Bobro Engineering Scar Dual Lever Mounts 35mm Left Side Levers Scar Mount US Specifications
Gun Optics Mount Sets by Bobro
|
Technical data & information: Dual lever mount that was initially engineered for the fn scar weapon family. We also use this mount on ar10/sr25 type weapons as the upper receiver is long enough to establish proper eye relief with most scopes. Levers can be configured on left or right side. We recommend levers on opposite side of cocking handle. If cocking handle is on the left for example, then order mount with "rr" suffix, meaning levers on the right. Left side levers will have the "ll" suffix. Can be configured with 30mm/34mm/35mm rings. Height- 1.5′ from top of rail to optic centerline. Weight 8.9 ounces. Ring spacing- 2.980′ inside to inside. Mfg: bobro engineering specs: height measured from top of rail to center of scope ring. US specification & reliable quality gun optics mount sets by Bobro. Part Nr: B17187350LL.
 Indicative Price: USD 273.99
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more high specification gun & shooting items : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
A.R.M.S. Inc Aimpoint Throw Lever Ring & Mount Mkii Throw Lever Mount US Specifications
USD 118.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: Compact, single-ring mount for aimpoint compml, compml2, compml3, or similar red dot sight requiring a single 30mm ring. The top half of the ring is machined steel for superior strength and secured by four hex-head screws (wrench included) to ensure full contact with the sight body. Spacer raises the aimpoint comp mount β½" for co-witness with iron sights when mounting directly to flattop receivers. Can also be used on #22tx30 trijicon tri-power mount. Mfg: a.R.M.S.,inc specs: mount -hardcoat anodized aluminum and parkerized steel, matte black. 2-5/16" (5.6 cm) long. 3.9 oz. (109 g) wt. Spacer aluminum, hardcoat anodized, matte black. 2.3" (58mm) long, .54"(13 mm) high. 1 oz. (28g) wt. Mounting screws included. US specification & reliable quality gun optics mount sets by ARMS. Part Nr: 22M68LII.
More Details : click here
SEARCH this site : click here
|
|
|
Talley Light Weight Scope Mount Savage With Accutrigger Extended 1" Medium Scope Mount US Specifications
USD 46.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: One-piece construction blends the ring and base into a single unit. Eliminating the ring/base joint not only keeps weight to a minimum, it provides a stronger mount. Each ring cap is 5⁄8" wide, with four, torx screws, to keep large scopes from slipping or shifting. Designed by mel forbes of new ultralight arms. Mfg: talley specs: 7000 series aluminum, black, anodized, matte finish. Accepts 1" dia. Scopes, unless otherwise listed in fits column for 30mm dia. Scopes. Height from bottom of ring to top of receiver: low, .400" (10.1mm), med, .500" (12.7mm). High, .640" (16.3mm), x‑high, .740" (18.8mm). Approx. We. US specification & reliable quality gun optics mount sets by Talley. Part Nr: 94X725.
More Details : click here
SEARCH this site : click here
|
|
|
Warne Mfg. Company Lr Skel Extended Skeletonized Msr Mounts 30mm X Skel Mount 20 Moa Tactical Gray US Specifications
USD 117.59
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: The lr-skel mount offers 20 moa built-in slope for long range precision shooting. This allows additional elevation adjustment in your optic when shooting ranges over 600 yards. The lr-skel mount is cnc precision machined from 6061 aluminum and warne has been able to reduce the weight by over 30%, compared to our r.A.M.P. Mount by utilizing a skeletonized body and ring caps. The lr-skel provides an additional inch of forward cantilever, compared to the original skel mount to provide proper eye relief when using scopes with large eye boxes and gives extra space behind the mount for accessories like the warne a645 45β° side mount adapter. Mfg: warne mfg. Company. US specification & reliable quality gun optics mount sets by Warne. Part Nr: LRSKEL30TG.
More Details : click here
SEARCH this site : click here
|
|
|
Warne Mfg. Company Ar 15/M16 R.A.M.P. Tactical Mount Tactical R.A.M.P Mount 34mm Green US Specifications
USD 186.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: The rapid acquisition multisight platform (r.A.M.P.) is a one-piece cantilever mount with integral scope rings that positions optics farther forward to provide 1" of extra space at the rear for mounting a long eye relief scope, night vision device, or magnifier. Features removable mil-std 1913 picatinny rails on the left and right sides that let you mount secondary sights 45 off-axis from the main optic. Each top ring strap is secured with four torx screws for recoil-proof holding power. Two large hex nuts and 3" long steel clamping bar lock the mount to a picatinny receiver rail. Smooth contours and radiused edges give a streamlined appearance, reduce weight, and prevent snagging. Model mfg: warne mfg. Company specs: 6061 t6 aluminum, hardcoat anodized, and steel hardware, magnesium phosphate finish, matte black. 71/8" (18.1cm) long, 23⁄8" (6cm) wide, 2βό" (5.7cm) high. Height measured from top of rail to bottom of ring: .75" (1.9cm). Approximately 9.7 oz. (275g) wei. US specification & reliable quality gun optics mount sets by Warne. Part Nr: RAMP34Z.
More Details : click here
SEARCH this site : click here
|
|
|
Talley Light Weight Scope Mount Marlin 336/1895 1" Low Scope Mount US Specifications
USD 46.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: One-piece construction blends the ring and base into a single unit. Eliminating the ring/base joint not only keeps weight to a minimum, it provides a stronger mount. Each ring cap is 5⁄8" wide, with four, torx screws, to keep large scopes from slipping or shifting. Designed by mel forbes of new ultralight arms. Mfg: talley specs: 7000 series aluminum, black, anodized, matte finish. Accepts 1" dia. Scopes, unless otherwise listed in fits column for 30mm dia. Scopes. Height from bottom of ring to top of receiver: low, .400" (10.1mm), med, .500" (12.7mm). High, .640" (16.3mm), x‑high, .740" (18.8mm). Approx. We. US specification & reliable quality gun optics mount sets by Talley. Part Nr: 930336.
More Details : click here
SEARCH this site : click here
|
|
|
Badger Ordnance Low Profile Harris Bipod Mounts Low Profile Harris Mount Picatinny US Specifications
USD 68.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: The badger ordnance low-profile harris bipod mount replaces your current mounting plate and thumbscrew to provide a more streamlined, lower-profile attachment point for harris engineering swivel-style bipods. It can be easily installed for use with any harris brm-s bipod in just a few minutes. Badger ordnance's engineers designed the low-profile harris bipod mount to be strong enough that it can even be used for barricade-braced shooting without the risk of the mount breaking. For use with harris brm-s bipods includes all necessary mounting hardware, installation tool is not included picatinny model attaches to any mil-std 1913 picatinny accessory rail mfg: badger ordnance. US specification & reliable quality gun optics mount sets by Badger. Part Nr: 53401.
More Details : click here
SEARCH this site : click here
|
|
|
Wilcox Industries Comp M Mount Aimpoint Comp M Mount US Specifications
USD 170.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: Compact tactical mount securely positions an aimpoint red dot optic the correct height above a flattop receiver rail. Fits aimpoint compc3/m2/ml2/m3/ml3 series, 3xmag magnifier, and other optics with 30mm tube that require single-ring mounting. Skeletonized construction provides full support without the weight of excess metal for an exceptionally strong, solid, yet lightweight mount. Four, steel, hex-head cap screws anchor the top ring half to the mount to ensure full contact with sight body to prevent slippage. Rail grabber clamping system secures the mount to receiver and maintains sight alignment even under the battering of sustained rapid fire. Unique, captive cross-bolt is divided lengt mfg: wilcox industries specs: aluminum, hardcoat anodized, matte black finish. Height measured from top of rail to bottom of scope tube: 1.120" (2.84cm). 3.1 oz. (88g) weight. Fits aimpoint compc3/m2/ml2/m3/ml3, 3xmag magnifier, and other optics that require a single 30mm ring mount. US specification & reliable quality gun optics mount sets by Wilcox. Part Nr: 13600G01.
More Details : click here
SEARCH this site : click here
|
|
|
Talley Light Weight Scope Mount Kimber Model 84 Current Production Medium 1" Scope Mounts US Specifications
USD 46.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: One-piece construction blends the ring and base into a single unit. Eliminating the ring/base joint not only keeps weight to a minimum, it provides a stronger mount. Each ring cap is 5⁄8" wide, with four, torx screws, to keep large scopes from slipping or shifting. Designed by mel forbes of new ultralight arms. Mfg: talley specs: 7000 series aluminum, black, anodized, matte finish. Accepts 1" dia. Scopes, unless otherwise listed in fits column for 30mm dia. Scopes. Height from bottom of ring to top of receiver: low, .400" (10.1mm), med, .500" (12.7mm). High, .640" (16.3mm), x‑high, .740" (18.8mm). Approx. We. US specification & reliable quality gun optics mount sets by Talley. Part Nr: 948749.
More Details : click here
SEARCH this site : click here
|
|
|
Warne Mfg. Company X Skel Mounts 1 Inch Red US Specifications
USD 109.19
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: Warne scope mounts is excited to introduce their second generation skel mount, the x-skel. This new msr mount offers an additional 1" of forward cantilever, and 1 piece clamp design for added strength. The rugged, lightweight design of the x-skel maintains our famous return to zero capability, and utilizes β½" hex nuts for rock solid attachment. It features a skeletonized ring body and caps for reduced weight and steel threaded cap inserts for maximum durability. The x-skel places your optic at the ideal height with a generous cantilever for proper eye relief, it will easily accommodate the longer eyepieces found on many of today's scopes. Lightweight mfg: warne mfg. Company. US specification & reliable quality gun optics mount sets by Warne. Part Nr: XSKEL1R.
More Details : click here
SEARCH this site : click here
|
|
|
Spuhr Isms Picatinny Mounts 35mm Isms Mount 139mm Mounting Length 20.6 Moa Type SP5601SHORT US Specifications
USD 410
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: The isms (ideal scope mount system) is an extremely sturdy scope mount, with the possibility to attach multiple optical accessories directly to the mount. Built-in scope level and 45-degree split of the rings provides unobstructed view of your optics knobs. The durable design of the mounts prevents damage to the scope due to flexing during heavy recoil. The rings are grooved on the inside for better grip and the mount base is milled from a sinlge billet of aluminum. Mounts include an innovative tool to index your scope properly to the mount and gun. Mounts have a minimum of 7 interfaces for accessories to be mounted. The rings are cut at a 45 degree angle instead of horizontally, prov mfg: spuhr. US specification & reliable quality gun optics mount sets by Spuhr. Part Nr: SP5601SHORT.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Bobro Engineering Scar Dual Lever Mounts 35mm Left Side Levers Scar Mount US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
