Arrington Accuracy Works Ar 15/M16 Colt Law Enforcement Carbine Armorer's Wrench Barrel Nut Wrench US Specifications
|
|
Arrington Accuracy Works Ar 15/M16 Colt Law Enforcement Carbine Armorer's Wrench Barrel Nut Wrench US Specifications
Gunsmith Rifle Wrenches by Arrington
|
Technical data & information: Dedicated, heavy-duty wrenches are designed to enable easy removal and installation of the proprietary barrel nut on the colt le6940 advanced law enforcement carbine (alec). Self-contained armorer wrench features a large, 3/8" thick handle with a β½" square cutout for a torque wrench or breaker bar, plus a notch for removing the alec flash suppressor. Compact barrel nut wrench has the β½" torque driver/breaker bar cutout only. Mfg: arrington accuracy works specs: steel, parkerized, matte black. Armorer wrench, 9" (23cm) long overall, 1.25" (3.17cm) wide handle. US specification & reliable quality gunsmith rifle wrenches by Arrington. Part Nr: 100-005-371.
Indicative Price: USD 128.99
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more high specification gun & shooting items : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Arrington Accuracy Works Ar 15/M16 Free Float Handguard Strap Wrench Free Float Handguard Wrench US Specifications
USD 95.99
(Indicative price - actual current price possibly lower)
Gunsmith Rifle Wrenches US Specifications
Technical data & information: Heavy-duty strap wrench gives you plenty of leverage to remove screw-on free-float handguard tubes, even those sealed with thread locker or "frozen" on by corrosion between the barrel nut and guard. Large, adjustable strap of tough, reinforced rubber wraps securely around any diameter handguard, with no risk of scratching the finish, and grasps the guard tighter as you apply pressure. Lets you position the strap right over the threaded end of the tube for maximum torque transfer where it's needed most. Hefty steel handle won't bend, no matter how much force you apply, and machined aluminum head maintains optimal alignment of handguard, strap, and handle. Indispensable time-saver for professi mfg: arrington accuracy works specs: steel handle, aluminum head, rubber strap. 10" (25.4cm) o.A.L. US specification & reliable quality gunsmith rifle wrenches by Arrington. Part Nr: 100-004-209.
More Details : click here
SEARCH this site : click here
|
|
|
Smith Enterprise 308 Ar morer's Wrench .308 Armorer's Wrench US Specifications
USD 96.99
(Indicative price - actual current price possibly lower)
Gunsmith Rifle Wrenches US Specifications
Technical data & information: Extra-heavy duty armorers wrench provides easier installation and removal of all barrels up to 1βό" diameter with either encapsulated or peg-style barrel nuts. Extra-long handle features smooth, contoured edges for comfortable use. Includes β½" square drive opening for torque wrench application; 5⁄8" and βύ" slots fit receiver extensions and a1/a2 flash suppressors applications, .308 for use with ar-style .308 rifles. 3/4 inch slot may not fit some brakes, flash hiders or comps with less than .410 long driving flats. Will not work with dpms 20 tooth pattern .308 barrel nuts. Mfg: smith enterprise specs: 17-4 stainless steel, black oxide finish. 12" (30cm) long, 1" (2.5cm) wide handle. .400 thick. US specification & reliable quality gunsmith rifle wrenches by Smith. Part Nr: 1035.
More Details : click here
SEARCH this site : click here
|
|
|
Longrifles Ruger Precision Rifle Action Wrench Barrel Wrench For Ruger Precision Rifle/Ar 15 US Specifications
USD 140.99
(Indicative price - actual current price possibly lower)
Gunsmith Rifle Wrenches US Specifications
Technical data & information: The lri action wrench for ruger rpr / ar-15 is designed to aid you in fast, reliable, safe removal/installation of an ar-pattern rifle's barrel nut. This wrench will eliminate the headaches of sheared-off pins, damaged barrel nuts, failed wrenches, and blood loss from the operator (namely, you). The lri action wrench for ruger rpr / ar-15 provides secure, non-slip 360-degree contact with the barrel nut, no way this wrench will slip off! a pinch bolt gently cinches the lri action wrench to the barrel nut, eliminating offset loads that lead to slippage and damage to the barrel or its finish. Fits standard ar-15 barrel nut, dpms lr-308 & ruger precision rifl mfg: longrifles, inc. US specification & reliable quality gunsmith rifle wrenches by Longrifles. Part Nr: LRIRGRAR15WR.
More Details : click here
SEARCH this site : click here
|
|
|
Barska Ar 15 Combo Wrench Tool US Specifications
USD 24.99
(Indicative price - actual current price possibly lower)
Gunsmith Rifle Wrenches US Specifications
Technical data & information: Multi-function steel tool helps keep your rifle in the ready condition. Use it to tighten or remove the barrel nut, and install or remove most popular free-float handguard tubes. Single-point wrench tightens/removes the receiver extension nut, and side notches tighten or remove a variety of muzzle devices, including flash hiders and muzzle brakes. It even has a tab that acts as a screwdriver for the a1/a2 stock. Includes β½" drive opening. Mfg: barska specs: carbon steel, black, painted finish. 12 5⁄8" (32cm) long. US specification & reliable quality gunsmith rifle wrenches by Barska. Part Nr: AW11167.
More Details : click here
SEARCH this site : click here
|
|
|
Davidson Action Wrenches Davidson Rear Entry Action Wrench Remington Shilen Dga US Specifications
USD 84.99
(Indicative price - actual current price possibly lower)
Gunsmith Rifle Wrenches US Specifications
Technical data & information: Davidson action wrenches are designed for the switch barrel shooter with a custom built rifle. Manufactured from 7075-t6 aluminum, these tools are not designed to remove factory installed barrels. Action wrenches are used to break the action free from the barrel while the barrel is held in a barrel vise. This allows the shooter to change barrels in a matter of a few minutes. All rear action wrenches are inserted through the rear of the action and have a 3/4 inch hex end which requires a wrench for turning. Port wrenches are inserted through the action port and are turned by hand. Barrel vise available separately. Mfg: davidson. US specification & reliable quality gunsmith rifle wrenches by Davidson. Part Nr: DW2.
More Details : click here
SEARCH this site : click here
|
|
|
Precision Reflex Ar 15/M16 Barrel Nut Wrench Ar 15 Barrel Nut Wrench US Specifications
USD 35.99
(Indicative price - actual current price possibly lower)
Gunsmith Rifle Wrenches US Specifications
Technical data & information: Heavy-duty wrench provides plenty of leverage for installing and removing barrel nuts when used with a 3/8" or β½" drive breaker bar, socket wrench, or torque wrench. Cut from 3/8" thick steel, with plenty of metal so it won't flex under pressure while transferring the torque evenly to the nut. Models available for ar-15/m16, armalite. Armorer's ar-15/m16 model has a built-in 10"-long handle for convenience, plus additional holes between pins help with proper gas tube alignment. Still includes 3/8" and β½" drive cutouts. Mfg: precision reflex, inc. Specs: 1018 steel, black oxide finish. Ar-15 fits mil-spec ar-15/m16/m4 and clones. US specification & reliable quality gunsmith rifle wrenches by Precision. Part Nr: 50082.
More Details : click here
SEARCH this site : click here
|
|
|
P&L Development Ar 15 Barrel Extension Wrench US Specifications
USD 73.99
(Indicative price - actual current price possibly lower)
Gunsmith Rifle Wrenches US Specifications
Technical data & information: One model installs or removes ar-15 barrel extensions safely and easily without making a "wrench" from an old bolt head. Machined, hardened, steel engagement teeth fully engage locking lugs for precise fit; alignment sleeve holds wrench square with barrel, prevents slipping or damage. ß?" hex drive gives plenty of leverage to get really tight extensions loose. Mfg: p&l development specs: 8620 steel, blue. 2-7/8" (7.3cm) long. Heat treated to rc 48-52. US specification & reliable quality gunsmith rifle wrenches by P&L. Part Nr: 841-015-001.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Ar 15 Sight Wrench A1 Ar 15 Sight Wrench US Specifications
USD 15.99
(Indicative price - actual current price possibly lower)
Gunsmith Rifle Wrenches US Specifications
Technical data & information: Precision machined from tough, stressproof steel with square-profile fingers that grip the sight notches firmly and won't "roll out"; provides easy, exact sight adjustment. Plus, they resist bending and breaking to give years of service. Deeply drilled body fits both issue and tall blade sights. An extra-nice touch are the hex-shaped bodies; they're easy to grasp, easy to turn and won't roll off your bench. Three tools: a1 five-prong and a2 four-prong fit front and rear sights. A1/a2 is double ended to fit both five-detent a1 and four-detent, square blade, a2 front sights only. A2 wrenches also fit fn scar. Mfg: brownells specs: stressproof steel, blue finish. A1: five-prong and a2: four-prong (adjusts front and rear). 1-3/8" (3.5cm) long x βύ" (19mm) dia. A1/a2: 2β½" (6.4cm) long four-prong/five-prong front only wrench. A2 wrench is designed for the standard a-2 style front post. US specification & reliable quality gunsmith rifle wrenches by Brownells. Part Nr: 078-000-008.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Arrington Accuracy Works Ar 15/M16 Colt Law Enforcement Carbine Armorer's Wrench Barrel Nut Wrench US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
|
