Aro Tek Armorer's Tools For Glock 3/16" Nut Driver US Specifications
Gunsmith Handgun Takedown Tools by Aro-Tek
|
Technical data & information: Precision-made tools that will take care of most any field repair on the entire family of glock pistols. Kit includes: 3/16" nut driver for easy, front sight removal; .050" allen wrench for rear sight removal, installation and adjustment; and a 3/32" punch for complete takedown. Tools feature hardened shafts and comfortable aluminum handles. Comes in convenient, snap-top, heavy-duty vinyl pouch. Mfg: aro-tek specs: shaft-steel, blued. Handle, aluminum, anodized red. 3ß?" (9.5cm) long. 3/16" nut driver available separately. US specification & reliable quality gunsmith handgun takedown tools by Aro-Tek. Part Nr: 3008003.
 Indicative Price: USD 24.99
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more high specification gun & shooting items : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Majestic Arms Ltd. Ruger Mark I/Ii/Iii Speed Strip Kit Mark Iii Speed Strip Kit US Specifications
USD 57.99
(Indicative price - actual current price possibly lower)
Gunsmith Handgun Takedown Tools US Specifications
Technical data & information: Makes field stripping your ruger .22 pistol faster and easier by enabling rapid disassembly with a single allen wrench for routine cleaning and maintenance. Replaces the factory hammer and sticky bolt stop pin that make bolt removal a real chore. Replacement parts are precision machined from high-grade stainless steel to tolerances that meet or exceed the factory parts. Requires no permanent modification to your pistol; gunsmith installation recommended. The 3.2 conversion kit will fit any ruger .22 auto pistol and allows mk iii owners to safely omit the magazine disconnect feature. This kit is supplied with a new hammer pivot bushing, which reduces pre-travel by 65%. Mfg: majestic arms, ltd. Specs: stainless steel, natural silver finish. Kit includes replacement hammer and bolt stop pin, plus allen wrench and illustrated installation instructions. Mark i/mark ii fits ruger mark i, ii, and 22/45 pistols. Mark iii fits ruger mark iii pistol. US specification & reliable quality gunsmith handgun takedown tools by Majestic. Part Nr: 941-000-002.
More Details : click here
SEARCH this site : click here
|
|
|
Majestic Arms Ltd. Ruger Mark I/Ii/Iii Speed Strip Kit Mark I/Ii Speed Strip Kit US Specifications
USD 55.99
(Indicative price - actual current price possibly lower)
Gunsmith Handgun Takedown Tools US Specifications
Technical data & information: Makes field stripping your ruger .22 pistol faster and easier by enabling rapid disassembly with a single allen wrench for routine cleaning and maintenance. Replaces the factory hammer and sticky bolt stop pin that make bolt removal a real chore. Replacement parts are precision machined from high-grade stainless steel to tolerances that meet or exceed the factory parts. Requires no permanent modification to your pistol; gunsmith installation recommended. The 3.2 conversion kit will fit any ruger .22 auto pistol and allows mk iii owners to safely omit the magazine disconnect feature. This kit is supplied with a new hammer pivot bushing, which reduces pre-travel by 65%. Mfg: majestic arms, ltd. Specs: stainless steel, natural silver finish. Kit includes replacement hammer and bolt stop pin, plus allen wrench and illustrated installation instructions. Mark i/mark ii fits ruger mark i, ii, and 22/45 pistols. Mark iii fits ruger mark iii pistol. US specification & reliable quality gunsmith handgun takedown tools by Majestic. Part Nr: 941-000-003.
More Details : click here
SEARCH this site : click here
|
|
|
Majestic Arms Ltd. Ruger Mark I/Ii/Iii Speed Strip Kit 3.2 US Specifications
USD 78.99
(Indicative price - actual current price possibly lower)
Gunsmith Handgun Takedown Tools US Specifications
Technical data & information: Makes field stripping your ruger .22 pistol faster and easier by enabling rapid disassembly with a single allen wrench for routine cleaning and maintenance. Replaces the factory hammer and sticky bolt stop pin that make bolt removal a real chore. Replacement parts are precision machined from high-grade stainless steel to tolerances that meet or exceed the factory parts. Requires no permanent modification to your pistol; gunsmith installation recommended. The 3.2 conversion kit will fit any ruger .22 auto pistol and allows mk iii owners to safely omit the magazine disconnect feature. This kit is supplied with a new hammer pivot bushing, which reduces pre-travel by 65%. Mfg: majestic arms, ltd. Specs: stainless steel, natural silver finish. Kit includes replacement hammer and bolt stop pin, plus allen wrench and illustrated installation instructions. Mark i/mark ii fits ruger mark i, ii, and 22/45 pistols. Mark iii fits ruger mark iii pistol. US specification & reliable quality gunsmith handgun takedown tools by Majestic. Part Nr: 941-000-006.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells/Samson Mfg.Corp. S&W K/L/N Frame Spd Tool S&W Revolver Spd Tool US Specifications
USD 49.99
(Indicative price - actual current price possibly lower)
Gunsmith Handgun Takedown Tools US Specifications
Technical data & information: Pocket tool helps you perform most of the tasks required to maintain a smith & wesson k, l, or n frame revolver. Great for quick repairs and adjustments in the field or at the range. Includes screwdriver bits for the grip screws and strain screws, plus the screws for the side plate, yoke, cylinder thumb piece latch nut, and adjustable rear sight. Use it to remove/install the rebound slide and rebound slide spring, as well as to tighten/loosen the extractor rod without damaging the knurling on the tip of the rod. Strong internal magnets retain the driver bits and help keep small steel parts from rolling away during field or bench disassembly. Driver bits are hollow ground to ensure full-s mfg: brownells/samson mfg.Corp. Specs: 6061 t6 aluminum body, hardcoat anodized, matte black, with hardened steel 210-2 and 150-3 bits. 3ß?" (8.2cm) long, βύ" (1.9cm) wide, β½" (1.3cm) thick. 2 oz. (57g) wt. For smith & wesson k, l, and n frame revolvers. US specification & reliable quality gunsmith handgun takedown tools by Samson. Part Nr: 080-000-820.
More Details : click here
SEARCH this site : click here
|
|
|
10 8 Performance Armorer Tool Black US Specifications
USD 10.99
(Indicative price - actual current price possibly lower)
Gunsmith Handgun Takedown Tools US Specifications
Technical data & information: Handy tool of extremely tough, non-marring glass-reinforced nylon is perfect for prying and pushing applications where a metal tool can damage the part or gun finish. Rigid chisel point on one end is useful for depressing springs and spring-loaded parts-even use to thread molle straps through webbing-while the semi-flexible flat blade on the other end can get into tight spots or serve as a temporary shim. Great to have around during disassembly of semi-auto pistols like the 1911, glock, or smith & wesson m&p or when working on service rifles like the ar-15/m16. Multiple ridges molded into the grasping area in the middle of the tool help prevent slippage when working wi mfg: 10-8 performance llc specs: glass reinforced nylon, black or flat dark earth, approximately 5" (12.7cm) long, βό" (6.4mm) diameter. US specification & reliable quality gunsmith handgun takedown tools by 10-8 Performance. Part Nr: TOOLB.
More Details : click here
SEARCH this site : click here
|
|
|
Gunsmither Tools Ruger Mk I/Mk Ii Takedown Tool US Specifications
USD 16.99
(Indicative price - actual current price possibly lower)
Gunsmith Handgun Takedown Tools US Specifications
Technical data & information: Sort of like a swiss army knife, this small, self-contained, takedown tool has everything you need for field stripping your ruger. Delrin, tool body features an aluminum end cap with steel, wire loop for removing the mainspring housing latch. Punch on opposite end drives out the bolt stop pin without marring the metal. Unscrew end cap to expose the extractor removal pin. Use pin to remove the extractor, plunger and spring for cleaning or replacement. A must have for the mark i /mark ii owner. Mfg: gunsmither tools specs: body/punch, delrin, black. Extractor tool, aluminum/steel. 3-7/8" (cm) oal, β½" (1.3cm) diameter. US specification & reliable quality gunsmith handgun takedown tools by Gunsmither. Part Nr: 100-001-507.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Aro Tek Armorer's Tools For Glock 3/16" Nut Driver US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
