Wolff Government Model Variable Power Recoil Spring 20 Lb. Wolff Variable Power Spring For Govt. Model US Specifications
|
|
Wolff Government Model Variable Power Recoil Spring 20 Lb. Wolff Variable Power Spring For Govt. Model US Specifications
Handgun Recoil Springs by Wolff
|
Technical data & information: Variable rate springs function correctly with a wider range of loads than fixed rate springs can. Rate increases as spring is compressed; gives greater protection against frame battering, more consistent lockup and improved feeding, while allowing easier manual cycling of the action. Recoil calibration pak contains 1 each of seven different springs; 16 lb., 15 lb., 14 lb., 13 lb., 11 lb., 10 lb. And 9 lb., plus three extra power firing pin springs. Individual spring pak contains one variable power recoil spring and one extra power firing pin spring. Factory weight is 16 lb. Mfg: wolff. US specification & reliable quality handgun recoil springs by Wolff. Part Nr: 42420.
Indicative Price: USD 8.99
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more high specification gun & shooting items : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Ismi Beretta Recoil Spring 14 Lb. Cs Beretta Spring US Specifications
USD 9.99
(Indicative price - actual current price possibly lower)
Handgun Recoil Springs US Specifications
Technical data & information: Cad designed and built to aerospace specifications from chrome silicon, corrosion resistant, stainless steel or chrome vanadium for maximum durability, consistency and reliable performance. Built to aerospace specifications; heat treated, shot peened and fully stress relieved to minimize spring set. Beretta recoil spring, chrome silicon (cs) springs wound for 14 and 16 lb. Beretta models 92 & 96. Mfg: ismi specs: chrome silicon or stainless steel round wire, chrome vanadium flat wire. US specification & reliable quality handgun recoil springs by ISMI. Part Nr: 92R14.
More Details : click here
SEARCH this site : click here
|
|
|
Wolff Type B Factory Replacement Spring For Hardball Loads 16 Lb. Govt. Model Recoil Spring 10 Pak US Specifications
USD 22.99
(Indicative price - actual current price possibly lower)
Handgun Recoil Springs US Specifications
Technical data & information: Like all wolff springs, these for the 1911 auto in .45, .38 super or 9mm are the finest, most reliable, longest lasting ones available. The springs of choice for most of the nation's top builders. Except where noted, all recoil springs are supplied with an extra power firing pin spring that keeps the firing pin stop in place and prevents firing pin "float"; an addition recommended by pistolsmith bill wilson. Type b, factory replacement spring for hardball loads exactly matches the specs of the original factory spring. Govt. Model does not come with extra power firing pin spring. Commander may also be used as an extra power spring for 9mm/.38 super pistols and comes with an xp firing pin mfg: wolff. US specification & reliable quality handgun recoil springs by Wolff. Part Nr: 95060.
More Details : click here
SEARCH this site : click here
|
|
|
Wolff Smith & Wesson M&P Recoil Springs M&P Xp Recoil Calibration Pak US Specifications
USD 31.99
(Indicative price - actual current price possibly lower)
Handgun Recoil Springs US Specifications
Technical data & information: For full-size 9mm, .40 s&w and .357 sig pistols. Factory spring is 16 lbs. Use a lighter-weight spring with light loads or to soften felt recoil for faster recovery in competition. Use a heavier-weight spring with "hot" loads or to enhance cycling reliability. Note: these springs require a full-length, non-captive guide rod. Each recoil spring, including those in calibration kits, comes with a factory weight striker spring. Calibration paks let you try out different weights to see which works best in your pistol. Extra power (xp) recoil calibration pak contains one each 17, 19, 20, 22, and 24 lb. Recoil spring, plus five replacement, factory-weight striker springs. Reduced po mfg: wolff. US specification & reliable quality handgun recoil springs by Wolff. Part Nr: 13220.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Beretta 92/96 Recoil Springs 13 Lb. Recoil Spring US Specifications
USD 8.99
(Indicative price - actual current price possibly lower)
Handgun Recoil Springs US Specifications
Technical data & information: For optimum reliability with hardball and hot handloads. Improves overall function by matching the spring to the specific loads being fired. 13lb., factory standard weight, recoil spring only. Recoil calibration pak:, 1 each 15 lb., 16 lb., 18 lb., and 20 lb. Extra power recoil springs, plus (3) extra power firing pin springs. Performance pak:, 1 each 10 lb. Reduced power, and (1) 15 lb. Extra power recoil spring, plus (1) extra power, firing pin spring and (1) 18 lb. Reduced power hammer spring. Mfg: brownells. US specification & reliable quality handgun recoil springs by Brownells. Part Nr: 40613.
More Details : click here
SEARCH this site : click here
|
|
|
Colt 1911 Government 9mm Dual Recoil Spring 1912 Recoil Spring Government 9mm Inner US Specifications
USD 2.49
(Indicative price - actual current price possibly lower)
Handgun Recoil Springs US Specifications
Technical data & information: These are replacement inner and outer recoil springs for colt 1911 pistols chambered in 9mm luger that use the new colt dual spring recoil system originally developed in 2011 for the usmc m45a1 pistol. The inner and outer springs work together to provide enhanced reliability and extended recoil spring service life up to 15,000 rounds. (the standard interval for replacing standard 1911 recoil springs is 5,000 rounds.) this longer service life is particularly helpful to high-volume shooters who shoot their pistols a lot, military and law enforcement personnel, as well as competition shooters. Other benefits of the dual recoil spring system are a gentler recoil impulse (which aid mfg: colt. US specification & reliable quality handgun recoil springs by Colt. Part Nr: SP300570.
More Details : click here
SEARCH this site : click here
|
|
|
Ismi Recoil Springs For Glock 17 Lb. Spring For Glock 17 US Specifications
USD 12.99
(Indicative price - actual current price possibly lower)
Handgun Recoil Springs US Specifications
Technical data & information: Cad designed and built to aerospace specifications from chrome silicon, corrosion resistant, stainless steel or chrome vanadium for maximum durability, consistency and reliable performance. Built to aerospace specifications; heat treated, shot peened and fully stress relieved to minimize spring set. Glock recoil springs, flat wire, chrome vanadium alloy,, wound to fit factory diameter guide rod of .250" or less. Glock 17 fits large frame 17,17l,20,21,22,24,31,35. Factory weight is 17 lb. Glock 19 fits 19,23,25,32. Factory weight is 18 lb. Mfg: ismi specs: chrome silicon or stainless steel round wire, chrome vanadium flat wire. US specification & reliable quality handgun recoil springs by ISMI. Part Nr: GL17.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Wolff Government Model Variable Power Recoil Spring 20 Lb. Wolff Variable Power Spring For Govt. Model US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
|
