Weaver Top Mount Rings 1" X High Satin Blue US Specifications
Gun Scope Rings by Weaver
|
Technical data & information: Heights: low and medium for scopes w/objective diameters to approximately 1.75"(44.45mm). High for objectives above 1.75". Extra high for scopes with objectives up to 60mm. Mfg: weaver specs: aluminum lower; steel cap, screws, crossbolt and nut. Satin blue, matte blue or brushed stainless finish. Height (above base): 1" diameter, low, .090" (2.28mm); med., .164" (4.16mm); high, .332" (8.43mm); x-high, .560" (14.2mm). 30mm diameter, low, .290" (7.3mm); high, .485" (12mm. US specification & reliable quality gun scope rings by Weaver. Part Nr: 49080.
 Indicative Price: USD 25.99
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more high specification gun & shooting items : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Brownells Picatinny Scope Rings 30mm High (1.25") Steel Rings US Specifications
USD 99.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: These rings are precision machined to true mil-std 1913 specs to fit picatinny-type bases such as brownells modular flattop riser mount and picatinny scope bases. No special wrenches needed for installation. Underside of ring is undercut with a rounded radius that offers extra clearance for finger tightening the nut and for final tightening with a standard socket or flat-blade screwdriver. Extra-strong u.S.-size hex nuts have a deep slot that provides maximum engagement of screwdriver blade to help prevent slippage and slot damage-you can even use a u.S. Quarter in a pinch. Crossbolt has a square shank that serves as a recoil lug to solidly engage scope base when properly installed mfg: brownells specs: rings sold in pairs. Models available to fit 1" and 30mm scope bodies. Steel, 4140 billet steel, black, matte, oxide finish. Aluminum, 6061 t6 aluminum billet, hardcoat anodized black, matte. Heights measured from top of base to center of ring: low, .825" (2.1cm); med., 1&quo. US specification & reliable quality gun scope rings by Brownells. Part Nr: 080-000-740.
More Details : click here
SEARCH this site : click here
|
|
|
Badger Ordnance Maximized Scope Rings 30mm Standard Aluminum Scope Rings US Specifications
USD 165.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Heavy duty 30mm steel rings, machined in pairs, serial numbered, and designed specifically to securely hold large, heavy scopes on hard-recoiling guns. Weaver-style clamp with big β½" nut really snugs ring to the mount. Ultra-high provides optimum height for ar-15, ar-10 and sr-25 rifles. Mfg: badger ordnance specs: black matte finish. Ring height measured from top of mount to center of ring; standard, .823" (2cm), medium, .885" (22.5mm), medium high, 1.0" (2.5cm), high, 1.125" (2.8cm), ultra high, 1.378" (3.5cm). Weights; standard, 6.6 oz (187 g), high, 9 oz. (255 g),. US specification & reliable quality gun scope rings by Badger. Part Nr: 30616.
More Details : click here
SEARCH this site : click here
|
|
|
Leupold Standard Rings 1" Low Extended Matte Standard Rings US Specifications
USD 32.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Classic steel, holds scope tightly. Fits leupold std, one- and two-piece bases, plus bases from burris, millett and redfield. Mfg: leupold specs: steel 1" (2.5cm), 26mm (1.02") or 30mm (1.18") i.D. Gloss, polished blue. Matte, matte blue. Silver, satin nickel. Height measurements are from top of base to center of ring: 1", 26mm and 30mm: super low, .550" (13.9mm). Low, .650" (16.5mm). Medium, .770" (19.55mm). High, .900" (22. US specification & reliable quality gun scope rings by Leupold. Part Nr: 49910.
More Details : click here
SEARCH this site : click here
|
|
|
Alaska Arms Ruger Quick Detach Rings Standard Qd Ruger Rings 1 Inch High US Specifications
USD 109.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Alaska arms quick release scope rings are exactly that-"quick release". A simple βό turn is all it takes to securely lock or to release the scope from the bases. This style of ring assures irons sights are reliably and quickly accessible for dangerous game rifles. Enables multiple scope setups for an individual rifle that can be quickly and reliably interchanged. American made on cnc machines using american steel to ensure precision for a lifetime of reliability and service. Standard qd rings fit ruger models no.1, 10/22 mag, 96/44, 77/22, 77/17, single six hunter, redhawk, mini-14, mini-30 ranch, mark ii pistol mfg: alaska arms, llc specs: scope objective diameter fitment: low, 32mm objective, med, 42mm objective, high, 52mm objective, extra high, 62mm objective. Finish: satin black. US specification & reliable quality gun scope rings by Alaska. Part Nr: R51LR51L.
More Details : click here
SEARCH this site : click here
|
|
|
Tps Products Tsr W Picatinny/Weaver Scope Rings Tsr W Aluminum Rings 1" Medium US Specifications
USD 86.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Tsr "w" series rings, precisely machined from an alloy steel billet, with tolerances held to .0002", give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to weaver-style or mil-std 1913 (picatinny) bases. Mfg: tps products, llc. Specs: alloy steel, black oxide finish to mil-c-13924 standards. 5/8" (15.8mm) wide. Height measured from top of base to center of ring. 30mm, low: .925" (23.5mm). US specification & reliable quality gun scope rings by TPS. Part Nr: 30621.
More Details : click here
SEARCH this site : click here
|
|
|
S&K Kontoured Verticle Split Rings Smooth Kontoured Verticle Rings 30mm Hi Matte US Specifications
USD 73.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: All s&k rings are fully machined out of solid steel bar stock, tumble finished to remove all burrs, and have a 3/8" diameter stud that locks into a 3/8" hole or slot in the base which provides windage adjustment. The rings are locked into position by tightening cooperative cone pointed set screws. The rings are precision bored diameter and, being machined rather than extruded or stamped, form a precision fit that will not slip under recoil. They are nicely contoured and trim in appearance. Rings are tumble finished and blued to achieve a military-type dull or nonglare black finish that matches the black anodized insta-mount bases. Bases need purchased separately. Mfg: s&k. US specification & reliable quality gun scope rings by S&K. Part Nr: V30HB.
More Details : click here
SEARCH this site : click here
|
|
|
Leupold Standard Rings 30mm Low Matte Standard Rings US Specifications
USD 41.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Classic steel, holds scope tightly. Fits leupold std, one- and two-piece bases, plus bases from burris, millett and redfield. Mfg: leupold specs: steel 1" (2.5cm), 26mm (1.02") or 30mm (1.18") i.D. Gloss, polished blue. Matte, matte blue. Silver, satin nickel. Height measurements are from top of base to center of ring: 1", 26mm and 30mm: super low, .550" (13.9mm). Low, .650 (16.5mm). Medium, .770" (19.55mm). High, .900" (22. US specification & reliable quality gun scope rings by Leupold. Part Nr: 51718.
More Details : click here
SEARCH this site : click here
|
|
|
Warne Mfg. Company 7.3/22 Rings 30mm Medium Matte 7.3/22 Quick Detach Rings US Specifications
USD 61.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: The strongest small bore scope rings available. Designed to fit a very wide selection of rifles and fit both 3/8" and 11mm dovetails. This is made possible by using a solid steel asymmetrical reversible clamp that can be flipped 180β° and used on wider or narrower dovetails for best fit. Features a 70/30 horizontal construction and are only 1/2" wide. Attachment is made to the dovetail using a single t-15 torx style fastener and have 2 of the same fasteners for the ring top strap holding the entire package together securely. Mfg: warne mfg. Company specs: steel, powder coated, black, matte or gloss finish. Height measured from top of base to inside, bottom of ring. Medium .406" (10.3mm) nominal high. High, .525" (13.3mm) nominal high. US specification & reliable quality gun scope rings by Warne. Part Nr: 314LM.
More Details : click here
SEARCH this site : click here
|
|
|
Talley Tactical Scope Rings 34mm High Matte Black Tactical Rings US Specifications
USD 179.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Heavy-duty scope rings are precision-machined from solid billet aluminum with dual recoil lugs to ensure your tactical scope won't budge under the heaviest recoil. Full-width ring caps are cut from the same billet as the bottom half of the ring for precise fit and held in place with four stainless steel allen head screws that won't work loose when properly tightened. Matching serial numbers ensure you always mate the cap with the bottom it came with. Locking bar, heavy-duty crossbolt and oversized, β½" hex nut locks the ring to any mil-std 1913 picatinny rail. Hard-anodized for extra surface strength, with a non-reflective matte black finish. Engraved front and back mfg: talley specs: 7075 t6 aluminum, hardcoat anodized, matte black, with 303 stainless steel screws, black finish. 1.9" (5cm) wide, .665" (16.8mm) thick. Models available for 1" (2.5cm) or 30mm o.D. Scope tubes. Heights measured from top of base to center of ring: low, 1" (2.5cm); high. US specification & reliable quality gun scope rings by Talley. Part Nr: BAT34H.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Weaver Top Mount Rings 1" X High Satin Blue US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
