Yankee Hill Machine Co. Ar 15/M16 9mm Threaded Barrels 5.5" 9mm Ar Barrel Threaded US Specifications
Rifle Barrels by Yankee Hill
|
Technical data & information: One of these durable, 4140 heat-treated carbon steel barrels is a critical component in converting an ar-15 into a fast-shooting, low-recoil carbine or pistol chambered in 9x19mm luger. One-piece, fully machined barrel extension provides for reliable feeding/chambering. 1-14" twist 6-groove rifling is optimized for the 9x19mm round for optimal performance. Available in 16", 10.5", and 5.5" lengths. Mfg: yankee hill machine co., inc. Specs: 4140 steel, heat-treated to rc 25-32, matte black finish. .750" (1.9cm) o.D. At gas block. 1-14" twist rifling. ß½"-36 muzzle threads. US specification & reliable quality rifle barrels by Yankee Hill. Part Nr: YHM92T.
 Indicative Price: USD 148.99
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more high specification gun & shooting items : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Bravo Company Ar 15 Enhanced Lightweight Barrel Assembly Kits Bcm Ar 15 14.5" Enhanced Lightweight Barrel Assembly US Specifications
USD 342.99
(Indicative price - actual current price possibly lower)
Rifle Barrels US Specifications
Technical data & information: Brownells is proud to partner with bcm to offer these exclusive enhanced lightweight barrel assembly kits. Available in either 14.5" or 16.1" lengths with a mid-length gas system, the enhanced profile offers a number of advantages over the usgi type of profile, highlighting a continuous taper designed for optimal weight, balance, and performance. The enhanced profile does away with the sharp handguard cap shoulder for improved barrel harmonics and improved accuracy, and also features a tapered profile out front, for easier maneuverability. Included in both kits is a phosphate finished, steel, .625 bcm low profile gas block and a bcm mid-length gas tube to allow you to complete mfg: bravo company. US specification & reliable quality rifle barrels by Bravo. Part Nr: BCMELW14KIT.
More Details : click here
SEARCH this site : click here
|
|
|
E.R. Shaw Ruger 10/22 Target Barrels Blued US Specifications
USD 97.99
(Indicative price - actual current price possibly lower)
Rifle Barrels US Specifications
Technical data & information: Heavy contour, premium-grade "bentz" chambered .22 lr barrel provides an immediate improvement in accuracy over your original factory barrel. Close-tolerance bentz chamber combines the accuracy of a match grade chamber with the reliable cycling of a standard factory chamber. Extra-heavy, untapered .920" o.D. Provides maximum stability for greater shot-to-shot consistency. Use with standard or match grade ammunition; not for use with cci stinger ammunition. Minor fitting to stock may be required. Chrome-moly models have polished blue finish and are available in an 18" length with dished crown or a 16 β½" length with β½"-28 tpi threaded muzzle for mfg: e.R. Shaw specs: 4140 chrome-moly steel, blued, polished finish, or 416 stainless steel (ss), natural matte finish. .920" (2.34cm) o.D. 18" long (45.7cm). Blued barrel w/threaded muzzle 16β½" (42cm) long. ß½"-28 tpi thread. US specification & reliable quality rifle barrels by E.R. Shaw. Part Nr: 100-004-745.
More Details : click here
SEARCH this site : click here
|
|
|
Shilen Fitted Barrels For Small Ring Mauser 93 96 .250 Sav. #2 Contour 10 Twist US Specifications
USD 292.99
(Indicative price - actual current price possibly lower)
Rifle Barrels US Specifications
Technical data & information: A "no lathe" way to turn a surplus small ring 93-96 into a sporter. Already threaded with the chamber left slightly short. After installation, use a hand-turned finish reamer to deepen until headspace is perfect. (reamer and headspace gauges required.) made to our specifications by shilen.Note: these actions are not as strong as the mauser 98. The barrels listed are chambered for low pressure cartridges. Guns using them should be fired only with standard, factory-equivalent rounds. Handloads must not exceed saami specs. Mfg: shilen specs: cm steel. .980" diameter x .645" long,, 12 tpi, "v" thread. 26" (66cm) long. US specification & reliable quality rifle barrels by Shilen. Part Nr: 250102CM.
More Details : click here
SEARCH this site : click here
|
|
|
Rainier Arms Ar 15/M16 223 Wylde Match Barrels 16" 223 Wylde Match Mid Length Barrel US Specifications
USD 271.99
(Indicative price - actual current price possibly lower)
Rifle Barrels US Specifications
Technical data & information: Rainier arms match barrels are machined from the ground up to meet their exacting standards. Beginning with a precision match blank with a 1-8 twist, rainier then machines these barrels to the highest quality and contour to suite your needs. Barrels are chambered in 223 wylde, to get the upmost performance out of your ammunition. The 1-8 twist accommodates a wide variety of bullet weights, and rainier arms guarantees these to shoot sub-moa with match grade ammunition. Barrels feature a stainless steel, bead blasted finish, for a unique appearance. Available lengths include 14.5", 16" and 18". Barrel extensions feature m4 feed ram mfg: rainier arms. US specification & reliable quality rifle barrels by Rainier. Part Nr: RA273.
More Details : click here
SEARCH this site : click here
|
|
|
Criterion Barrels Inc Ar 15/M16 Hybrid Rifle Barrels 16" Hybrid Carbine Barrel W/ Headspaced Bolt US Specifications
USD 390.99
(Indicative price - actual current price possibly lower)
Rifle Barrels US Specifications
Technical data & information: The hybrid contour ar-15 barrels offer an ideal configuration for those seeking extreme accuracy without the added weight of an hbar contour. An indent is provided opposite the gas port to enable easy installation. Also included is an m4 barrel extension. These barrels accept muzzle devices with a 1/2x28 thread. Chambers are finished, but barrels should be headspaced and installed by a qualified gunsmith. Included are a headspaced bcm bolt assembly with your criterion chrome-lined barrel. The bcm bolt is mpi tested, includes tool steel machined extractor, bcm extractor spring and is shot peened for increased strength. Mfg: criterion barrels inc specs: milspec carpenter no. 158 steel; hpt (high pressure test/proof); mpi bolt (magnetic particle inspected); shot peened bolt; tool steel extractor; bcm extractor spring; black extractor insert; mil-spec o-ring, .750 id". US specification & reliable quality rifle barrels by Criterion. Part Nr: 15160HY6B.
More Details : click here
SEARCH this site : click here
|
|
|
Bushmaster Firearms Int.Llc. 5.56mm Acr Barrel Conversion 18.5" US Specifications
USD 578.99
(Indicative price - actual current price possibly lower)
Rifle Barrels US Specifications
Technical data & information: The bushmaster acr barrel conversions are factory replacement barrel assemblies available in different lengths to meet your needs. These bushmaster acr barrel conversions are set up with the quick detach barrel system that allows for a simple and convenient barrel change. 4150 chrome moly vanadium barrels 1-7" twist available in 18.5", 16.5", 14.5" and 10.5" bbl. The bushmaster acr barrel conversions are drop-in ready and come with the quick change lever, entire piston and op-rod assembly, gas block and comes with an aac 51 t flash hider. All nfa rules apply. Mfg: bushmaster firearms int.Llc. US specification & reliable quality rifle barrels by Bushmaster. Part Nr: 91750.
More Details : click here
SEARCH this site : click here
|
|
|
Sig Mcx 300 Aac Blackout Cal X Kit Mcx 300 Aac Blackout 16 Tapered Lug US Specifications
USD 599.99
(Indicative price - actual current price possibly lower)
Rifle Barrels US Specifications
Technical data & information: Sig sauer offers caliber exchange kits in various barrel lengths. All nfa rules apply to installation of these upper assemblies to lower receivers and caliber exchange kits to upper receivers. Upper assemblies and caliber exchange kits with barrel lengths less than 16 "may only be affixed to lower receivers which (1) are not recorded as a rifle lower by the manufacturer and do not have a stock attached to the lower receiver or (2) registered with the batfe as a short barreled rifle (sbr). Please check with your local and state municipalities for any further regulatory requirements. It is your responsibility as the buyer of these components to make sure you comply with all nfa r mfg: sig sauer. US specification & reliable quality rifle barrels by SIG Sauer. Part Nr: CALXMCX16B30.
More Details : click here
SEARCH this site : click here
|
|
|
Faxon Firearms Ar 15 Big Gunner Barrels 6.5 Creedmoor Big Gunner Barrel 6.5 Creedmoor 18 Rifle Length Black US Specifications
USD 274.55
(Indicative price - actual current price possibly lower)
Rifle Barrels US Specifications
Technical data & information: The faxon big gunner 6.5 creedmoor rifle barrel offers an excellent balance of maneuverable weight and accuracy potential. Faxon machines each big gunner barrel from triple stress-relieved 416r stainless steel, and finishes it with a tough, wear-resistant matte black qpq nitride finish. Faxon's big gunner 6.5 creedmoor rifle barrel profile is a blend of faxon's government and pencil profiles, matching the gov't taper from the extension to the gas block, with a pencil profile from the block to the muzzle. Removing the weight from the front mitigates muzzle whip, while keeping material at the rear maximizes rigidity and resistance to heat distortion. It keeps the cent mfg: faxon firearms. US specification & reliable quality rifle barrels by Faxon. Part Nr: 10BC8R18NGQ5R.
More Details : click here
SEARCH this site : click here
|
|
|
Ballistic Advantage Ar 15 5.56 Barrels Hanson Profile 5.56 Barrel Hanson 14" Carbine Gas System 1 7 1/2 28 US Specifications
USD 213.75
(Indicative price - actual current price possibly lower)
Rifle Barrels US Specifications
Technical data & information: Ballistic advantage's hanson profile ar-15 barrels give you the same harmonic advantages of a heavy-profile barrel without the extra weight. Developed by ballistic advantage's barrel guru, clint hanson, this unique profile eliminates sharp shoulders and smooths tapers to symmetrically limit barrel "whip" caused by vibrations and flexing during prolonged shooting. The hanson profile controls barrel harmonics, allowing the barrel to return quickly to its "home" position after each shot, which is extremely beneficial for follow up shots at a high rate of fire or even full-auto fire. The result: the rigidity of a heavy barrel in a lightweight profile. Mfg: ballistic advantage. US specification & reliable quality rifle barrels by Ballistic. Part Nr: BABL556027F.
More Details : click here
SEARCH this site : click here
|
|
|
Rim Country Manufacturing Inc Mp5k/Pdw Barrel 9mm 5.85" Mp5k/Pdw 3 Lug 1/2 32 Barrel 9mm 5.85in US Specifications
USD 109.99
(Indicative price - actual current price possibly lower)
Rifle Barrels US Specifications
Technical data & information: Rcm ensures the quality of your mp5k / pdw barrel by machined it from a cold hammer forged blank. Each barrel is treated with a black nitride finish, resulting in superior corrosion resistance and hardness. Made to exact hk specifications, including a 16 flute chamber provides the highest quality us made mp5k / pdw barrels possible. Ensures the quality of your mp5k / pdw barrel by machined it from a cold hammer forged blank. Each barrel is treated with a black nitride finish, resulting in superior corrosion resistance and hardness. Made to exact hk specifications, including a 16 flute chamber provides the highest quality us made mp5k / pdw barrels possible. Available with a 3 lug ada mfg: rim country manufacturing inc. US specification & reliable quality rifle barrels by Rim. Part Nr: RCMGBMP31.
More Details : click here
SEARCH this site : click here
|
|
|
White Oak Armament Ar 15/M16 223 Wylde Match Barrels 18" Rifle Spr Barrel US Specifications
USD 239.99
(Indicative price - actual current price possibly lower)
Rifle Barrels US Specifications
Technical data & information: Precision-machined stainless steel barrels feature a .223 wylde chamber that helps maximize the long-range performance of your ar-15 with both .223 remington and 5.56x45mm nato ammunition. With 6-groove, 1-7" button rifling for accuracy and m4-type feed ramps for reliable feeding, these barrels help you reach out to distant targets with issued or magazine-length ammunition. The 18" barrels offer the special purpose rifle (spr) profile designed to optimize accuracy out to 600 meters, and are available with mid-length or rifle-length gas systems. Sdm barrel features a heavy, fluted profile under the handguards, for added strength and rigidity. Threaded muzzle accepts a varie mfg: white oak armament specs: stainless steel, natural finish. .750" (1.9cm) o.D. At gas port. Barrel extension .999" (2.5cm) o.D. 6-groove, 1-7" rifling. Muzzle threads: β½"-28 tpi. 16" carbine, 2 lbs. 2oz. (963g). 18" mid-length/rifle, 2 lbs. 9oz. (1.1kg).Sdm. US specification & reliable quality rifle barrels by White. Part Nr: 5SPRR.
More Details : click here
SEARCH this site : click here
|
|
|
Faxon Firearms Ar 15 Barrels 6.5 Creedmoor Heavy Profile Barrel 6.5 Creedmoor 20 Rifle Length Black US Specifications
USD 388.55
(Indicative price - actual current price possibly lower)
Rifle Barrels US Specifications
Technical data & information: The faxon firearms 6.5 creedmoor heavy fluted barrel is manufactured from triple stress-relieved 416r stainless steel with straight flutes machined into the exterior surface. Fluting reduces weight while actually adding to the stiffness of the barrel and providing enhanced cooling properties to resist distortion of the barrel as it heats up. Faxon puts each 6.5 creedmoor heavy fluted barrel through a battery of tests, including magnetic particle inspection (mpi) to ensure the barrel you install on your rifle is free of hidden flaws that could compromise accuracy or service life. Available in 18", 20", 22", and 24" lengths matte black qpq nitride co mfg: faxon firearms. US specification & reliable quality rifle barrels by Faxon. Part Nr: 10BC8R20FHQ5R.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Ar 15 Barrels 224 Valkyrie Stainless Steel 224 Valkyrie Barrel 18" Stainless Steel Rifle Gas System US Specifications
USD 249.99
(Indicative price - actual current price possibly lower)
Rifle Barrels US Specifications
Technical data & information: Enhancing the long-range capability of the ar-15 platform has been achieved with the launch of the impressive .224 valkyrie, and now the brownells stainless steel .224 valkyrie ar-15 barrels allows ar-15 builders to put together their own custom rifle that reaps the benefits of this precision round. The brownells stainless steel .224 valkyrie ar-15 barrels are machined with a 1:7-inch rate of twist and are designed to make use of a rifle-length gas system. Barrel lengths are available in 18 or 24 inches. Medium-contour barrel design 18-inch barrel weight: 2.23 pounds 24-inch barrel weight: 2.91 pounds. .750" gas block the brownells stainless steel mfg: brownells. US specification & reliable quality rifle barrels by Brownells. Part Nr: BN15BV7R18NMMBE.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Yankee Hill Machine Co. Ar 15/M16 9mm Threaded Barrels 5.5" 9mm Ar Barrel Threaded US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
