Brownells High Speed Countersink No. 3 Drill Dia. 7/64" Body Dia. 1/4" US Specifications
|
|
Brownells High Speed Countersink No. 3 Drill Dia. 7/64" Body Dia. 1/4" US Specifications
Gunsmith Machinist Accessories by Brownells
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Starrett Angle Meter US Specifications
USD 17.99
(Indicative price - actual current price possibly lower)
Gunsmith Machinist Accessories US Specifications
Technical data & information: High-impact polymer angle meter is ideal for leveling, setting and verifying the proper angle on milling decks, drill press vises, surface grinders, and stock duplicators. Features a large, easy-to-see scale for accurate measurements from 0 to 90 degrees in any quadrant, plus a built-in magnetic base for hands-free operation on metallic objects. Measures any angle for pitch or slope and includes an easy-to-read table for converting rise and run information. Mfg: starrett specs: polymer with magnetic base. 4ß?" (10.8cm) long, 5⁄8" (1.6cm) wide, 5" (12.7cm) high. Measures to β½ degree. US specification & reliable quality gunsmith machinist accessories by Starrett. Part Nr: 36080.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Toolmakers Parallel Clamps #010 Toolmakers Clamp US Specifications
USD 21.99
(Indicative price - actual current price possibly lower)
Gunsmith Machinist Accessories US Specifications
Technical data & information: Universally used by toolmakers and gunsmiths for close, precision holding of unusual shapes for welding, brazing, scribing, drilling. A must for scope, sight or bolt work. Mfg: brownells specs: #005, 2" (5.1cm) long jaws, 1.285" (3.3cm) jaw spread. #010, 3" (7.6cm) long jaws, 2.185" (5.5cm) jaw spread. #015, 4" (10.2cm) long jaws, 2.95" (7.5cm) jaw spread. US specification & reliable quality gunsmith machinist accessories by Brownells. Part Nr: 52465010.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Crown Saver Lathe Center Cover Small Crown Saver 10 Pak US Specifications
USD 29.99
(Indicative price - actual current price possibly lower)
Gunsmith Machinist Accessories US Specifications
Technical data & information: These brass cones take much of the anxiety out of lathe-turning a perfectly good barrel with an already finished crown. Insert a crown saver between the muzzle and lathe or mill center before fluting, chambering, polishing, or threading for a muzzle brake, and you can rest assured you won't harm the rifling or ding the crown. Each brass cone is machined to within .0002" or less concentricity, making using a crown saver as accurate as direct barrel contact against the center. With a crown saver, you virtually eliminate any chance of swaging the rifling. It stays seated and will not spin in the bore when the barrel is chucked in the lathe. Small fits bores .17 to .45 caliber. Large mfg: brownells specs: 360 brass. Maximum diameter. Small, .500", large, .750". US specification & reliable quality gunsmith machinist accessories by Brownells. Part Nr: 80000379.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Toolmakers Parallel Clamps #005 Toolmakers Clamp US Specifications
USD 19.99
(Indicative price - actual current price possibly lower)
Gunsmith Machinist Accessories US Specifications
Technical data & information: Universally used by toolmakers and gunsmiths for close, precision holding of unusual shapes for welding, brazing, scribing, drilling. A must for scope, sight or bolt work. Mfg: brownells specs: #005, 2" (5.1cm) long jaws, 1.285" (3.3cm) jaw spread. #010, 3" (7.6cm) long jaws, 2.185" (5.5cm) jaw spread. #015, 4" (10.2cm) long jaws, 2.95" (7.5cm) jaw spread. US specification & reliable quality gunsmith machinist accessories by Brownells. Part Nr: 52465005.
More Details : click here
SEARCH this site : click here
|
|
|
Fisher Machine Shop Pee Dee Thread Measuring Wires Pee Dee Thread Wire Set US Specifications
USD 45.99
(Indicative price - actual current price possibly lower)
Gunsmith Machinist Accessories US Specifications
Technical data & information: Quickly and accurately measures pitch diameters of external threads-a must-have when cutting or checking threads on precision screws. Accurate to within /- .0001" along the center 1" section. Measures the following pitch sizes: 3 to 48 tpi, .5mm to 6mm pitch, and acme 3 to 16 tpi. Includes plastic storage sleeve, conversion chart and instructions. Requires micrometer, not included. Mfg: fisher machine shop, inc. Specs: steel, 2βύ" (7cm) oal. Contains 16 different wire sizes, (3) of each diameter: .018" (.45mm), .024" (.61mm); .029" (.74mm), .032" (.81mm), .040" (1mm); .045" (1.1mm), .055" (1.4mm), .063" (1.6mm), .072" (1.8mm), .081" (2.1mm), .092&. US specification & reliable quality gunsmith machinist accessories by Fisher. Part Nr: 16.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Machine Setup Gauge US Specifications
USD 57.99
(Indicative price - actual current price possibly lower)
Gunsmith Machinist Accessories US Specifications
Technical data & information: Easily centers cutting tools for conventional lathe operations on either flat or rounded stock. For milling operations, makes indexing of squares, hexes, triangle, parallels and flats fast, easy and exact to min. Of angle. All surfaces are machined true to all other surfaces so can be used in literally hundreds of setup operations. Built-in level. Mfg: brownells specs: aluminum, silver, matte finish. 1-7/16" (3.65cm) x 1-7/16" x β½" (12.7mm). US specification & reliable quality gunsmith machinist accessories by Brownells. Part Nr: 100233.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Crown Saver Lathe Center Cover Large Crown Saver 3 Pak US Specifications
USD 19.99
(Indicative price - actual current price possibly lower)
Gunsmith Machinist Accessories US Specifications
Technical data & information: These brass cones take much of the anxiety out of lathe-turning a perfectly good barrel with an already finished crown. Insert a crown saver between the muzzle and lathe or mill center before fluting, chambering, polishing, or threading for a muzzle brake, and you can rest assured you won't harm the rifling or ding the crown. Each brass cone is machined to within .0002" or less concentricity, making using a crown saver as accurate as direct barrel contact against the center. With a crown saver, you virtually eliminate any chance of swaging the rifling. It stays seated and will not spin in the bore when the barrel is chucked in the lathe. Small fits bores .17 to .45 caliber. Large mfg: brownells specs: 360 brass. Maximum diameter. Small, .500", large, .750". US specification & reliable quality gunsmith machinist accessories by Brownells. Part Nr: 080-000-869.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Screw Slot Fixture US Specifications
USD 44.99
(Indicative price - actual current price possibly lower)
Gunsmith Machinist Accessories US Specifications
Technical data & information: Heat-treated, steel fixture makes it possible to cut screw slots precisely in the center of the head. Simplifies fitting new screws to a custom gun or recutting/repairing some on a classic. Clamping thumb screw locks the gun screw in the exact position you want; two sets of roller pins guide your saw or slotting file during cutting to produce screw slots with a look of true class. Mfg: brownells specs: heat-treated steel, black, oxide finish. 2" (5.1cm) long, 1βό" (3.2cm) wide, 7/8" (22.2mm) high. For use with .025" thick files and blades. US specification & reliable quality gunsmith machinist accessories by Brownells. Part Nr: 080-000-082.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Toolmakers Parallel Clamps #015 Toolmakers Clamp US Specifications
USD 30.99
(Indicative price - actual current price possibly lower)
Gunsmith Machinist Accessories US Specifications
Technical data & information: Universally used by toolmakers and gunsmiths for close, precision holding of unusual shapes for welding, brazing, scribing, drilling. A must for scope, sight or bolt work. Mfg: brownells specs: #005, 2" (5.1cm) long jaws, 1.285" (3.3cm) jaw spread. #010, 3" (7.6cm) long jaws, 2.185" (5.5cm) jaw spread. #015, 4" (10.2cm) long jaws, 2.95" (7.5cm) jaw spread. US specification & reliable quality gunsmith machinist accessories by Brownells. Part Nr: 52465015.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Brownells High Speed Countersink No. 3 Drill Dia. 7/64" Body Dia. 1/4" US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
|
