Wolff Beretta 92/96 Recoil Springs Performance Pak US Specifications
Handgun Performance Enhancing Kits by Wolff
|
Technical data & information: For optimum reliability with hardball and hot handloads. Improves overall function by matching the spring to the specific loads being fired. 13lb., factory standard weight, recoil spring only. Recoil calibration pak:, 1 each 15 lb., 16 lb., 18 lb., and 20 lb. Extra power recoil springs, plus (3) extra power firing pin springs. Performance pak:, 1 each 10 lb. Reduced power, and (1) 15 lb. Extra power recoil spring, plus (1) extra power, firing pin spring and (1) 18 lb. Reduced power hammer spring. Mfg: wolff. US specification & reliable quality handgun performance enhancing kits by Wolff. Part Nr: 14030.
 Indicative Price: USD 13.99
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more high specification gun & shooting items : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Cylinder & Slide 1911 Trigger Pull Kits Tactical Match Kit US Specifications
USD 129.99
(Indicative price - actual current price possibly lower)
Handgun Performance Enhancing Kits US Specifications
Technical data & information: Each kit is tested on a series 70-style frame to make certain it will produce the specified pull weight with little or no fitting. Parts are wire edm cut from bar stock, honed and polished, then heat treated for years of service life. All profiles and through-holes are mechanically correct to function without hand fitting. Sear nose has correct relief angle, sear spring is narrowed to reduce pull weight. Exposed hammer edges on ultra-light, super?match and tactical ii are chamfered to minimize slide drag and clothing wear. Each kit contains a hammer, sear, disconnector, sear spring and hammer spring. Ultra light kit, 3.5 lb. Pull weight. Ultra light, skeletonized, hammer; relieved to pre mfg: cylinder & slide specs: ultra light kit: special die steel, in-the-white. Hammer: rc 50-53. .39 oz. (11.1 g) weight. Sear: .07 oz. (1.9 g) weight. Ultra light speed ii: tool steel, in-the-white. Hammer & sear: rc 50-55. .7 oz. (20g) total weight. Sear: .07 oz. (1.9 g) weight. Tactical ii kit: special tool ste. US specification & reliable quality handgun performance enhancing kits by Cylinder & Slide. Part Nr: CS085.
More Details : click here
SEARCH this site : click here
|
|
|
Ed Brown 1911 5 Piece Trigger Pull Kit Blued US Specifications
USD 85.99
(Indicative price - actual current price possibly lower)
Handgun Performance Enhancing Kits US Specifications
Technical data & information: These trigger pull kits include the ed brown parts needed for superior trigger function. The machined-from-barstock hammer features a long list of custom modifications for a match-quality trigger pull without a lot of work. Sear hooks are cut to height, then precision surface ground so just a light stoning is all that's necessary to achieve a crisp, clean-breaking trigger pull. Half-cock notch is narrowed to help prevent sear damage and pin holes are cnc-machined for location; lowered strut pin hole reduces full-cock spring pressure. Narrowed spur minimizes slide drag; larger-than-factory, commander-style opening reduces weight for a fast fall and even faster locktimes. Fully-chamfere mfg: ed brown. US specification & reliable quality handgun performance enhancing kits by Ed Brown. Part Nr: 896KIT5.
More Details : click here
SEARCH this site : click here
|
|
|
Apex Tactical Specialties Inc M&P Spring Kits Duty/Carry Spring Kit US Specifications
USD 19.9
(Indicative price - actual current price possibly lower)
Handgun Performance Enhancing Kits US Specifications
Technical data & information: Drop-in replacements for factory components enhance reliability and optimize the performance of your m&p for different applications. Same springs found in the action enhancement kits can be used as high-quality replacements for worn or tired factory springs. Duty/carry spring kit includes a trigger return spring, a slave pin to aid in installing the return spring and one sear spring. Competition spring kit adds a competition striker spring and gives a 3 lb. Trigger pull when used with the hard sear and ultimate striker kit. Mfg: apex tactical specialties inc specs: fits all m&p pistols, recent and older manufacture. Will not fit pistols adapted for sale in massachusetts. US specification & reliable quality handgun performance enhancing kits by Apex. Part Nr: 100066.
More Details : click here
SEARCH this site : click here
|
|
|
Wolff Trigger Group Competition Pak For Glock US Specifications
USD 9.99
(Indicative price - actual current price possibly lower)
Handgun Performance Enhancing Kits US Specifications
Technical data & information: Contains the correctly calibrated springs you need to lower pull weight and improve trigger pull quality of your glock pistol without complicated gunsmithing or permanent alterations. Installing this kit will not disable or diminish the effectiveness of the well-proven glock safety system. Designed specifically to meet the needs of competitive shooters; this alteration is not recommended for duty pistols. Mfg: wolff specs: steel. Includes one (1) each of the following springs: 4lb. Reduced power striker spring, reduced power safety block spring, and extra power trigger spring. Fits all models and calibers of glock pistols. US specification & reliable quality handgun performance enhancing kits by Wolff. Part Nr: 33230.
More Details : click here
SEARCH this site : click here
|
|
|
Apex Tactical Specialties Inc S&W M&P Action Enhancement Components Competition Kit .45 Acp US Specifications
USD 93.05
(Indicative price - actual current price possibly lower)
Handgun Performance Enhancing Kits US Specifications
Technical data & information: Drop-in replacements for factory components enhance reliability and optimize the performance of your m&p for different applications. Installing the competition kit yields a smooth, consistent, trigger pull of slightly less than 3 lbs., with shorter over-travel and faster reset than a factory-stock m&p. Retain the factory sear spring to get a slightly heavier 3β½ lb. Pull. Designed for idpa, uspsa, steel challenge, 3-gun, and similar types of action shooting competition. Not for duty, carry, or self-defense applications. Duty/carry kit delivers a smooth, consistent 5β½ lb. Trigger pull with less over-travel and shorter reset. Improves performance of your pistol while ma mfg: apex tactical specialties inc specs: kits include hard sear, ultimate striker block (see below), two sear springs (different sizes), and trigger return spring. Duty/carry kit also includes competition striker spring and aluminum slave pin for installing trigger return spring. Competition kits are for competition use only &nda. US specification & reliable quality handgun performance enhancing kits by Apex. Part Nr: 100060.
More Details : click here
SEARCH this site : click here
|
|
|
Apex Tactical Specialties Inc S&W M&P Action Enhancement Components Competition Kit 9mm/.40 S&W/.357 Sig US Specifications
USD 93.05
(Indicative price - actual current price possibly lower)
Handgun Performance Enhancing Kits US Specifications
Technical data & information: Drop-in replacements for factory components enhance reliability and optimize the performance of your m&p for different applications. Installing the competition kit yields a smooth, consistent, trigger pull of slightly less than 3 lbs., with shorter over-travel and faster reset than a factory-stock m&p. Retain the factory sear spring to get a slightly heavier 3β½ lb. Pull. Designed for idpa, uspsa, steel challenge, 3-gun, and similar types of action shooting competition. Not for duty, carry, or self-defense applications. Duty/carry kit delivers a smooth, consistent 5β½ lb. Trigger pull with less over-travel and shorter reset. Improves performance of your pistol while ma mfg: apex tactical specialties inc specs: kits include hard sear, ultimate striker block (see below), two sear springs (different sizes), and trigger return spring. Duty/carry kit also includes competition striker spring and aluminum slave pin for installing trigger return spring. Competition kits are for competition use only &nda. US specification & reliable quality handgun performance enhancing kits by Apex. Part Nr: 100072.
More Details : click here
SEARCH this site : click here
|
|
|
Cylinder & Slide 1911 3 Piece Drop In Trigger Pull Set 1911 Tactical Ii Hammer Set Ss US Specifications
USD 157.99
(Indicative price - actual current price possibly lower)
Handgun Performance Enhancing Kits US Specifications
Technical data & information: Commander-style hammer, tactical sear, and ultra match disconnector drop-in to deliver reliable ignition and improved trigger function on any 1911 auto. Each component is precision edm cut to ±.0005" tolerances from cylinder & slide's special tool steel. All parts are honed and polished, then heat-treated to rc 50-53 for long service life. Tactical ii set features the popular tactical ii chamfered hammer in-the-white with standard .018" long hammer hooks for a match-grade trigger pull. Available in tool steel or high-grade stainless steel alloy. Marsoc set includes a blued tactical ii-style hammer with longer .023" hammer hooks for added sear engagement and mfg: cylinder & slide specs: special billet tool steel alloy (ts), hardened to rc 50-53, or stainless steel (ss), hardened to rc 50-55, both in-the-white. Sets include hammer, sear, and disconnector. Tactical ii all parts in-the-white. .018" long hammer hooks. Marsoc hammer blued, disconnector an. US specification & reliable quality handgun performance enhancing kits by Cylinder & Slide. Part Nr: CS0211.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Wolff Beretta 92/96 Recoil Springs Performance Pak US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
