special factory bases available separately. Low, medium, high, and extra-high heights in blued carbon steel, natural stainless steel, or stainless with ruger's proprietary matte target grey finish. Sold as single rings. Mfg: ruger specs: carbon steel, polished blue finish (bl), stainless steel, natural (ss), or target grey (tg) finish. Ring heights measured from top of base to bottom of scope tube. Low, .325". Medium (med.), .435". High, .565". Extra-high (x-high), .680". Offset ring availa. US specification & reliable quality gun scope rings by Ruger. Part Nr: 90293.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Tps Products Tsr W Picatinny/Weaver Scope Rings Tsr W Aluminum Rings 30mm Medium US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
