Apex Tool Group American Pattern Hand Files 2nd Cut 8" US Specifications
Gunsmith Files by Apex
|
Technical data & information: One of the basic gun work files and an excellent, all purpose file for dressing, striking off, shaping and metal removing of all types. Parallel in width, taper slightly in thickness. Double-cut sides; one edge is single-cut, other is safe. Mfg: apex tool group specs: 8" (20.3cm) american, 25/32" (19.8mm) wide x 7/32" (5.6mm) thick. 10" (25.4cm) american, 31/32" (24.6mm) wide x βό" (6.3mm) thick. US specification & reliable quality gunsmith files by Apex. Part Nr: 05886N.
 Indicative Price: USD 15.99
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more high specification gun & shooting items : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Brownells Economy Needle File Set US Specifications
USD 29.99
(Indicative price - actual current price possibly lower)
Gunsmith Files US Specifications
Technical data & information: Good quality needle files in assortment of 12 different shapes. Recommended for occasional use, or where professional gunsmith files are not needed or justified. Handy plastic roll case. Knurled handles fit needle file handle. Sold in sets only. Mfg: brownells specs: set contains 1 each of the following shapes: barrette, hand, hand with round edges, warding, crochet, three square, square, half round, round, knife, slitting and crossing. Approximately 5β½" overall length. Shank 2β½" x 1/8" diameter. Fine cut. US specification & reliable quality gunsmith files by Brownells. Part Nr: 423153.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Metal Checkering Files 50 Lpi (#2) US Specifications
USD 53.99
(Indicative price - actual current price possibly lower)
Gunsmith Files US Specifications
Technical data & information: The only way to get true, accurate line spacing when checkering backstraps, triggerguards, grip frames, ribs and hammer spurs; anywhere an improved gripping surface is needed. Finer cuts give a nice matting effect to reduce glare and light distortion. Procedure is very similar to wood checkering. Layout your master lines (or use a guide like our .45 checkering guide), then establish the pattern by moving the file a few teeth each time using the previous lines as the guide. Once the pattern is fully laid out, bring to final depth with a 60β° needle file. Mfg: brownells specs: 8" (20.3cm) length x β½" (12.7mm) wide. Cutting area: 6" (15.2cm) x β½" (12.7mm). US specification & reliable quality gunsmith files by Brownells. Part Nr: 31043.
More Details : click here
SEARCH this site : click here
|
|
|
Apex Tool Group Swiss Pattern Barrette Files 4" Barrette #0 Cut US Specifications
USD 29.99
(Indicative price - actual current price possibly lower)
Gunsmith Files US Specifications
Technical data & information: These beautiful little swiss pattern files are made especially for getting into tight places, coming exactly up to right angles, working over dovetails, slots and other precision filing. Flat side has double-cut teeth. Back and edges are safe (no teeth) with edges beveled back on 33β° angle. Taper from maximum width shown below to long point. Mfg: apex tool group specs: 4" (10.2cm), 1/2" (12.7mm) wide. #0 or #1 cut. 6" (15.2cm), 11/16" (17.5mm) wide. #0, #1 or #2 cut. Vkhilfef corresponds to swiss cut no. 1. US specification & reliable quality gunsmith files by Apex. Part Nr: 35031N.
More Details : click here
SEARCH this site : click here
|
|
|
Apex Tool Group Swiss Pattern Barrette Files 6" Barrette #2 Cut US Specifications
USD 38.99
(Indicative price - actual current price possibly lower)
Gunsmith Files US Specifications
Technical data & information: These beautiful little swiss pattern files are made especially for getting into tight places, coming exactly up to right angles, working over dovetails, slots and other precision filing. Flat side has double-cut teeth. Back and edges are safe (no teeth) with edges beveled back on 33β° angle. Taper from maximum width shown below to long point. Mfg: apex tool group specs: 4 (10.2cm), 1/2" (12.7mm) wide. #0 or #1 cut. 6" (15.2cm), 11/16" (17.5mm) wide. #0, #1 or #2 cut. Vkhilfef corresponds to swiss cut no. 1. US specification & reliable quality gunsmith files by Apex. Part Nr: 35073.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Metal Checkering Files 25 Lpi (#00) US Specifications
USD 75.99
(Indicative price - actual current price possibly lower)
Gunsmith Files US Specifications
Technical data & information: The only way to get true, accurate line spacing when checkering backstraps, triggerguards, grip frames, ribs and hammer spurs; anywhere an improved gripping surface is needed. Finer cuts give a nice matting effect to reduce glare and light distortion. Procedure is very similar to wood checkering. Layout your master lines (or use a guide like our .45 checkering guide), then establish the pattern by moving the file a few teeth each time using the previous lines as the guide. Once the pattern is fully laid out, bring to final depth with a 60β° needle file. Mfg: brownells specs: 8" (20.3cm) length x β½" (12.7mm) wide. Cutting area: 6" (15.2cm) x β½" (12.7mm). US specification & reliable quality gunsmith files by Brownells. Part Nr: 3104025.
More Details : click here
SEARCH this site : click here
|
|
|
Friedr. Dick Gmbh Professional Gunsmith Needle File Set Professional Gunsmith Needle File Cut #1 Three Square US Specifications
USD 13.99
(Indicative price - actual current price possibly lower)
Gunsmith Files US Specifications
Technical data & information: Finest professional quality gunsmith needle files in set of 12 assorted shapes. Made of best materials to rigid quality standards. Cuts are deep and durable. Knurled handles for no-slip use or convenient lock-up in needle file handles shown below. Comes in heavy-duty, see-through, pocketed roll with snap closure. Protects files, yet gives immediate access to shape wanted. Sold in sets or singles. Mfg: friedr. Dick gmbh specs: set contains 1 each of the following shapes: barrette, hand, hand with round edges, warding, crochet, three square, square, half round, round, knife, slitting and crossing. Approx. 5-1/2" (14cm) overall length. Shank 2-3/8" (6cm) x 1/8" (3.2mm) dia. US specification & reliable quality gunsmith files by Freed. Part Nr: 21321410.
More Details : click here
SEARCH this site : click here
|
|
|
Friedr. Dick Gmbh Professional Gunsmith Needle File Set Professional Gunsmith Needle File Cut #1 Hand US Specifications
USD 11.99
(Indicative price - actual current price possibly lower)
Gunsmith Files US Specifications
Technical data & information: Finest professional quality gunsmith needle files in set of 12 assorted shapes. Made of best materials to rigid quality standards. Cuts are deep and durable. Knurled handles for no-slip use or convenient lock-up in needle file handles shown below. Comes in heavy-duty, see-through, pocketed roll with snap closure. Protects files, yet gives immediate access to shape wanted. Sold in sets or singles. Mfg: friedr. Dick gmbh specs: set contains 1 each of the following shapes: barrette, hand, hand with round edges, warding, crochet, three square, square, half round, round, knife, slitting and crossing. Approx. 5-1/2" (14cm) overall length. Shank 2-3/8" (6cm) x 1/8" (3.2mm) dia. US specification & reliable quality gunsmith files by Freed. Part Nr: 21121410.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Apex Tool Group American Pattern Hand Files 2nd Cut 8" US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
