Vang Comp Systems Remington 870 Shotgun Magazine Tube Extension Remington 870 Magazine Tube Extension 2 Rd US Specifications
|
|
Vang Comp Systems Remington 870 Shotgun Magazine Tube Extension Remington 870 Magazine Tube Extension 2 Rd US Specifications
Shotgun Magazine Tube Extensions by Vang
|
Technical data & information: Short, screw-on magazine extensions add one or two additional rounds to tactical and sporting shotguns without increasing overall gun length. Replaces factory magazine cap with no permanent modifications. Machined from solid steel bar stock for a much stronger system to resist dents. Included sling loop can be installed for left- or right-handed shooters. Includes a smooth feeding stainless steel follower for enhanced reliability. Available for remington 870/1100/11-87. Mfg: vang comp systems specs: steel, black matte finish. Includes extension tube, follower, and extended magazine spring. Accepts 1βό" slings. 12 gauge only. 1-shot 2βό" (5.9cm) long. 2-shot 6-3⁄16" (15.7) long. Fits remington 870/1100/11-87. US specification & reliable quality shotgun magazine tube extensions by Vang. Part Nr: 100-003-056.
Indicative Price: USD 69.99
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more high specification gun & shooting items : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Vang Comp Systems Mossberg 590 Shotgun Magazine Tube Extension Mossberg 590 Magazine Tube Extension 1 Rd US Specifications
USD 79.99
(Indicative price - actual current price possibly lower)
Shotgun Magazine Tube Extensions US Specifications
Technical data & information: Short, screw-on magazine extensions add one or two additional rounds to tactical and sporting shotguns without increasing overall gun length. Replaces factory magazine cap with no permanent modifications. Machined from solid steel bar stock for a much stronger system to resist dents. Included sling loop can be installed for left- or right-handed shooters. Includes a smooth feeding stainless steel follower for enhanced reliability. Available for mossberg 590a1 shotguns. Note: will not work with mossberg 590 shockwave firearms. Mfg: vang comp systems specs: steel, black matte finish. Includes extension tube, follower, and extended magazine spring. Accepts 1βό" slings. 12 gauge only. 1-shot 2βό" (5.9cm) long. US specification & reliable quality shotgun magazine tube extensions by Vang. Part Nr: 100-003-058.
More Details : click here
SEARCH this site : click here
|
|
|
Nordic Components Mxt Extension Tubes Only 12 Ga Mxt Extension Tube +2 12ga US Specifications
USD 33.2
(Indicative price - actual current price possibly lower)
Shotgun Magazine Tube Extensions US Specifications
Technical data & information: Nordic components mxt magazine extension tube. Mxt extension tube for changing magazine extension length and capacity available in variety of lengths between 2 and 9 (shell capacity measured with 2 3/4′ shells and may vary with shells of differing length) features relief groove to eliminate barrel clamp travel and ensure repeatable placement after disassembly relief groove is not centered and can be relocated by reversing the tube (thread pitch the same on both ends) includes only mxt tube may require purchase of new magazine spring if you are changing the capacity of your existing extension click this link to find the attachment nu mfg: nordic components specs: 1, 2, 3, 3b (for flush fit on 18.5′ barreled benelli m1, m2), 4, 5, 5b (for flush fit on 21′ barreled benelli m1, m2), 6, 7, 7b (for flush fit on 26′ barreled benelli m1, m2), 8, 8b (for flush fit on 28′ barreled benelli m1, m2), 9. US specification & reliable quality shotgun magazine tube extensions by Nordic. Part Nr: MXTTBS122.
More Details : click here
SEARCH this site : click here
|
|
|
Vang Comp Systems Remington 870 Shotgun Magazine Tube Extension Remington 870 Magazine Tube Extension 1 Rd US Specifications
USD 79.99
(Indicative price - actual current price possibly lower)
Shotgun Magazine Tube Extensions US Specifications
Technical data & information: Short, screw-on magazine extensions add one or two additional rounds to tactical and sporting shotguns without increasing overall gun length. Replaces factory magazine cap with no permanent modifications. Machined from solid steel bar stock for a much stronger system to resist dents. Included sling loop can be installed for left- or right-handed shooters. Includes a smooth feeding stainless steel follower for enhanced reliability. Available for remington 870/1100/11-87. Mfg: vang comp systems specs: steel, black matte finish. Includes extension tube, follower, and extended magazine spring. Accepts 1βό" slings. 12 gauge only. 1-shot 2βό" (5.9cm) long. 2-shot 6-3⁄16" (15.7) long. Fits remington 870/1100/11-87. US specification & reliable quality shotgun magazine tube extensions by Vang. Part Nr: 100-003-057.
More Details : click here
SEARCH this site : click here
|
|
|
Nordic Components Mxt Extension Tubes Only 12 Ga Mxt Extension Tube +5b 12ga US Specifications
USD 39.99
(Indicative price - actual current price possibly lower)
Shotgun Magazine Tube Extensions US Specifications
Technical data & information: Nordic components mxt magazine extension tube. Mxt extension tube for changing magazine extension length and capacity available in variety of lengths between 2 and 9 (shell capacity measured with 2 3/4′ shells and may vary with shells of differing length) features relief groove to eliminate barrel clamp travel and ensure repeatable placement after disassembly relief groove is not centered and can be relocated by reversing the tube (thread pitch the same on both ends) includes only mxt tube may require purchase of new magazine spring if you are changing the capacity of your existing extension click this link to find the attachment nu mfg: nordic components specs: 1, 2, 3, 3b (for flush fit on 18.5′ barreled benelli m1, m2), 4, 5, 5b (for flush fit on 21′ barreled benelli m1, m2), 6, 7, 7b (for flush fit on 26′ barreled benelli m1, m2), 8, 8b (for flush fit on 28′ barreled benelli m1, m2), 9. US specification & reliable quality shotgun magazine tube extensions by Nordic. Part Nr: MXTTBS125B.
More Details : click here
SEARCH this site : click here
|
|
|
Scattergun Technology Remington 870/1100/11 87 Extended Magazine Tube Remington 870/1100/11 87 Ext Mag Tube Left Side Loop 1rd US Specifications
USD 46.99
(Indicative price - actual current price possibly lower)
Shotgun Magazine Tube Extensions US Specifications
Technical data & information: Machined steel magazine extensions increase capacity without gunsmithing or permanent alterations to your remington 870, 1100 or 11-87 shotgun. Knurled, threaded collar screws onto the end of the mag tube. Includes high-performance, extended length magazine spring and an unbreakable, high-visibility, nylon follower. Loop models features a stationary loop on the left side of the extension to accept direct attachment of tactical-style slings without swivels. Qd stud models include a quick-detach, swivel stud mounted either in the center of the magazine cap or at the front of a plate below the extension to accept slings with quick-detach swivels. All models fit 12 gauge only. Mfg: scattergun technology specs: steel, gray parkerized finish. Fits remington 870/1100/11-87, 12 gauge only. 1-shot, 2" (5cm) long, 2-shot, 6" (15.2cm) long. US specification & reliable quality shotgun magazine tube extensions by Scattergun. Part Nr: SGETRH1.
More Details : click here
SEARCH this site : click here
|
|
|
Nordic Components Mxt Extension Tubes Only 12 Ga Mxt Extension Tube +7 12ga US Specifications
USD 33.2
(Indicative price - actual current price possibly lower)
Shotgun Magazine Tube Extensions US Specifications
Technical data & information: Nordic components mxt magazine extension tube. Mxt extension tube for changing magazine extension length and capacity available in variety of lengths between 2 and 9 (shell capacity measured with 2 3/4′ shells and may vary with shells of differing length) features relief groove to eliminate barrel clamp travel and ensure repeatable placement after disassembly relief groove is not centered and can be relocated by reversing the tube (thread pitch the same on both ends) includes only mxt tube may require purchase of new magazine spring if you are changing the capacity of your existing extension click this link to find the attachment nu mfg: nordic components specs: 1, 2, 3, 3b (for flush fit on 18.5′ barreled benelli m1, m2), 4, 5, 5b (for flush fit on 21′ barreled benelli m1, m2), 6, 7, 7b (for flush fit on 26′ barreled benelli m1, m2), 8, 8b (for flush fit on 28′ barreled benelli m1, m2), 9. US specification & reliable quality shotgun magazine tube extensions by Nordic. Part Nr: MXTTBS127.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Vang Comp Systems Remington 870 Shotgun Magazine Tube Extension Remington 870 Magazine Tube Extension 2 Rd US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
|
