Brownells/Samson Mfg.Corp. S&W K/L/N Frame Spd Tool S&W Revolver Spd Tool US Specifications
Gunsmith Handgun Takedown Tools by Samson
|
Technical data & information: Pocket tool helps you perform most of the tasks required to maintain a smith & wesson k, l, or n frame revolver. Great for quick repairs and adjustments in the field or at the range. Includes screwdriver bits for the grip screws and strain screws, plus the screws for the side plate, yoke, cylinder thumb piece latch nut, and adjustable rear sight. Use it to remove/install the rebound slide and rebound slide spring, as well as to tighten/loosen the extractor rod without damaging the knurling on the tip of the rod. Strong internal magnets retain the driver bits and help keep small steel parts from rolling away during field or bench disassembly. Driver bits are hollow ground to ensure full-s mfg: brownells/samson mfg.Corp. Specs: 6061 t6 aluminum body, hardcoat anodized, matte black, with hardened steel 210-2 and 150-3 bits. 3ß?" (8.2cm) long, βύ" (1.9cm) wide, β½" (1.3cm) thick. 2 oz. (57g) wt. For smith & wesson k, l, and n frame revolvers. US specification & reliable quality gunsmith handgun takedown tools by Samson. Part Nr: 080-000-820.
 Indicative Price: USD 49.99
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more high specification gun & shooting items : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Majestic Arms Ltd. Ruger Mark I/Ii/Iii Speed Strip Kit Mark I/Ii Speed Strip Kit US Specifications
USD 55.99
(Indicative price - actual current price possibly lower)
Gunsmith Handgun Takedown Tools US Specifications
Technical data & information: Makes field stripping your ruger .22 pistol faster and easier by enabling rapid disassembly with a single allen wrench for routine cleaning and maintenance. Replaces the factory hammer and sticky bolt stop pin that make bolt removal a real chore. Replacement parts are precision machined from high-grade stainless steel to tolerances that meet or exceed the factory parts. Requires no permanent modification to your pistol; gunsmith installation recommended. The 3.2 conversion kit will fit any ruger .22 auto pistol and allows mk iii owners to safely omit the magazine disconnect feature. This kit is supplied with a new hammer pivot bushing, which reduces pre-travel by 65%. Mfg: majestic arms, ltd. Specs: stainless steel, natural silver finish. Kit includes replacement hammer and bolt stop pin, plus allen wrench and illustrated installation instructions. Mark i/mark ii fits ruger mark i, ii, and 22/45 pistols. Mark iii fits ruger mark iii pistol. US specification & reliable quality gunsmith handgun takedown tools by Majestic. Part Nr: 941-000-003.
More Details : click here
SEARCH this site : click here
|
|
|
10 8 Performance Armorer Tool Flat Dark Earth US Specifications
USD 11.99
(Indicative price - actual current price possibly lower)
Gunsmith Handgun Takedown Tools US Specifications
Technical data & information: Handy tool of extremely tough, non-marring glass-reinforced nylon is perfect for prying and pushing applications where a metal tool can damage the part or gun finish. Rigid chisel point on one end is useful for depressing springs and spring-loaded parts-even use to thread molle straps through webbing-while the semi-flexible flat blade on the other end can get into tight spots or serve as a temporary shim. Great to have around during disassembly of semi-auto pistols like the 1911, glock, or smith & wesson m&p or when working on service rifles like the ar-15/m16. Multiple ridges molded into the grasping area in the middle of the tool help prevent slippage when working wi mfg: 10-8 performance llc specs: glass reinforced nylon, black or flat dark earth, approximately 5" (12.7cm) long, βό" (6.4mm) diameter. US specification & reliable quality gunsmith handgun takedown tools by 10-8 Performance. Part Nr: TOOLFDE.
More Details : click here
SEARCH this site : click here
|
|
|
Gunsmither Tools Ruger Mk I/Mk Ii Takedown Tool US Specifications
USD 16.99
(Indicative price - actual current price possibly lower)
Gunsmith Handgun Takedown Tools US Specifications
Technical data & information: Sort of like a swiss army knife, this small, self-contained, takedown tool has everything you need for field stripping your ruger. Delrin, tool body features an aluminum end cap with steel, wire loop for removing the mainspring housing latch. Punch on opposite end drives out the bolt stop pin without marring the metal. Unscrew end cap to expose the extractor removal pin. Use pin to remove the extractor, plunger and spring for cleaning or replacement. A must have for the mark i /mark ii owner. Mfg: gunsmither tools specs: body/punch, delrin, black. Extractor tool, aluminum/steel. 3-7/8" (cm) oal, β½" (1.3cm) diameter. US specification & reliable quality gunsmith handgun takedown tools by Gunsmither. Part Nr: 100-001-507.
More Details : click here
SEARCH this site : click here
|
|
|
The All In One Tool W/Stand US Specifications
USD 18.99
(Indicative price - actual current price possibly lower)
Gunsmith Handgun Takedown Tools US Specifications
Technical data & information: The ruger mark series .22 pistols have renowned popularity, until cleaning time. We have all heard and read the stories about how frustrating disassembling and reassembling can be. Too many of us have just avoided it. No more! now, with the user friendly, all-in-one tool, there is a simpler, safer, and faster, method to clean our guns. The tool works on all the mark series i, ii, iii, and 22/45 pistols with a square recess in the mainspring housing. And without altering the gun. For new guns or excessively dirty guns, we recommend the accessory stand. The stand frees up your second hand, allowing for more pressure to be placed on the durable tool which even mfg: the right tool co. US specification & reliable quality gunsmith handgun takedown tools by Right Tool. Part Nr: STOOL.
More Details : click here
SEARCH this site : click here
|
|
|
Aro Tek Armorer's Tools For Glock 3/16" Nut Driver US Specifications
USD 24.99
(Indicative price - actual current price possibly lower)
Gunsmith Handgun Takedown Tools US Specifications
Technical data & information: Precision-made tools that will take care of most any field repair on the entire family of glock pistols. Kit includes: 3/16" nut driver for easy, front sight removal; .050" allen wrench for rear sight removal, installation and adjustment; and a 3/32" punch for complete takedown. Tools feature hardened shafts and comfortable aluminum handles. Comes in convenient, snap-top, heavy-duty vinyl pouch. Mfg: aro-tek specs: shaft-steel, blued. Handle, aluminum, anodized red. 3ß?" (9.5cm) long. 3/16" nut driver available separately. US specification & reliable quality gunsmith handgun takedown tools by Aro-Tek. Part Nr: 3008003.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Disassembly Tool For Glock US Specifications
USD 10.99
(Indicative price - actual current price possibly lower)
Gunsmith Handgun Takedown Tools US Specifications
Technical data & information: The brownells disassembly tool for glock pistols makes taking apart any glock pistol a piece of cake! no more struggling with small, cheap punches that are just barely large enough to get the job done (with a few four-letter words uttered by the user along the way). Our brownells disassembly tool for glock pistols has a comfortable, easy-to-grasp handle, a real, screwdriver-style handle, that fits even the largest paws! deep flutes on the shockproof, polymer handle provide a secure, non-slip gripping surface. You maintain better control of the tool, reducing the risk of slipping and damaging your pistol's slide finish or polymer frame. Heavy-duty, 2-3/4" lon mfg: brownells. US specification & reliable quality gunsmith handgun takedown tools by Brownells. Part Nr: 080-001-365.
More Details : click here
SEARCH this site : click here
|
|
|
Glock Disassembly Tool US Specifications
USD 9.99
(Indicative price - actual current price possibly lower)
Gunsmith Handgun Takedown Tools US Specifications
Technical data & information: Original glock factory disassembly tool lets you completely disassemble any glock pistol. Assists in removal locking block pin, trigger housing pin, and trigger pin. Depresses magazine floorplate catch for removal of plate for cleaning or replacement of spring and follower. Hardened steel pin shaft with deeply ridged, easy-to-grasp polymer handle. Mfg: glock specs: steel with polymer handle, black. 3ß?" (9.5cm) o.A.L. 1-3/8" (3.5mm) shank length. .100" (2.5mm) shank diameter. US specification & reliable quality gunsmith handgun takedown tools by Glock. Part Nr: 3374.
More Details : click here
SEARCH this site : click here
|
|
|
10 8 Performance Armorer Tool Black US Specifications
USD 10.99
(Indicative price - actual current price possibly lower)
Gunsmith Handgun Takedown Tools US Specifications
Technical data & information: Handy tool of extremely tough, non-marring glass-reinforced nylon is perfect for prying and pushing applications where a metal tool can damage the part or gun finish. Rigid chisel point on one end is useful for depressing springs and spring-loaded parts-even use to thread molle straps through webbing-while the semi-flexible flat blade on the other end can get into tight spots or serve as a temporary shim. Great to have around during disassembly of semi-auto pistols like the 1911, glock, or smith & wesson m&p or when working on service rifles like the ar-15/m16. Multiple ridges molded into the grasping area in the middle of the tool help prevent slippage when working wi mfg: 10-8 performance llc specs: glass reinforced nylon, black or flat dark earth, approximately 5" (12.7cm) long, βό" (6.4mm) diameter. US specification & reliable quality gunsmith handgun takedown tools by 10-8 Performance. Part Nr: TOOLB.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells/Samson Mfg.Corp. Sig Sauer Pistol Spd Tool US Specifications
USD 49.99
(Indicative price - actual current price possibly lower)
Gunsmith Handgun Takedown Tools US Specifications
Technical data & information: Ultra-compact, pocket tool makes disassembly of sig sauer pistols fast and easy. Use to remove or install grip screws, magazine catch and support plate, pivot pins, sear and decocker springs, and the mainspring assembly on both current-production and older pistols. Also aids in disassembling magazines for cleaning and maintenance. Strong internal magnets retain the replaceable (βό" hex drive) screwdriver bit and help keep small parts from rolling away during disassembly. Mfg: brownells/samson mfg.Corp. Specs: body 6061 t6 aluminum, hardcoat anodized, matte black. Driver bit & disassembly pin punch stainless steel. 2ß½" (6.35cm) long, β½" (1.27cm) wide, βύ" (1.9cm) high. 1.6 oz. (45g) weight. For sig sauer p220, p225, p226, p228, p239, and p245 d. US specification & reliable quality gunsmith handgun takedown tools by Samson. Part Nr: 080-000-721.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Brownells/Samson Mfg.Corp. S&W K/L/N Frame Spd Tool S&W Revolver Spd Tool US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
